From mboxrd@z Thu Jan 1 00:00:00 1970 From: Samreen Subject: [Repost][PATCH v3 0/2] OMAP3: Display Support Date: Tue, 16 Nov 2010 09:23:38 +0530 Message-ID: <1289879620-4696-1-git-send-email-samreen@ti.com> Return-path: Received: from comal.ext.ti.com ([198.47.26.152]:59720 "EHLO comal.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756437Ab0KPD7F (ORCPT ); Mon, 15 Nov 2010 22:59:05 -0500 Sender: linux-omap-owner@vger.kernel.org List-Id: linux-omap@vger.kernel.org To: Tomi Valkeinen , Tony Lindgren , Russell King , linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org Cc: Mukund Mittal , Santosh Shilimkar , Vikram Pandita , Samreen This patch series adds the Display Support for OMAP3 platforms and the corresponding changes in the board files. Version3: - Rebase to the latest LO Version2: - Optimised to configure INTBR from gpio to PWM1 mode setting and enabling of the PWM1 mode only when its not in PWM1 mode. Kishore Y (2): OMAP3: ZOOM2/3/3630SDP: Add display board file for OMAP3 OMAP3: Enable display on ZOOM2/3/3630SDP arch/arm/mach-omap2/Makefile | 3 + arch/arm/mach-omap2/board-3630sdp.c | 1 + arch/arm/mach-omap2/board-zoom-display.c | 168 +++++++++++++++++++++++++ arch/arm/mach-omap2/board-zoom-peripherals.c | 49 +++++++- arch/arm/mach-omap2/board-zoom2.c | 1 + arch/arm/mach-omap2/board-zoom3.c | 1 + arch/arm/mach-omap2/include/mach/board-zoom.h | 3 + 7 files changed, 224 insertions(+), 2 deletions(-) create mode 100644 arch/arm/mach-omap2/board-zoom-display.c From mboxrd@z Thu Jan 1 00:00:00 1970 From: samreen@ti.com (Samreen) Date: Tue, 16 Nov 2010 09:23:38 +0530 Subject: [Repost][PATCH v3 0/2] OMAP3: Display Support Message-ID: <1289879620-4696-1-git-send-email-samreen@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This patch series adds the Display Support for OMAP3 platforms and the corresponding changes in the board files. Version3: - Rebase to the latest LO Version2: - Optimised to configure INTBR from gpio to PWM1 mode setting and enabling of the PWM1 mode only when its not in PWM1 mode. Kishore Y (2): OMAP3: ZOOM2/3/3630SDP: Add display board file for OMAP3 OMAP3: Enable display on ZOOM2/3/3630SDP arch/arm/mach-omap2/Makefile | 3 + arch/arm/mach-omap2/board-3630sdp.c | 1 + arch/arm/mach-omap2/board-zoom-display.c | 168 +++++++++++++++++++++++++ arch/arm/mach-omap2/board-zoom-peripherals.c | 49 +++++++- arch/arm/mach-omap2/board-zoom2.c | 1 + arch/arm/mach-omap2/board-zoom3.c | 1 + arch/arm/mach-omap2/include/mach/board-zoom.h | 3 + 7 files changed, 224 insertions(+), 2 deletions(-) create mode 100644 arch/arm/mach-omap2/board-zoom-display.c