From: Steve Sakoman <steve@sakoman.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH RFC] ARMV7: OMAP: Fix build after introduction of GENERATED_GBL_DATA_SIZE
Date: Wed, 27 Oct 2010 07:07:42 -0700 [thread overview]
Message-ID: <1288188462.2342.135.camel@quadra> (raw)
This patch fixes the issue by defining and using CONFIG_SYS_INIT_RAM_SIZE and
CONFIG_SYS_INIT_RAM_ADDR. Based on an email discussion with Wolfgang Denk and
Heiko Schocher.
Signed-off-by: Steve Sakoman <steve.sakoman@linaro.org>
---
Tested on Overo. Will test on all available boards later today.
diff --git a/include/configs/igep0020.h b/include/configs/igep0020.h
index 16d9279..a970ad2 100644
--- a/include/configs/igep0020.h
+++ b/include/configs/igep0020.h
@@ -222,6 +222,10 @@
#endif /* (CONFIG_CMD_NET) */
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR (LOW_LEVEL_SRAM_STACK - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE 0x800
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
#endif /* __CONFIG_H */
diff --git a/include/configs/igep0030.h b/include/configs/igep0030.h
index d6fbec7..031de35 100644
--- a/include/configs/igep0030.h
+++ b/include/configs/igep0030.h
@@ -209,6 +209,10 @@
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10))
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR (LOW_LEVEL_SRAM_STACK - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE 0x800
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
#endif /* __CONFIG_H */
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index e7d5bd0..076dd5a 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -346,8 +346,11 @@ extern unsigned int boot_flash_sec;
extern unsigned int boot_flash_type;
#endif
-/* additions for new relocation code, must be added to all boards */
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR (LOW_LEVEL_SRAM_STACK - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE 0x800
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
#endif /* __CONFIG_H */
diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index 052d503..79a5b85 100644
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -325,6 +325,10 @@ extern unsigned int boot_flash_type;
#endif /* (CONFIG_CMD_NET) */
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR (LOW_LEVEL_SRAM_STACK - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE 0x800
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
#endif /* __CONFIG_H */
diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h
index 9dda2a3..76131fd 100644
--- a/include/configs/omap4_panda.h
+++ b/include/configs/omap4_panda.h
@@ -227,6 +227,10 @@
#define CONFIG_NR_DRAM_BANKS 1
#define CONFIG_SYS_SDRAM_BASE 0x80000000
-#define CONFIG_SYS_INIT_SP_ADDR (LOW_LEVEL_SRAM_STACK - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR 0x4030E000
+#define CONFIG_SYS_INIT_RAM_SIZE 0x800
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
#endif /* __CONFIG_H */
diff --git a/include/configs/omap4_sdp4430.h b/include/configs/omap4_sdp4430.h
index 36471ba..3d4d3a7 100644
--- a/include/configs/omap4_sdp4430.h
+++ b/include/configs/omap4_sdp4430.h
@@ -245,6 +245,10 @@
#define CONFIG_NR_DRAM_BANKS 1
#define CONFIG_SYS_SDRAM_BASE 0x80000000
-#define CONFIG_SYS_INIT_SP_ADDR (LOW_LEVEL_SRAM_STACK - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR 0x4030E000
+#define CONFIG_SYS_INIT_RAM_SIZE 0x800
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
#endif /* __CONFIG_H */
next reply other threads:[~2010-10-27 14:07 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-27 14:07 Steve Sakoman [this message]
2010-10-27 14:34 ` [U-Boot] [PATCH RFC] ARMV7: OMAP: Fix build after introduction of GENERATED_GBL_DATA_SIZE Heiko Schocher
2010-10-27 14:56 ` Paulraj, Sandeep
2010-10-27 15:11 ` Wolfgang Denk
2010-10-27 17:12 ` Steve Sakoman
2010-10-27 17:32 ` Paulraj, Sandeep
2010-11-02 14:44 ` Steve Sakoman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1288188462.2342.135.camel@quadra \
--to=steve@sakoman.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.