From: Michael Schwingen <michael@schwingen.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 10/13] update/fix some more IXP42x boards (only compile tested)
Date: Tue, 28 Dec 2010 13:43:28 +0100 [thread overview]
Message-ID: <1293540211-3684-11-git-send-email-michael@schwingen.org> (raw)
In-Reply-To: <1293540211-3684-1-git-send-email-michael@schwingen.org>
Signed-off-by: Michael Schwingen <michael@schwingen.org>
---
board/ixdp425/config.mk | 3 ++-
board/prodrive/pdnb3/config.mk | 2 +-
boards.cfg | 2 +-
include/configs/ixdp425.h | 13 ++++++++++---
include/configs/ixdpg425.h | 9 ++++++---
include/configs/pdnb3.h | 6 ++++++
6 files changed, 26 insertions(+), 9 deletions(-)
diff --git a/board/ixdp425/config.mk b/board/ixdp425/config.mk
index 509c894..5d6f708 100644
--- a/board/ixdp425/config.mk
+++ b/board/ixdp425/config.mk
@@ -1,2 +1,3 @@
#
-CONFIG_SYS_TEXT_BASE = 0x00f80000
+CONFIG_SYS_TEXT_BASE = 0x50000000
+
diff --git a/board/prodrive/pdnb3/config.mk b/board/prodrive/pdnb3/config.mk
index 817541f..b5e6a4e 100644
--- a/board/prodrive/pdnb3/config.mk
+++ b/board/prodrive/pdnb3/config.mk
@@ -1,2 +1,2 @@
#
-CONFIG_SYS_TEXT_BASE = 0x01f00000
+CONFIG_SYS_TEXT_BASE = 0x50000000
diff --git a/boards.cfg b/boards.cfg
index 695baca..b0fc38a 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -130,7 +130,7 @@ actux2 arm ixp
actux3 arm ixp
actux4 arm ixp
ixdp425 arm ixp
-ixdpg425 arm ixp
+ixdpg425 arm ixp ixdp425
lpd7a400 arm lh7a40x lpd7a40x
lpd7a404 arm lh7a40x lpd7a40x
balloon3 arm pxa
diff --git a/include/configs/ixdp425.h b/include/configs/ixdp425.h
index 28d41e2..81288b7 100644
--- a/include/configs/ixdp425.h
+++ b/include/configs/ixdp425.h
@@ -105,8 +105,10 @@
#define CONFIG_SYS_LOAD_ADDR 0x00010000 /* default load address */
-#define CONFIG_SYS_HZ 3333333 /* spec says 66.666 MHz, but it appears to be 33 */
- /* valid baudrates */
+/* timer clock - 2* OSC_IN system clock */
+#define CONFIG_IXP425_TIMER_CLK 66666666
+#define CONFIG_SYS_HZ 1000
+
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/*
@@ -193,7 +195,12 @@
#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
#define CONFIG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x20000)
+#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x40000)
#define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
+/* additions for new relocation code, must be added to all boards */
+#define CONFIG_SYS_SDRAM_BASE 0
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
+
#endif /* __CONFIG_H */
diff --git a/include/configs/ixdpg425.h b/include/configs/ixdpg425.h
index 637fd7d..60a2371 100644
--- a/include/configs/ixdpg425.h
+++ b/include/configs/ixdpg425.h
@@ -53,9 +53,6 @@
/*
* Misc configuration options
*/
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-#define CONFIG_USE_IRQ 1 /* we need IRQ stuff for timer */
-#define CONFIG_TIMER_IRQ
#define CONFIG_BOOTCOUNT_LIMIT /* support for bootcount limit */
#define CONFIG_SYS_BOOTCOUNT_ADDR 0x60003000 /* inside qmrg sram */
@@ -115,6 +112,7 @@
#define CONFIG_SYS_MEMTEST_END 0x00800000 /* 4 ... 8 MB in DRAM */
#define CONFIG_SYS_LOAD_ADDR 0x00010000 /* default load address */
+#define CONFIG_IXP425_TIMER_CLK 66666666
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
/* valid baudrates */
@@ -248,4 +246,9 @@
*/
#define CONFIG_SYS_CACHELINE_SIZE 32
+/* additions for new relocation code, must be added to all boards */
+#define CONFIG_SYS_SDRAM_BASE 0
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
+
#endif /* __CONFIG_H */
diff --git a/include/configs/pdnb3.h b/include/configs/pdnb3.h
index 33fa6ee..9acb018 100644
--- a/include/configs/pdnb3.h
+++ b/include/configs/pdnb3.h
@@ -117,6 +117,7 @@
#define CONFIG_SYS_MEMTEST_END 0x00800000 /* 4 ... 8 MB in DRAM */
#define CONFIG_SYS_LOAD_ADDR 0x00010000 /* default load address */
+#define CONFIG_IXP425_TIMER_CLK 66666666
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
/* valid baudrates */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
@@ -345,4 +346,9 @@
*/
#define CONFIG_SYS_CACHELINE_SIZE 32
+/* additions for new relocation code, must be added to all boards */
+#define CONFIG_SYS_SDRAM_BASE 0x00000000
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
+
#endif /* __CONFIG_H */
--
1.7.2.3
next prev parent reply other threads:[~2010-12-28 12:43 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-28 12:43 [U-Boot] IXP42x patch series Michael Schwingen
2010-12-28 12:43 ` [U-Boot] [PATCH 01/13] add XScale sub architecture (IXP/PXA) to board list Michael Schwingen
2010-12-28 12:43 ` [U-Boot] [PATCH 02/13] add support for IXP42x Rev. B1 and newer Michael Schwingen
2010-12-28 12:43 ` [U-Boot] [PATCH 03/13] trigger hardware watchdog in IXP42x serial driver Michael Schwingen
2010-12-28 12:43 ` [U-Boot] [PATCH 04/13] Fix IXP code to work after relocation was added: - jump to real flash location after reset before turning off flash mirror - fix timer system to use HZ == 1000, remove broken interrupt-based code Michael Schwingen
2010-12-29 4:48 ` Mike Frysinger
2010-12-28 12:43 ` [U-Boot] [PATCH 05/13] fix "depend" target in npe directory Michael Schwingen
2010-12-28 12:43 ` [U-Boot] [PATCH 06/13] update/fix AcTux1 board Michael Schwingen
2010-12-28 12:43 ` [U-Boot] [PATCH 07/13] update/fix AcTux2 board Michael Schwingen
2010-12-28 12:43 ` [U-Boot] [PATCH 08/13] update/fix AcTux3 board Michael Schwingen
2010-12-28 12:43 ` [U-Boot] [PATCH 09/13] update/fix AcTux4 board Michael Schwingen
2010-12-28 12:43 ` Michael Schwingen [this message]
2010-12-28 12:43 ` [U-Boot] [PATCH 11/13] add dvlhost (dLAN 200 AV Wireless G) board Michael Schwingen
2010-12-28 12:43 ` [U-Boot] [PATCH 12/13] add support for function-sections Michael Schwingen
2010-12-29 4:47 ` Mike Frysinger
2010-12-29 8:28 ` Michael Schwingen
2010-12-29 8:35 ` Mike Frysinger
2010-12-28 12:43 ` [U-Boot] [PATCH 13/13] add support for fixed-speed MII ports (no standard PHY registers) Michael Schwingen
2010-12-29 4:48 ` Mike Frysinger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1293540211-3684-11-git-send-email-michael@schwingen.org \
--to=michael@schwingen.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.