From: Nethra <nethra_gmit@yahoo.co.in>
To: linuxppc-embedded@ozlabs.org
Subject: Re: jffs2 file system on MPC8272ADS
Date: Wed, 26 Sep 2007 21:52:49 -0700 (PDT) [thread overview]
Message-ID: <12914822.post@talk.nabble.com> (raw)
In-Reply-To: <20070925152301.GC15739@ld0162-tx32.am.freescale.net>
> Header CRC failed on REF_PRISTINE node at 0x0063b24c: Read 0xffffffff,
> calculated 0x44660075
> Node totlen on flash (0xffffffff) != totlen from node ref (0x000002b4)
> Header CRC failed on REF_PRISTINE node at 0x0063b500: Read 0xffffffff,
> calculated 0x44660075
> Node totlen on flash (0xffffffff) != totlen from node ref (0x000002c8)
> Header CRC failed on REF_PRISTINE node at 0x0063b7c8: Read 0xffffffff,
> calculated 0x44660075
>
> are they debug messages or warnings...?
>>They are errors.
which are all the most possible reasons for these errors ?
> # CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
> # CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
> CONFIG_MTD_MAP_BANK_WIDTH_4=y
> # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
> # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
> # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
> # CONFIG_MTD_CFI_I1 is not set
> CONFIG_MTD_CFI_I2=y
> # CONFIG_MTD_CFI_I4 is not set
> # CONFIG_MTD_CFI_I8 is not set
[snip]
> #
> # Mapping drivers for chip access
> #
> # CONFIG_MTD_COMPLEX_MAPPINGS is not set
> CONFIG_MTD_PHYSMAP=y
> CONFIG_MTD_PHYSMAP_START=0xFC000000
> CONFIG_MTD_PHYSMAP_LEN=0x4000000CONFIG_MTD_PHYSMAP_BANKWIDTH=4
> # CONFIG_MTD_MULTI_PHYSMAP is not set
> # CONFIG_MTD_SBC8240 is not set
> CONFIG_MTD_PQ2FADS=y
> # CONFIG_MTD_PLATRAM is not set
>>Are you using a non-standard flash SIMM? The one that comes with the
>>board (that I've seen, at least) have interleave 4, and are mapped at
>>0xfe000000.
First of all this is CUSTOM board similar to MPC8272ADS.
We are using flash which is different from flash that comes with the
MPC8272ADS board.
FLASH: S29GL256N90TF
Total size is 64 MB with 2 flash interleave
mapped at 0xfc000000.
>>Was it the physmap driver or the pq2fads driver that found the flash?
Flash is cfi compatible.
>>Which kernel are you using, and are you using arch/ppc or arch/powerpc?
>> -Scott
KERNEL: linux-2.6.10 and we r using arc/ppc
Nethra
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
--
View this message in context: http://www.nabble.com/jffs2-file-system-on-MPC8272ADS-tf4513571.html#a12914822
Sent from the linuxppc-embedded mailing list archive at Nabble.com.
next prev parent reply other threads:[~2007-09-27 4:52 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-09-25 6:01 jffs2 file system on MPC8272ADS Nethra
2007-09-25 15:23 ` Scott Wood
2007-09-27 4:52 ` Nethra [this message]
2007-09-27 16:19 ` Scott Wood
2007-10-03 4:45 ` Nethra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=12914822.post@talk.nabble.com \
--to=nethra_gmit@yahoo.co.in \
--cc=linuxppc-embedded@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.