All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alex Elder <aelder@sgi.com>
To: Dave Chinner <david@fromorbit.com>
Cc: xfs@oss.sgi.com
Subject: Re: [PATCH 4/8] xfs: introduce xfs_rw_lock() helpers for locking the inode
Date: Tue, 04 Jan 2011 19:54:41 -0600	[thread overview]
Message-ID: <1294192481.2485.721.camel@doink> (raw)
In-Reply-To: <1294116518-14908-5-git-send-email-david@fromorbit.com>

On Tue, 2011-01-04 at 15:48 +1100, Dave Chinner wrote:
> From: Dave Chinner <dchinner@redhat.com>
> 
> We need to obtain the i_mutex, i_iolock and i_ilock during the read
> and write paths. Add a set of wrapper functions to neatly
> encapsulate the lock ordering and shared/exclusive semantics to make
> the locking easier to follow and get right.
> 
> Signed-off-by: Dave Chinner <dchinner@redhat.com>

I like this change, but I think you missed a lock call.
I also notice there are some locking differences, and
I don't really question them but I wonder if you can
offer a little more explanation.

> ---
>  fs/xfs/linux-2.6/xfs_file.c |  123 ++++++++++++++++++++++++-------------------
>  1 files changed, 68 insertions(+), 55 deletions(-)
> 
> diff --git a/fs/xfs/linux-2.6/xfs_file.c b/fs/xfs/linux-2.6/xfs_file.c
> index 33a688c..0d6111e 100644
> --- a/fs/xfs/linux-2.6/xfs_file.c
> +++ b/fs/xfs/linux-2.6/xfs_file.c

. . .

> @@ -262,22 +296,21 @@ xfs_file_aio_read(
>  	if (XFS_FORCED_SHUTDOWN(mp))
>  		return -EIO;
>  
> -	if (unlikely(ioflags & IO_ISDIRECT))
> -		mutex_lock(&inode->i_mutex);
> -	xfs_ilock(ip, XFS_IOLOCK_SHARED);
> -
>  	if (unlikely(ioflags & IO_ISDIRECT)) {
> +		xfs_rw_ilock(ip, XFS_IOLOCK_EXCL);
> +

Previously only XFS_IOLOCK_SHARED was used here.
I understand that using the IOLOCK_EXCL now gets
the desired mutex_lock() call.  Is the previous
code in error here though?  Can you anticipate
any different behavior because of this lock change?
Does this specific change justify separating it
into a small patch just before this one?

>  		if (inode->i_mapping->nrpages) {
>  			ret = -xfs_flushinval_pages(ip,
>  					(iocb->ki_pos & PAGE_CACHE_MASK),
>  					-1, FI_REMAPF_LOCKED);
> +			if (ret) {
> +				xfs_rw_iunlock(ip, XFS_IOLOCK_EXCL);
> +				return ret;
> +			}
>  		}
> -		mutex_unlock(&inode->i_mutex);
> -		if (ret) {
> -			xfs_iunlock(ip, XFS_IOLOCK_SHARED);
> -			return ret;
> -		}
> -	}
> +		xfs_rw_ilock_demote(ip, XFS_IOLOCK_EXCL);
> +	} else
> +		xfs_rw_ilock(ip, XFS_IOLOCK_SHARED);
>  
>  	trace_xfs_file_read(ip, size, iocb->ki_pos, ioflags);
>  

. . .

> @@ -386,14 +419,13 @@ xfs_file_splice_write(
>  	if (XFS_FORCED_SHUTDOWN(ip->i_mount))
>  		return -EIO;
>  
> -	xfs_ilock(ip, XFS_IOLOCK_EXCL);
> +	xfs_rw_ilock(ip, XFS_ILOCK_EXCL|XFS_IOLOCK_EXCL);

Similar sentiments here.  We will now be acquiring i_mutex
here where previously we did not.  Is that OK?

>  	new_size = *ppos + count;
>  
> -	xfs_ilock(ip, XFS_ILOCK_EXCL);
>  	if (new_size > ip->i_size)
>  		ip->i_new_size = new_size;
> -	xfs_iunlock(ip, XFS_ILOCK_EXCL);
> +	xfs_rw_iunlock(ip, XFS_ILOCK_EXCL);
>  
>  	trace_xfs_file_splice_write(ip, count, *ppos, ioflags);
>  

. . .

> @@ -631,21 +662,16 @@ xfs_file_aio_write(
>  relock:
>  	if (ioflags & IO_ISDIRECT) {
>  		iolock = XFS_IOLOCK_SHARED;
> -		need_i_mutex = 0;
>  	} else {
>  		iolock = XFS_IOLOCK_EXCL;
> -		need_i_mutex = 1;
> -		mutex_lock(&inode->i_mutex);
>  	}
>  
> -	xfs_ilock(ip, XFS_ILOCK_EXCL|iolock);
> -

Maybe I'm missing something, but I think you want to
insert this here:
	xfs_rw_ilock(ip, XFS_ILOCK_EXCL|iolock);
...because (for starters) if generic_write_checks()
returns an error below you're going to be calling
the unlock routine.

>  start:
>  	ret = generic_write_checks(file, &pos, &count,
>  					S_ISBLK(inode->i_mode));
>  	if (ret) {
> -		xfs_iunlock(ip, XFS_ILOCK_EXCL|iolock);
> -		goto out_unlock_mutex;
> +		xfs_rw_iunlock(ip, XFS_ILOCK_EXCL|iolock);
> +		return ret;
>  	}
>  
>  	if (ioflags & IO_ISDIRECT) {
> @@ -654,16 +680,14 @@ start:
>  				mp->m_rtdev_targp : mp->m_ddev_targp;
>  
>  		if ((pos & target->bt_smask) || (count & target->bt_smask)) {
> -			xfs_iunlock(ip, XFS_ILOCK_EXCL|iolock);
> +			xfs_rw_iunlock(ip, XFS_ILOCK_EXCL|iolock);
>  			return XFS_ERROR(-EINVAL);
>  		}
>  

One can get a little lost in this code.  I don't know if
this comment is exactly right, but something like it might
be helpful (while you're in here).

		/*
		 * For direct I/O, if there are cached pages or
		 * we're extending the file, we need IOLOCK_EXCL
		 * until we're sure the bytes at the new EOF have
		 * been zeroed and/or the cached pages are flushed
		 * out.  Upgrade the I/O lock and start again.
		 */

> -		if (!need_i_mutex && (mapping->nrpages || pos > ip->i_size)) {
> -			xfs_iunlock(ip, XFS_ILOCK_EXCL|iolock);
> +		if (iolock != XFS_IOLOCK_EXCL &&
> +		    (mapping->nrpages || pos > ip->i_size)) {
> +			xfs_rw_iunlock(ip, XFS_ILOCK_EXCL|iolock);
>  			iolock = XFS_IOLOCK_EXCL;
> -			need_i_mutex = 1;
> -			mutex_lock(&inode->i_mutex);
> -			xfs_ilock(ip, XFS_ILOCK_EXCL|iolock);
>  			goto start;
>  		}
>  	}

. . .




_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs

  reply	other threads:[~2011-01-05  1:52 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-01-04  4:48 [PATCH 0/8] xfs: prevent corruption due to overlapping AIO DIO V2 Dave Chinner
2011-01-04  4:48 ` [PATCH 1/8] xfs: ensure sync write errors are returned Dave Chinner
2011-01-05  1:53   ` Alex Elder
2011-01-07  8:45   ` Christoph Hellwig
2011-01-07  9:07     ` Dave Chinner
2011-01-04  4:48 ` [PATCH 2/8] xfs: factor common post-write isize handling code Dave Chinner
2011-01-05  1:54   ` Alex Elder
2011-01-04  4:48 ` [PATCH 4/8] xfs: introduce xfs_rw_lock() helpers for locking the inode Dave Chinner
2011-01-05  1:54   ` Alex Elder [this message]
2011-01-05  7:55     ` Dave Chinner
2011-01-04  4:48 ` [PATCH 5/8] xfs: split direct IO write path from xfs_file_aio_write Dave Chinner
2011-01-05  1:54   ` Alex Elder
2011-01-05  7:36     ` Dave Chinner
2011-01-07  8:58   ` Christoph Hellwig
2011-01-07  9:21     ` Dave Chinner
2011-01-04  4:48 ` [PATCH 6/8] xfs: split buffered " Dave Chinner
2011-01-05  1:55   ` Alex Elder
2011-01-04  4:48 ` [PATCH 7/8] xfs: factor common write setup code Dave Chinner
2011-01-05  1:55   ` Alex Elder
2011-01-07  8:53   ` Christoph Hellwig
2011-01-07  9:20     ` Dave Chinner
2011-01-04  4:48 ` [PATCH 8/8] xfs: serialise unaligned direct IOs Dave Chinner
2011-01-05  1:55   ` Alex Elder
2011-01-05  1:53 ` [PATCH 0/8] xfs: prevent corruption due to overlapping AIO DIO V2 Alex Elder
  -- strict thread matches above, loose matches on Subject: below --
2011-01-07 11:30 [PATCH 0/8] xfs: prevent corruption due to overlapping AIO DIO V3 Dave Chinner
2011-01-07 11:30 ` [PATCH 4/8] xfs: introduce xfs_rw_lock() helpers for locking the inode Dave Chinner
2011-01-10 19:23   ` Christoph Hellwig
2011-01-10 22:26     ` Dave Chinner
2011-01-10 23:37 [PATCH 0/8] xfs: prevent corruption due to overlapping AIO DIO V4 Dave Chinner
2011-01-10 23:37 ` [PATCH 4/8] xfs: introduce xfs_rw_lock() helpers for locking the inode Dave Chinner
2011-01-11 17:36   ` Christoph Hellwig
2011-01-11 21:02     ` Dave Chinner
2011-01-11 21:03       ` Christoph Hellwig
2011-01-11 21:36       ` Alex Elder

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1294192481.2485.721.camel@doink \
    --to=aelder@sgi.com \
    --cc=david@fromorbit.com \
    --cc=xfs@oss.sgi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.