From: Florian Westphal <fw@strlen.de>
To: netfilter-devel@vger.kernel.org
Cc: Florian Westphal <fw@strlen.de>
Subject: [PATCH v2] netfilter: ebt_ip6: allow matching on ipv6-icmp types/codes
Date: Mon, 20 Dec 2010 15:57:47 +0100 [thread overview]
Message-ID: <1292857067-1595-1-git-send-email-fw@strlen.de> (raw)
To avoid adding a new match revision icmp type/code are stored
in the sport/dport area.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Holger Eitzenberger <holger@eitzenberger.org>
---
Changes since v1:
- use u16 where appropriate
- use proper () in if condition
- renamed _ports to _pkthdr
- add comment that sizeof(_pktheader) is also ok in ICMP6 case.
include/linux/netfilter_bridge/ebt_ip6.h | 15 ++++++++--
net/bridge/netfilter/ebt_ip6.c | 46 ++++++++++++++++++++++--------
2 files changed, 46 insertions(+), 15 deletions(-)
diff --git a/include/linux/netfilter_bridge/ebt_ip6.h b/include/linux/netfilter_bridge/ebt_ip6.h
index e5de987..22af18a 100644
--- a/include/linux/netfilter_bridge/ebt_ip6.h
+++ b/include/linux/netfilter_bridge/ebt_ip6.h
@@ -18,8 +18,11 @@
#define EBT_IP6_PROTO 0x08
#define EBT_IP6_SPORT 0x10
#define EBT_IP6_DPORT 0x20
+#define EBT_IP6_ICMP6 0x40
+
#define EBT_IP6_MASK (EBT_IP6_SOURCE | EBT_IP6_DEST | EBT_IP6_TCLASS |\
- EBT_IP6_PROTO | EBT_IP6_SPORT | EBT_IP6_DPORT)
+ EBT_IP6_PROTO | EBT_IP6_SPORT | EBT_IP6_DPORT | \
+ EBT_IP6_ICMP6)
#define EBT_IP6_MATCH "ip6"
/* the same values are used for the invflags */
@@ -32,8 +35,14 @@ struct ebt_ip6_info {
uint8_t protocol;
uint8_t bitmask;
uint8_t invflags;
- uint16_t sport[2];
- uint16_t dport[2];
+ union {
+ uint16_t sport[2];
+ uint8_t icmpv6_type[2];
+ };
+ union {
+ uint16_t dport[2];
+ uint8_t icmpv6_code[2];
+ };
};
#endif
diff --git a/net/bridge/netfilter/ebt_ip6.c b/net/bridge/netfilter/ebt_ip6.c
index 50a46af..2ed0056 100644
--- a/net/bridge/netfilter/ebt_ip6.c
+++ b/net/bridge/netfilter/ebt_ip6.c
@@ -22,9 +22,15 @@
#include <linux/netfilter_bridge/ebtables.h>
#include <linux/netfilter_bridge/ebt_ip6.h>
-struct tcpudphdr {
- __be16 src;
- __be16 dst;
+union pkthdr {
+ struct {
+ __be16 src;
+ __be16 dst;
+ } tcpudphdr;
+ struct {
+ u8 type;
+ u8 code;
+ } icmphdr;
};
static bool
@@ -33,8 +39,8 @@ ebt_ip6_mt(const struct sk_buff *skb, struct xt_action_param *par)
const struct ebt_ip6_info *info = par->matchinfo;
const struct ipv6hdr *ih6;
struct ipv6hdr _ip6h;
- const struct tcpudphdr *pptr;
- struct tcpudphdr _ports;
+ const union pkthdr *pptr;
+ union pkthdr _pkthdr;
ih6 = skb_header_pointer(skb, 0, sizeof(_ip6h), &_ip6h);
if (ih6 == NULL)
@@ -56,26 +62,34 @@ ebt_ip6_mt(const struct sk_buff *skb, struct xt_action_param *par)
return false;
if (FWINV(info->protocol != nexthdr, EBT_IP6_PROTO))
return false;
- if (!(info->bitmask & EBT_IP6_DPORT) &&
- !(info->bitmask & EBT_IP6_SPORT))
+ if (!(info->bitmask & ( EBT_IP6_DPORT |
+ EBT_IP6_SPORT | EBT_IP6_ICMP6)))
return true;
- pptr = skb_header_pointer(skb, offset_ph, sizeof(_ports),
- &_ports);
+
+ /* min icmpv6 headersize is 4, so sizeof(_pkthdr) is ok. */
+ pptr = skb_header_pointer(skb, offset_ph, sizeof(_pkthdr),
+ &_pkthdr);
if (pptr == NULL)
return false;
if (info->bitmask & EBT_IP6_DPORT) {
- u32 dst = ntohs(pptr->dst);
+ u16 dst = ntohs(pptr->tcpudphdr.dst);
if (FWINV(dst < info->dport[0] ||
dst > info->dport[1], EBT_IP6_DPORT))
return false;
}
if (info->bitmask & EBT_IP6_SPORT) {
- u32 src = ntohs(pptr->src);
+ u16 src = ntohs(pptr->tcpudphdr.src);
if (FWINV(src < info->sport[0] ||
src > info->sport[1], EBT_IP6_SPORT))
return false;
}
- return true;
+ if ((info->bitmask & EBT_IP6_ICMP6) &&
+ FWINV(pptr->icmphdr.type < info->icmpv6_type[0] ||
+ pptr->icmphdr.type > info->icmpv6_type[1] ||
+ pptr->icmphdr.code < info->icmpv6_code[0] ||
+ pptr->icmphdr.code > info->icmpv6_code[1],
+ EBT_IP6_ICMP6))
+ return false;
}
return true;
}
@@ -103,6 +117,14 @@ static int ebt_ip6_mt_check(const struct xt_mtchk_param *par)
return -EINVAL;
if (info->bitmask & EBT_IP6_SPORT && info->sport[0] > info->sport[1])
return -EINVAL;
+ if (info->bitmask & EBT_IP6_ICMP6) {
+ if ((info->invflags & EBT_IP6_PROTO) ||
+ info->protocol != IPPROTO_ICMPV6)
+ return -EINVAL;
+ if (info->icmpv6_type[0] > info->icmpv6_type[1] ||
+ info->icmpv6_code[0] > info->icmpv6_code[1])
+ return -EINVAL;
+ }
return 0;
}
--
1.7.2.2
next reply other threads:[~2010-12-20 15:02 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-20 14:57 Florian Westphal [this message]
2010-12-20 18:17 ` [PATCH v2] netfilter: ebt_ip6: allow matching on ipv6-icmp types/codes Bart De Schuymer
2011-01-12 21:15 ` Pablo Neira Ayuso
2011-01-18 20:10 ` Bart De Schuymer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1292857067-1595-1-git-send-email-fw@strlen.de \
--to=fw@strlen.de \
--cc=netfilter-devel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.