From: ratbert.chuang at gmail.com <ratbert.chuang@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 1/2] arm: a320 timer: move static data to global_data struct
Date: Mon, 1 Nov 2010 16:06:15 +0800 [thread overview]
Message-ID: <1288598775-1898-1-git-send-email-ratbert.chuang@gmail.com> (raw)
From: Po-Yu Chuang <ratbert@faraday-tech.com>
timer.c used static data and are called before relocation.
Move all static variables into global_data structure. Also cleanup
timer.c from unused stubs and make it truly use 64 bit tick values.
Based on Reinhard Meyer <u-boot@emk-elektronik.de>'s patch
5dca710a3d7703e41da0e9894f2d71f9e25bea6b
Signed-off-by: Po-Yu Chuang <ratbert@faraday-tech.com>
---
arch/arm/cpu/arm920t/a320/timer.c | 137 ++++++++++++++----------------------
arch/arm/include/asm/global_data.h | 5 ++
board/faraday/a320evb/config.mk | 35 ---------
include/configs/a320evb.h | 2 +
4 files changed, 59 insertions(+), 120 deletions(-)
delete mode 100644 board/faraday/a320evb/config.mk
diff --git a/arch/arm/cpu/arm920t/a320/timer.c b/arch/arm/cpu/arm920t/a320/timer.c
index d2e316f..ac48328 100644
--- a/arch/arm/cpu/arm920t/a320/timer.c
+++ b/arch/arm/cpu/arm920t/a320/timer.c
@@ -18,10 +18,13 @@
*/
#include <common.h>
+#include <div64.h>
#include <asm/io.h>
#include <asm/arch/ftpmu010.h>
#include <asm/arch/fttmr010.h>
+DECLARE_GLOBAL_DATA_PTR;
+
static ulong timestamp;
static ulong lastdec;
@@ -31,6 +34,22 @@ static struct ftpmu010 *pmu = (struct ftpmu010 *)CONFIG_FTPMU010_BASE;
#define TIMER_CLOCK 32768
#define TIMER_LOAD_VAL 0xffffffff
+static inline unsigned long long tick_to_time(unsigned long long tick)
+{
+ tick *= CONFIG_SYS_HZ;
+ do_div(tick, TIMER_CLOCK);
+
+ return tick;
+}
+
+static inline unsigned long long usec_to_tick(unsigned long long usec)
+{
+ usec *= TIMER_CLOCK;
+ do_div(usec, 1000000);
+
+ return TIMER_LOAD_VAL - usec;
+}
+
int timer_init(void)
{
unsigned int oscc;
@@ -76,115 +95,63 @@ int timer_init(void)
cr |= FTTMR010_TM3_ENABLE;
writel(cr, &tmr->cr);
- /* init the timestamp and lastdec value */
- reset_timer_masked();
+ gd->tbu = gd->tbl = 0;
return 0;
}
/*
- * timer without interrupts
- */
-
-/*
- * reset time
+ * Get the current 64 bit timer tick count
*/
-void reset_timer_masked(void)
+unsigned long long get_ticks(void)
{
- /* capure current decrementer value time */
- lastdec = readl(&tmr->timer3_counter) / (TIMER_CLOCK / CONFIG_SYS_HZ);
- timestamp = 0; /* start "advancing" time stamp from 0 */
-
- debug("%s(): lastdec = %lx\n", __func__, lastdec);
-}
+ ulong now = TIMER_LOAD_VAL - readl(&tmr->timer3_counter);
-void reset_timer(void)
-{
debug("%s()\n", __func__);
- reset_timer_masked();
-}
-/*
- * return timer ticks
- */
-ulong get_timer_masked(void)
-{
- /* current tick value */
- ulong now = readl(&tmr->timer3_counter) / (TIMER_CLOCK / CONFIG_SYS_HZ);
-
- debug("%s(): now = %lx, lastdec = %lx\n", __func__, now, lastdec);
-
- if (lastdec >= now) {
- /*
- * normal mode (non roll)
- * move stamp fordward with absoulte diff ticks
- */
- timestamp += lastdec - now;
- } else {
- /*
- * we have overflow of the count down timer
- *
- * nts = ts + ld + (TLV - now)
- * ts=old stamp, ld=time that passed before passing through -1
- * (TLV-now) amount of time after passing though -1
- * nts = new "advancing time stamp"...it could also roll and
- * cause problems.
- */
- timestamp += lastdec + TIMER_LOAD_VAL - now;
- }
-
- lastdec = now;
-
- debug("%s() returns %lx\n", __func__, timestamp);
-
- return timestamp;
-}
-
-/*
- * return difference between timer ticks and base
- */
-ulong get_timer(ulong base)
-{
- debug("%s(%lx)\n", __func__, base);
- return get_timer_masked() - base;
-}
-
-void set_timer(ulong t)
-{
- debug("%s(%lx)\n", __func__, t);
- timestamp = t;
+ /* increment tbu if tbl has rolled over */
+ if (now < gd->tbl)
+ gd->tbu++;
+ gd->tbl = now;
+ return (((unsigned long long)gd->tbu) << 32) | gd->tbl;
}
/* delay x useconds AND preserve advance timestamp value */
void __udelay(unsigned long usec)
{
- long tmo = usec * (TIMER_CLOCK / 1000) / 1000;
- unsigned long now, last = readl(&tmr->timer3_counter);
-
- debug("%s(%lu)\n", __func__, usec);
- while (tmo > 0) {
- now = readl(&tmr->timer3_counter);
- if (now > last) /* count down timer overflow */
- tmo -= TIMER_LOAD_VAL + last - now;
- else
- tmo -= last - now;
- last = now;
- }
+ unsigned long long tmp;
+ ulong tmo;
+
+ tmo = usec_to_tick(usec);
+ tmp = get_ticks() + tmo; /* get current timestamp */
+
+ while (get_ticks() < tmp) /* loop till event */
+ ;
}
/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
+ * reset_timer() and get_timer(base) are a pair of functions that are used by
+ * some timeout/sleep mechanisms in u-boot.
+ *
+ * reset_timer() marks the current time as epoch and
+ * get_timer(base) works relative to that epoch.
+ *
+ * The time is used in CONFIG_SYS_HZ units!
*/
-unsigned long long get_ticks(void)
+void reset_timer(void)
{
debug("%s()\n", __func__);
- return get_timer(0);
+ gd->timer_reset_value = get_ticks();
+}
+
+ulong get_timer(ulong base)
+{
+ debug("%s(%lx)\n", __func__, base);
+ return tick_to_time(get_ticks() - gd->timer_reset_value) - base;
}
/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
+ * Return the number of timer ticks per second.
*/
ulong get_tbclk(void)
{
diff --git a/arch/arm/include/asm/global_data.h b/arch/arm/include/asm/global_data.h
index ada3fbb..04c1564 100644
--- a/arch/arm/include/asm/global_data.h
+++ b/arch/arm/include/asm/global_data.h
@@ -61,6 +61,11 @@ typedef struct global_data {
unsigned long tbu;
unsigned long long timer_reset_value;
#endif
+#ifdef CONFIG_FTTMR010_BASE
+ unsigned long tbl;
+ unsigned long tbu;
+ unsigned long long timer_reset_value;
+#endif
unsigned long relocaddr; /* Start address of U-Boot in RAM */
phys_size_t ram_size; /* RAM size */
unsigned long mon_len; /* monitor len */
diff --git a/board/faraday/a320evb/config.mk b/board/faraday/a320evb/config.mk
deleted file mode 100644
index b751d0d..0000000
--- a/board/faraday/a320evb/config.mk
+++ /dev/null
@@ -1,35 +0,0 @@
-#
-# (C) Copyright 2009 Faraday Technology
-# Po-Yu Chuang <ratbert@faraday-tech.com>
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-# Faraday A320 board with FA526/FA626TE/ARM926EJ-S cpus
-#
-# see http://www.faraday-tech.com/ for more information
-
-# A320 has 1 bank of 64 MB DRAM
-#
-# 1000'0000 to 1400'0000
-#
-# Linux-Kernel is expected to be at 1000'8000, entry 1000'8000
-#
-# we load ourself to 13f8'0000
-#
-# download area is 1200'0000
-
-CONFIG_SYS_TEXT_BASE = 0x13f80000
diff --git a/include/configs/a320evb.h b/include/configs/a320evb.h
index f67cf06..0284d40 100644
--- a/include/configs/a320evb.h
+++ b/include/configs/a320evb.h
@@ -148,6 +148,8 @@
#define CONFIG_SYS_MEMTEST_START 0x10000000
#define CONFIG_SYS_MEMTEST_END 0x13F00000
+#define CONFIG_SYS_TEXT_BASE 0
+
/*-----------------------------------------------------------------------
* Static memory controller configuration
*/
--
1.6.3.3
next reply other threads:[~2010-11-01 8:06 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-01 8:06 ratbert.chuang at gmail.com [this message]
2010-11-01 8:37 ` [U-Boot] [PATCH 1/2] arm: a320 timer: move static data to global_data struct Reinhard Meyer
2010-11-01 8:44 ` Po-Yu Chuang
2010-12-20 9:00 ` [U-Boot] [PATCH v2 " Po-Yu Chuang
2011-01-17 2:56 ` Po-Yu Chuang
2011-01-18 21:45 ` Wolfgang Denk
2011-01-19 1:56 ` Po-Yu Chuang
2011-01-24 21:18 ` Albert ARIBAUD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1288598775-1898-1-git-send-email-ratbert.chuang@gmail.com \
--to=ratbert.chuang@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.