From: Tom Warren <twarren.nvidia@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 0/4 V2] Add basic NVIDIA Tegra2 SoC support
Date: Fri, 14 Jan 2011 10:11:33 -0700 [thread overview]
Message-ID: <1295025097-25680-1-git-send-email-twarren@nvidia.com> (raw)
This series of patches adds preliminary/baseline support for NVIDIA's
Tegra2 SoC. Basic CPU (AVP), RAM and UART init are covered so that the
system (Harmony or Seaboard) can boot to the U-Boot serial cmd prompt.
Further support (for Cortex-A9 CPU(s), USB, SD/MMC, etc.) to follow.
V2: Make changes based on feedback from Peter Tyser and Sandeep Paulraj.
Tom Warren (4):
arm: Tegra2: Add basic NVIDIA Tegra2 SoC support
serial: Add Tegra2 serial port support
arm: Tegra2: Add support for NVIDIA Harmony board
arm: Tegra2: Add support for NVIDIA Seaboard board
MAINTAINERS | 5 +
arch/arm/cpu/armv7/tegra2/Makefile | 48 ++++++
arch/arm/cpu/armv7/tegra2/board.c | 91 ++++++++++
arch/arm/cpu/armv7/tegra2/config.mk | 28 +++
arch/arm/cpu/armv7/tegra2/lowlevel_init.S | 66 +++++++
arch/arm/cpu/armv7/tegra2/sys_info.c | 35 ++++
arch/arm/cpu/armv7/tegra2/timer.c | 122 +++++++++++++
arch/arm/include/asm/arch-tegra2/clk_rst.h | 155 +++++++++++++++++
arch/arm/include/asm/arch-tegra2/pinmux.h | 52 ++++++
arch/arm/include/asm/arch-tegra2/pmc.h | 125 ++++++++++++++
arch/arm/include/asm/arch-tegra2/sys_proto.h | 33 ++++
arch/arm/include/asm/arch-tegra2/tegra2.h | 49 ++++++
arch/arm/include/asm/arch-tegra2/uart.h | 45 +++++
board/nvidia/common/board.c | 234 ++++++++++++++++++++++++++
board/nvidia/common/board.h | 57 +++++++
board/nvidia/harmony/Makefile | 50 ++++++
board/nvidia/seaboard/Makefile | 50 ++++++
boards.cfg | 2 +
common/serial.c | 3 +-
include/configs/harmony.h | 48 ++++++
include/configs/seaboard.h | 43 +++++
include/configs/tegra2-common.h | 160 ++++++++++++++++++
include/serial.h | 3 +-
23 files changed, 1502 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/cpu/armv7/tegra2/Makefile
create mode 100644 arch/arm/cpu/armv7/tegra2/board.c
create mode 100644 arch/arm/cpu/armv7/tegra2/config.mk
create mode 100644 arch/arm/cpu/armv7/tegra2/lowlevel_init.S
create mode 100644 arch/arm/cpu/armv7/tegra2/sys_info.c
create mode 100644 arch/arm/cpu/armv7/tegra2/timer.c
create mode 100644 arch/arm/include/asm/arch-tegra2/clk_rst.h
create mode 100644 arch/arm/include/asm/arch-tegra2/pinmux.h
create mode 100644 arch/arm/include/asm/arch-tegra2/pmc.h
create mode 100644 arch/arm/include/asm/arch-tegra2/sys_proto.h
create mode 100644 arch/arm/include/asm/arch-tegra2/tegra2.h
create mode 100644 arch/arm/include/asm/arch-tegra2/uart.h
create mode 100644 board/nvidia/common/board.c
create mode 100644 board/nvidia/common/board.h
create mode 100644 board/nvidia/harmony/Makefile
create mode 100644 board/nvidia/seaboard/Makefile
create mode 100644 include/configs/harmony.h
create mode 100644 include/configs/seaboard.h
create mode 100644 include/configs/tegra2-common.h
--
1.7.3.5
next reply other threads:[~2011-01-14 17:11 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-14 17:11 Tom Warren [this message]
2011-01-14 17:11 ` [U-Boot] [PATCH 1/4 V2] arm: Tegra2: Add basic NVIDIA Tegra2 SoC support Tom Warren
2011-01-14 17:11 ` [U-Boot] [PATCH 2/4 V2] serial: Add Tegra2 serial port support Tom Warren
2011-01-14 17:11 ` [U-Boot] [PATCH 3/4 V2] arm: Tegra2: Add support for NVIDIA Harmony board Tom Warren
2011-01-14 17:11 ` [U-Boot] [PATCH 4/4 V2] arm: Tegra2: Add support for NVIDIA Seaboard board Tom Warren
2011-01-14 19:59 ` [U-Boot] [PATCH 0/4 V2] Add basic NVIDIA Tegra2 SoC support Peter Tyser
2011-01-14 20:41 ` Tom Warren
2011-01-14 21:36 ` Peter Tyser
2011-01-14 22:39 ` Tom Warren
2011-01-14 23:00 ` Albert ARIBAUD
2011-01-14 23:23 ` Peter Tyser
2011-01-15 0:01 ` Wolfgang Denk
2011-01-17 23:27 ` Wolfgang Denk
2011-01-17 23:27 ` Wolfgang Denk
2011-01-19 21:23 ` Tom Warren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1295025097-25680-1-git-send-email-twarren@nvidia.com \
--to=twarren.nvidia@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.