From: Kumar Gala <galak@kernel.crashing.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 1/2] powerpc/85xx: Add Support for Freescale P1010 Processor
Date: Fri, 14 Jan 2011 10:41:10 -0600 [thread overview]
Message-ID: <1295023271-11897-1-git-send-email-galak@kernel.crashing.org> (raw)
From: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Key Features include of the P1010:
* e500v2 core frequency operation of 500 to 800 MHz
* Power consumption less than 5.0 W at 800 MHz core speed
* Dual SATA 3 Gbps controllers with integrated PHY
* Dual PCI Express controllers
* Three 10/100/1000 Mbps enhanced triple-speed Ethernet controllers (eTSECs)
* TCP/IP acceleration and classification capabilities
* IEEE 1588 support
* Lossless flow control
* RGMII, SGMII
* DDR3 with support for a 32-bit data interface (40 bits including ECC),
up to 800 MHz data rate 32/16-bit DDR3 memory controller
* Dedicated security engine featuring trusted boot
* TDM interface
* Dual controller area networks (FlexCAN) controller
* SD/MMC card controller supporting booting from Flash cards
* USB 2.0 host and device controller with an on-chip, high-speed PHY
* Integrated Flash controller (IFC)
* Power Management Controller (PMC)
* Four-channel, general-purpose DMA controller
* I2C controller
* Serial peripheral interface (SPI) controller with master and slave support
* System timers including a periodic interrupt timer, real-time clock,
software watchdog timer, and four general-purpose timers
* Dual DUARTs
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Dipen Dudhat <dipen.dudhat@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/cpu/mpc85xx/Makefile | 1 +
arch/powerpc/cpu/mpc8xxx/cpu.c | 2 ++
arch/powerpc/include/asm/config.h | 6 ++++--
arch/powerpc/include/asm/processor.h | 2 ++
drivers/misc/fsl_law.c | 1 +
5 files changed, 10 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile
index af7bc09..e1261cf 100644
--- a/arch/powerpc/cpu/mpc85xx/Makefile
+++ b/arch/powerpc/cpu/mpc85xx/Makefile
@@ -50,6 +50,7 @@ COBJS-$(CONFIG_MPC8544) += ddr-gen2.o
COBJS-$(CONFIG_MPC8572) += ddr-gen3.o
COBJS-$(CONFIG_MPC8536) += ddr-gen3.o
COBJS-$(CONFIG_MPC8569) += ddr-gen3.o
+COBJS-$(CONFIG_P1010) += ddr-gen3.o
COBJS-$(CONFIG_P1011) += ddr-gen3.o
COBJS-$(CONFIG_P1012) += ddr-gen3.o
COBJS-$(CONFIG_P1013) += ddr-gen3.o
diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c
index 5b30fbd..ac720a5 100644
--- a/arch/powerpc/cpu/mpc8xxx/cpu.c
+++ b/arch/powerpc/cpu/mpc8xxx/cpu.c
@@ -64,6 +64,8 @@ struct cpu_type cpu_type_list [] = {
CPU_TYPE_ENTRY(8569, 8569_E, 1),
CPU_TYPE_ENTRY(8572, 8572, 2),
CPU_TYPE_ENTRY(8572, 8572_E, 2),
+ CPU_TYPE_ENTRY(P1010, P1010, 1),
+ CPU_TYPE_ENTRY(P1010, P1010_E, 1),
CPU_TYPE_ENTRY(P1011, P1011, 1),
CPU_TYPE_ENTRY(P1011, P1011_E, 1),
CPU_TYPE_ENTRY(P1012, P1012, 1),
diff --git a/arch/powerpc/include/asm/config.h b/arch/powerpc/include/asm/config.h
index 76dedeb..d80fc97 100644
--- a/arch/powerpc/include/asm/config.h
+++ b/arch/powerpc/include/asm/config.h
@@ -69,14 +69,16 @@
/* Enable TSEC2.0 for the platforms that have it if we are using TSEC */
#if defined(CONFIG_TSEC_ENET) && \
- (defined(CONFIG_P1020) || defined(CONFIG_P1011))
+ (defined(CONFIG_P1010) || \
+ defined(CONFIG_P1020) || defined(CONFIG_P1011))
#define CONFIG_TSECV2
#endif
/*
* SEC (crypto unit) major compatible version determination
*/
-#if defined(CONFIG_FSL_CORENET)
+#if defined(CONFIG_FSL_CORENET) || \
+ defined(CONFIG_P1010)
#define CONFIG_SYS_FSL_SEC_COMPAT 4
#elif defined(CONFIG_MPC85xx) || defined(CONFIG_MPC83xx)
#define CONFIG_SYS_FSL_SEC_COMPAT 2
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 71fafa3..6b43dc5 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -1038,6 +1038,8 @@
#define SVR_8569_E 0x808800
#define SVR_8572 0x80E000
#define SVR_8572_E 0x80E800
+#define SVR_P1010 0x80F100
+#define SVR_P1010_E 0x80F900
#define SVR_P1011 0x80E500
#define SVR_P1011_E 0x80ED00
#define SVR_P1012 0x80E501
diff --git a/drivers/misc/fsl_law.c b/drivers/misc/fsl_law.c
index 6589076..931cc71 100644
--- a/drivers/misc/fsl_law.c
+++ b/drivers/misc/fsl_law.c
@@ -38,6 +38,7 @@ DECLARE_GLOBAL_DATA_PTR;
defined(CONFIG_MPC8641) || defined(CONFIG_MPC8610)
#define FSL_HW_NUM_LAWS 10
#elif defined(CONFIG_MPC8536) || defined(CONFIG_MPC8572) || \
+ defined(CONFIG_P1010) || \
defined(CONFIG_P1011) || defined(CONFIG_P1020) || \
defined(CONFIG_P1012) || defined(CONFIG_P1021) || \
defined(CONFIG_P1013) || defined(CONFIG_P1022) || \
--
1.7.2.3
next reply other threads:[~2011-01-14 16:41 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-14 16:41 Kumar Gala [this message]
2011-01-14 16:41 ` [U-Boot] [PATCH 2/2] powerpc/85xx: Add Support for Freescale P1014 Processor Kumar Gala
2011-01-18 4:17 ` Kumar Gala
2011-01-19 8:10 ` Wolfgang Denk
2011-01-19 9:10 ` Kumar Gala
2011-01-18 4:17 ` [U-Boot] [PATCH 1/2] powerpc/85xx: Add Support for Freescale P1010 Processor Kumar Gala
2011-01-19 8:09 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1295023271-11897-1-git-send-email-galak@kernel.crashing.org \
--to=galak@kernel.crashing.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.