All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Samuel Ortiz <sameo@linux.intel.com>
Cc: linux-kernel@vger.kernel.org,
	patches@opensource.wolfsonmicro.com,
	Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH 5/7] mfd: Convert WM835x to new irq_ interrupt methods
Date: Wed, 24 Nov 2010 18:01:43 +0000	[thread overview]
Message-ID: <1290621705-6926-5-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <20101124180055.GO24970@rakim.wolfsonmicro.main>

Kernel 2.6.37 adds new interrupt methods which take a struct irq_data
rather than an irq number. Convert over to these as they will become
mandatory in future.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 drivers/mfd/wm8350-irq.c |   32 +++++++++++++++++---------------
 1 files changed, 17 insertions(+), 15 deletions(-)

diff --git a/drivers/mfd/wm8350-irq.c b/drivers/mfd/wm8350-irq.c
index f56c9ad..ba966ae 100644
--- a/drivers/mfd/wm8350-irq.c
+++ b/drivers/mfd/wm8350-irq.c
@@ -417,16 +417,16 @@ static irqreturn_t wm8350_irq(int irq, void *irq_data)
 	return IRQ_HANDLED;
 }
 
-static void wm8350_irq_lock(unsigned int irq)
+static void wm8350_irq_lock(struct irq_data *data)
 {
-	struct wm8350 *wm8350 = get_irq_chip_data(irq);
+	struct wm8350 *wm8350 = data->chip_data;
 
 	mutex_lock(&wm8350->irq_lock);
 }
 
-static void wm8350_irq_sync_unlock(unsigned int irq)
+static void wm8350_irq_sync_unlock(struct irq_data *data)
 {
-	struct wm8350 *wm8350 = get_irq_chip_data(irq);
+	struct wm8350 *wm8350 = data->chip_data;
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(wm8350->irq_masks); i++) {
@@ -442,28 +442,30 @@ static void wm8350_irq_sync_unlock(unsigned int irq)
 	mutex_unlock(&wm8350->irq_lock);
 }
 
-static void wm8350_irq_enable(unsigned int irq)
+static void wm8350_irq_enable(struct irq_data *data)
 {
-	struct wm8350 *wm8350 = get_irq_chip_data(irq);
-	struct wm8350_irq_data *irq_data = irq_to_wm8350_irq(wm8350, irq);
+	struct wm8350 *wm8350 = data->chip_data;
+	struct wm8350_irq_data *irq_data = irq_to_wm8350_irq(wm8350,
+							     data->irq);
 
 	wm8350->irq_masks[irq_data->reg] &= ~irq_data->mask;
 }
 
-static void wm8350_irq_disable(unsigned int irq)
+static void wm8350_irq_disable(struct irq_data *data)
 {
-	struct wm8350 *wm8350 = get_irq_chip_data(irq);
-	struct wm8350_irq_data *irq_data = irq_to_wm8350_irq(wm8350, irq);
+	struct wm8350 *wm8350 = data->chip_data;
+	struct wm8350_irq_data *irq_data = irq_to_wm8350_irq(wm8350,
+							     data->irq);
 
 	wm8350->irq_masks[irq_data->reg] |= irq_data->mask;
 }
 
 static struct irq_chip wm8350_irq_chip = {
-	.name = "wm8350",
-	.bus_lock = wm8350_irq_lock,
-	.bus_sync_unlock = wm8350_irq_sync_unlock,
-	.disable = wm8350_irq_disable,
-	.enable = wm8350_irq_enable,
+	.name			= "wm8350",
+	.irq_bus_lock		= wm8350_irq_lock,
+	.irq_bus_sync_unlock	= wm8350_irq_sync_unlock,
+	.irq_disable		= wm8350_irq_disable,
+	.irq_enable		= wm8350_irq_enable,
 };
 
 int wm8350_irq_init(struct wm8350 *wm8350, int irq,
-- 
1.7.1


  parent reply	other threads:[~2010-11-24 18:02 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-11-24 18:00 [PATCH 0/7] Wolfson MFD updates Mark Brown
2010-11-24 18:01 ` [PATCH 2.6.37 1/7] mfd: Supply IRQ base for WM832x devices Mark Brown
2010-11-24 18:01 ` [PATCH 2/7] mfd: Simplify WM832x subdevice instantiation Mark Brown
2010-11-24 18:01 ` [PATCH 3/7] mfd: Add WM8326 support Mark Brown
2010-11-24 18:01 ` [PATCH 4/7] mfd: Convert WM831x to new irq_ interrupt methods Mark Brown
2010-11-24 18:01 ` Mark Brown [this message]
2010-11-24 18:01 ` [PATCH 6/7] mfd: Convert WM8994 " Mark Brown
2010-11-24 18:01 ` [PATCH 7/7] mfd: Add initial WM8958 support Mark Brown
2010-11-26 14:05 ` [PATCH 0/7] Wolfson MFD updates Samuel Ortiz
2010-11-26 14:07   ` Mark Brown
2010-11-26 14:51     ` Samuel Ortiz
2010-11-26 15:18       ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1290621705-6926-5-git-send-email-broonie@opensource.wolfsonmicro.com \
    --to=broonie@opensource.wolfsonmicro.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=patches@opensource.wolfsonmicro.com \
    --cc=sameo@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.