From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Mon, 8 Nov 2010 16:14:05 -0000 (GMT) From: edward.robbins@domain.hid MIME-Version: 1.0 Content-Type: text/plain;charset=UTF-8 Content-Transfer-Encoding: quoted-printable In-Reply-To: <4CD817BB.80404@domain.hid> References: <1289211836.298721730@domain.hid> <4CD817BB.80404@domain.hid> Message-ID: <1289232845.384714670@domain.hid> Subject: Re: [Xenomai-help] Supported cPCI systems List-Id: Help regarding installation and common use of Xenomai List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: Thomas Lockhart Cc: "xenomai@xenomai.org" Hi, and thanks for your response. A couple of questions:=0A=0ADoes the PP42= 1 work with consistently low latencies? =0ADid you need to modify Xenomai o= r the kernel at all? =0ACould you tell me what kernel and xenomai versions = you are using?=0A=0AThanks,=0AEdward=0A=0AOn Monday, 8 November, 2010 3:31p= m, "Thomas Lockhart" said:=0A=0A>> since I h= ave been unsuccessful getting Xenomai to work on our MEN=0A>> F19P and F17 = systems, I would like to hear from anyone who has had=0A>> success with oth= er cPCI based systems - preferably x86 with dual=0A>> processor support, bu= t failing that anything will do at this point.=0A> =0A> We have had success= with a dual-processor cPCI Xeon board from=0A> Concurrent Technologies (a = PP421 I think).=0A> =0A> I have another board from them (a PP531 I think) w= hich will not boot=0A> recent Linux kernels (past 2.6.27 or so) including t= he FC13 distro disk.=0A> The company claims FC13 is supported so I don't kn= ow what is up with=0A> that. So far they have not been helpful on that fron= t. I haven't done=0A> much with Xenomai on that board but I think it builds= and runs with a=0A> 2.6.26-based kernel.=0A> =0A> hth=0A> =0A> = - Tom=0A> =0A