From: Tejun Heo <tj@kernel.org>
To: linux-scsi@vger.kernel.org, James.Bottomley@suse.de,
fujita.tomonori@lab.ntt.co.jp, linux-kernel@vger.kernel.org,
Eric.Moore@lsi.com, dgilbert@interlog.com
Cc: Tejun Heo <tj@kernel.org>
Subject: [PATCH 6/6] scsi: don't use execute_in_process_context()
Date: Tue, 21 Dec 2010 16:02:01 +0100 [thread overview]
Message-ID: <1292943721-4519-7-git-send-email-tj@kernel.org> (raw)
In-Reply-To: <1292943721-4519-1-git-send-email-tj@kernel.org>
SCSI is the only subsystem which uses execute_in_process_context() and
its use is racy against module unload. ie. the reap work is not
properly flushed and could still be running after the scsi module is
unloaded.
Although execute_in_process_context() can be more efficient when the
caller already has a context, in this case, the call sites are quite
cold and the difference is practically meaningless. With commit
c8efcc25 (workqueue: allow chained queueing during destruction), the
race condition can easily be fixed by using a dedicated workqueue and
destroying it on module unload.
Create and use scsi_wq instead of execute_in_process_context().
* scsi_device->ew is replaced with release_work. scsi_target->ew is
replaced with reap_work.
* Both works are initialized with the respective release/reap function
during device/target init. scsi_target_reap_usercontext() is moved
upwards to avoid needing forward declaration.
* scsi_alloc_target() now explicitly flushes the reap_work of the
found dying target before putting it instead of depending on
flush_scheduled_work().
For more info on the issues, please read the following thread.
http://thread.gmane.org/gmane.linux.scsi/62923
Signed-off-by: Tejun Heo <tj@kernel.org>
---
drivers/scsi/scsi.c | 15 +++++++++++++--
drivers/scsi/scsi_scan.c | 26 +++++++++++++-------------
drivers/scsi/scsi_sysfs.c | 8 +++++---
include/scsi/scsi_device.h | 6 ++++--
4 files changed, 35 insertions(+), 20 deletions(-)
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index 2aeb2e9..12ebcbc 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -70,6 +70,11 @@
#define CREATE_TRACE_POINTS
#include <trace/events/scsi.h>
+/*
+ * Utility multithreaded workqueue for SCSI.
+ */
+struct workqueue_struct *scsi_wq;
+
static void scsi_done(struct scsi_cmnd *cmd);
/*
@@ -1306,11 +1311,14 @@ MODULE_PARM_DESC(scsi_logging_level, "a bit mask of logging levels");
static int __init init_scsi(void)
{
- int error;
+ int error = -ENOMEM;
+ scsi_wq = alloc_workqueue("scsi", 0, 0);
+ if (!scsi_wq)
+ return error;
error = scsi_init_queue();
if (error)
- return error;
+ goto cleanup_wq;
error = scsi_init_procfs();
if (error)
goto cleanup_queue;
@@ -1342,6 +1350,8 @@ cleanup_procfs:
scsi_exit_procfs();
cleanup_queue:
scsi_exit_queue();
+cleanup_wq:
+ destroy_workqueue(scsi_wq);
printk(KERN_ERR "SCSI subsystem failed to initialize, error = %d\n",
-error);
return error;
@@ -1356,6 +1366,7 @@ static void __exit exit_scsi(void)
scsi_exit_devinfo();
scsi_exit_procfs();
scsi_exit_queue();
+ destroy_workqueue(scsi_wq);
}
subsys_initcall(init_scsi);
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 087821f..4222b58 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -362,6 +362,16 @@ int scsi_is_target_device(const struct device *dev)
}
EXPORT_SYMBOL(scsi_is_target_device);
+static void scsi_target_reap_usercontext(struct work_struct *work)
+{
+ struct scsi_target *starget =
+ container_of(work, struct scsi_target, reap_work);
+
+ transport_remove_device(&starget->dev);
+ device_del(&starget->dev);
+ scsi_target_destroy(starget);
+}
+
static struct scsi_target *__scsi_find_target(struct device *parent,
int channel, uint id)
{
@@ -427,6 +437,7 @@ static struct scsi_target *scsi_alloc_target(struct device *parent,
starget->state = STARGET_CREATED;
starget->scsi_level = SCSI_2;
starget->max_target_blocked = SCSI_DEFAULT_TARGET_BLOCKED;
+ INIT_WORK(&starget->reap_work, scsi_target_reap_usercontext);
retry:
spin_lock_irqsave(shost->host_lock, flags);
@@ -462,21 +473,11 @@ static struct scsi_target *scsi_alloc_target(struct device *parent,
}
/* Unfortunately, we found a dying target; need to
* wait until it's dead before we can get a new one */
+ flush_work(&found_target->reap_work);
put_device(&found_target->dev);
- flush_scheduled_work();
goto retry;
}
-static void scsi_target_reap_usercontext(struct work_struct *work)
-{
- struct scsi_target *starget =
- container_of(work, struct scsi_target, ew.work);
-
- transport_remove_device(&starget->dev);
- device_del(&starget->dev);
- scsi_target_destroy(starget);
-}
-
/**
* scsi_target_reap - check to see if target is in use and destroy if not
* @starget: target to be checked
@@ -507,8 +508,7 @@ void scsi_target_reap(struct scsi_target *starget)
if (state == STARGET_CREATED)
scsi_target_destroy(starget);
else
- execute_in_process_context(scsi_target_reap_usercontext,
- &starget->ew);
+ queue_work(scsi_wq, &starget->reap_work);
}
/**
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 76ee2e7..b0cae21 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -300,7 +300,7 @@ static void scsi_device_dev_release_usercontext(struct work_struct *work)
struct list_head *this, *tmp;
unsigned long flags;
- sdev = container_of(work, struct scsi_device, ew.work);
+ sdev = container_of(work, struct scsi_device, release_work);
parent = sdev->sdev_gendev.parent;
starget = to_scsi_target(parent);
@@ -343,8 +343,8 @@ static void scsi_device_dev_release_usercontext(struct work_struct *work)
static void scsi_device_dev_release(struct device *dev)
{
struct scsi_device *sdp = to_scsi_device(dev);
- execute_in_process_context(scsi_device_dev_release_usercontext,
- &sdp->ew);
+
+ queue_work(scsi_wq, &sdp->release_work);
}
static struct class sdev_class = {
@@ -1069,6 +1069,8 @@ void scsi_sysfs_device_initialize(struct scsi_device *sdev)
dev_set_name(&sdev->sdev_dev, "%d:%d:%d:%d",
sdev->host->host_no, sdev->channel, sdev->id, sdev->lun);
sdev->scsi_level = starget->scsi_level;
+ INIT_WORK(&sdev->release_work, scsi_device_dev_release_usercontext);
+
transport_setup_device(&sdev->sdev_gendev);
spin_lock_irqsave(shost->host_lock, flags);
list_add_tail(&sdev->same_target_siblings, &starget->devices);
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index 85867dc..64de831 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -168,7 +168,7 @@ struct scsi_device {
struct device sdev_gendev,
sdev_dev;
- struct execute_work ew; /* used to get process context on put */
+ struct work_struct release_work; /* for process context on put */
struct scsi_dh_data *scsi_dh_data;
enum scsi_device_state sdev_state;
@@ -258,7 +258,7 @@ struct scsi_target {
#define SCSI_DEFAULT_TARGET_BLOCKED 3
char scsi_level;
- struct execute_work ew;
+ struct work_struct reap_work;
enum scsi_target_state state;
void *hostdata; /* available to low-level driver */
unsigned long starget_data[0]; /* for the transport */
@@ -276,6 +276,8 @@ static inline struct scsi_target *scsi_target(struct scsi_device *sdev)
#define starget_printk(prefix, starget, fmt, a...) \
dev_printk(prefix, &(starget)->dev, fmt, ##a)
+extern struct workqueue_struct *scsi_wq;
+
extern struct scsi_device *__scsi_add_device(struct Scsi_Host *,
uint, uint, uint, void *hostdata);
extern int scsi_add_device(struct Scsi_Host *host, uint channel,
--
1.7.1
prev parent reply other threads:[~2010-12-21 15:02 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-21 15:01 [PATCHSET] scsi: don't use flush_scheduled_work() Tejun Heo
2010-12-21 15:01 ` [PATCH 1/6] scsi: remove flush_scheduled_work() usages Tejun Heo
2010-12-21 15:01 ` [PATCH 2/6] scsi: pm8001: simplify workqueue usage Tejun Heo
2010-12-21 15:01 ` [PATCH 3/6] fcoe: use dedicated workqueue instead of system_wq Tejun Heo
2010-12-21 15:01 ` [PATCH 4/6] fusion: don't use flush_scheduled_work() Tejun Heo
2011-01-10 7:30 ` Desai, Kashyap
2011-01-10 7:30 ` Desai, Kashyap
2011-01-11 15:13 ` Tejun Heo
2010-12-21 15:02 ` [PATCH 5/6] scsi: remove bogus use of struct execute_work in sg Tejun Heo
2010-12-21 15:02 ` Tejun Heo [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1292943721-4519-7-git-send-email-tj@kernel.org \
--to=tj@kernel.org \
--cc=Eric.Moore@lsi.com \
--cc=James.Bottomley@suse.de \
--cc=dgilbert@interlog.com \
--cc=fujita.tomonori@lab.ntt.co.jp \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.