From: Pieter Maes <maescool@gmail.com>
To: Greg Kroah-Hartman <gregkh@suse.de>
Cc: linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] USB: serial: Updated support for ICOM devices
Date: Tue, 18 Jan 2011 00:26:16 +0100 [thread overview]
Message-ID: <1295306776.16281.5.camel@pietmacubuntu> (raw)
I found the original patch on the db0fhn repeater wiki (couldn't find the email
of the origial author) I guess it was never commited.
I updated and added some Icom HAM-radio devices to the ftdi driver.
Added extra comments to make clear what devices it are.
Signed-off-by: Pieter Maes <maescool@gmail.com>
---
drivers/usb/serial/ftdi_sio.c | 12 +++++++++++-
drivers/usb/serial/ftdi_sio_ids.h | 22 +++++++++++++++++-----
2 files changed, 28 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index a2668d0..4787c0c 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -676,7 +676,17 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_PCDJ_DAC2_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_RRCIRKITS_LOCOBUFFER_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ASK_RDR400_PID) },
- { USB_DEVICE(ICOM_ID1_VID, ICOM_ID1_PID) },
+ { USB_DEVICE(ICOM_VID, ICOM_ID_1_PID) },
+ { USB_DEVICE(ICOM_VID, ICOM_OPC_U_UC_PID) },
+ { USB_DEVICE(ICOM_VID, ICOM_ID_RP2C1_PID) },
+ { USB_DEVICE(ICOM_VID, ICOM_ID_RP2C2_PID) },
+ { USB_DEVICE(ICOM_VID, ICOM_ID_RP2D_PID) },
+ { USB_DEVICE(ICOM_VID, ICOM_ID_RP2VT_PID) },
+ { USB_DEVICE(ICOM_VID, ICOM_ID_RP2VR_PID) },
+ { USB_DEVICE(ICOM_VID, ICOM_ID_RP4KVT_PID) },
+ { USB_DEVICE(ICOM_VID, ICOM_ID_RP4KVR_PID) },
+ { USB_DEVICE(ICOM_VID, ICOM_ID_RP2KVT_PID) },
+ { USB_DEVICE(ICOM_VID, ICOM_ID_RP2KVR_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ACG_HFDUAL_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_YEI_SERVOCENTER31_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_THORLABS_PID) },
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index bf08672..4e0eec3 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -569,11 +569,23 @@
#define OCT_US101_PID 0x0421 /* OCT US101 USB to RS-232 */
/*
- * Icom ID-1 digital transceiver
- */
-
-#define ICOM_ID1_VID 0x0C26
-#define ICOM_ID1_PID 0x0004
+ * Definitions for Icom Inc. devices
+ */
+#define ICOM_VID 0x0C26 /* Icom vendor ID */
+/* Note: ID-1 is a communications tranceiver for HAM-radio operators */
+#define ICOM_ID_1_PID 0x0004 /* ID-1 USB to RS-232 */
+/* Note: OPC is an Optional cable to connect an Icom Tranceiver */
+#define ICOM_OPC_U_UC_PID 0x0018 /* OPC-478UC, OPC-1122U cloning cable */
+/* Note: ID-RP* devices are Icom Repeater Devices for HAM-radio */
+#define ICOM_ID_RP2C1_PID 0x0009 /* ID-RP2C Asset 1 to RS-232 */
+#define ICOM_ID_RP2C2_PID 0x000A /* ID-RP2C Asset 2 to RS-232 */
+#define ICOM_ID_RP2D_PID 0x000B /* ID-RP2D configuration port*/
+#define ICOM_ID_RP2VT_PID 0x000C /* ID-RP2V Transmit config port */
+#define ICOM_ID_RP2VR_PID 0x000D /* ID-RP2V Receive config port */
+#define ICOM_ID_RP4KVT_PID 0x0010 /* ID-RP4000V Transmit config port */
+#define ICOM_ID_RP4KVR_PID 0x0011 /* ID-RP4000V Receive config port */
+#define ICOM_ID_RP2KVT_PID 0x0012 /* ID-RP2000V Transmit config port */
+#define ICOM_ID_RP2KVR_PID 0x0013 /* ID-RP2000V Receive config port */
/*
* GN Otometrics (http://www.otometrics.com)
--
1.7.1
reply other threads:[~2011-01-17 23:26 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1295306776.16281.5.camel@pietmacubuntu \
--to=maescool@gmail.com \
--cc=gregkh@suse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.