From: James Smart <james.smart@emulex.com>
To: linux-scsi@vger.kernel.org
Subject: [PATCH 4/6] lpfc 8.3.21: Initialization and user interface changes
Date: Wed, 16 Feb 2011 12:39:57 -0500 [thread overview]
Message-ID: <1297877997.1492.27.camel@wookie> (raw)
- Make link speed not supported by port message an error message.
- Add support for new SLI failure codes add sysfs parameter to reflect the
security setting and current state.
- Add all lpfc module parameters to the /sys/modules/lpfc/parameters directory.
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
---
lpfc.h | 2 -
lpfc_attr.c | 75 ++++++++++++++++++++++++++++++++++++++-------------------
lpfc_debugfs.c | 8 +++---
lpfc_hw.h | 5 +++
lpfc_init.c | 2 -
lpfc_mbox.c | 3 +-
lpfc_scsi.c | 14 +++++++---
7 files changed, 72 insertions(+), 37 deletions(-)
diff -upNr a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
--- a/drivers/scsi/lpfc/lpfc_attr.c 2011-02-16 11:32:37.000000000 -0500
+++ b/drivers/scsi/lpfc/lpfc_attr.c 2011-02-16 11:35:01.000000000 -0500
@@ -678,6 +678,7 @@ lpfc_do_offline(struct lpfc_hba *phba, u
*
* Notes:
* Assumes any error from lpfc_do_offline() will be negative.
+ * Do not make this function static.
*
* Returns:
* lpfc_do_offline() return code if not zero
@@ -1293,6 +1294,28 @@ lpfc_fips_rev_show(struct device *dev,
}
/**
+ * lpfc_dss_show - Return the current state of dss and the configured state
+ * @dev: class converted to a Scsi_host structure.
+ * @attr: device attribute, not used.
+ * @buf: on return contains the formatted text.
+ *
+ * Returns: size of formatted string.
+ **/
+static ssize_t
+lpfc_dss_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+ struct lpfc_hba *phba = vport->phba;
+
+ return snprintf(buf, PAGE_SIZE, "%s - %sOperational\n",
+ (phba->cfg_enable_dss) ? "Enabled" : "Disabled",
+ (phba->sli3_options & LPFC_SLI3_DSS_ENABLED) ?
+ "" : "Not ");
+}
+
+/**
* lpfc_param_show - Return a cfg attribute value in decimal
*
* Description:
@@ -1611,13 +1634,13 @@ lpfc_##attr##_store(struct device *dev,
#define LPFC_ATTR(name, defval, minval, maxval, desc) \
static uint lpfc_##name = defval;\
-module_param(lpfc_##name, uint, 0);\
+module_param(lpfc_##name, uint, S_IRUGO);\
MODULE_PARM_DESC(lpfc_##name, desc);\
lpfc_param_init(name, defval, minval, maxval)
#define LPFC_ATTR_R(name, defval, minval, maxval, desc) \
static uint lpfc_##name = defval;\
-module_param(lpfc_##name, uint, 0);\
+module_param(lpfc_##name, uint, S_IRUGO);\
MODULE_PARM_DESC(lpfc_##name, desc);\
lpfc_param_show(name)\
lpfc_param_init(name, defval, minval, maxval)\
@@ -1625,7 +1648,7 @@ static DEVICE_ATTR(lpfc_##name, S_IRUGO
#define LPFC_ATTR_RW(name, defval, minval, maxval, desc) \
static uint lpfc_##name = defval;\
-module_param(lpfc_##name, uint, 0);\
+module_param(lpfc_##name, uint, S_IRUGO);\
MODULE_PARM_DESC(lpfc_##name, desc);\
lpfc_param_show(name)\
lpfc_param_init(name, defval, minval, maxval)\
@@ -1636,7 +1659,7 @@ static DEVICE_ATTR(lpfc_##name, S_IRUGO
#define LPFC_ATTR_HEX_R(name, defval, minval, maxval, desc) \
static uint lpfc_##name = defval;\
-module_param(lpfc_##name, uint, 0);\
+module_param(lpfc_##name, uint, S_IRUGO);\
MODULE_PARM_DESC(lpfc_##name, desc);\
lpfc_param_hex_show(name)\
lpfc_param_init(name, defval, minval, maxval)\
@@ -1644,7 +1667,7 @@ static DEVICE_ATTR(lpfc_##name, S_IRUGO
#define LPFC_ATTR_HEX_RW(name, defval, minval, maxval, desc) \
static uint lpfc_##name = defval;\
-module_param(lpfc_##name, uint, 0);\
+module_param(lpfc_##name, uint, S_IRUGO);\
MODULE_PARM_DESC(lpfc_##name, desc);\
lpfc_param_hex_show(name)\
lpfc_param_init(name, defval, minval, maxval)\
@@ -1655,13 +1678,13 @@ static DEVICE_ATTR(lpfc_##name, S_IRUGO
#define LPFC_VPORT_ATTR(name, defval, minval, maxval, desc) \
static uint lpfc_##name = defval;\
-module_param(lpfc_##name, uint, 0);\
+module_param(lpfc_##name, uint, S_IRUGO);\
MODULE_PARM_DESC(lpfc_##name, desc);\
lpfc_vport_param_init(name, defval, minval, maxval)
#define LPFC_VPORT_ATTR_R(name, defval, minval, maxval, desc) \
static uint lpfc_##name = defval;\
-module_param(lpfc_##name, uint, 0);\
+module_param(lpfc_##name, uint, S_IRUGO);\
MODULE_PARM_DESC(lpfc_##name, desc);\
lpfc_vport_param_show(name)\
lpfc_vport_param_init(name, defval, minval, maxval)\
@@ -1669,7 +1692,7 @@ static DEVICE_ATTR(lpfc_##name, S_IRUGO
#define LPFC_VPORT_ATTR_RW(name, defval, minval, maxval, desc) \
static uint lpfc_##name = defval;\
-module_param(lpfc_##name, uint, 0);\
+module_param(lpfc_##name, uint, S_IRUGO);\
MODULE_PARM_DESC(lpfc_##name, desc);\
lpfc_vport_param_show(name)\
lpfc_vport_param_init(name, defval, minval, maxval)\
@@ -1680,7 +1703,7 @@ static DEVICE_ATTR(lpfc_##name, S_IRUGO
#define LPFC_VPORT_ATTR_HEX_R(name, defval, minval, maxval, desc) \
static uint lpfc_##name = defval;\
-module_param(lpfc_##name, uint, 0);\
+module_param(lpfc_##name, uint, S_IRUGO);\
MODULE_PARM_DESC(lpfc_##name, desc);\
lpfc_vport_param_hex_show(name)\
lpfc_vport_param_init(name, defval, minval, maxval)\
@@ -1688,7 +1711,7 @@ static DEVICE_ATTR(lpfc_##name, S_IRUGO
#define LPFC_VPORT_ATTR_HEX_RW(name, defval, minval, maxval, desc) \
static uint lpfc_##name = defval;\
-module_param(lpfc_##name, uint, 0);\
+module_param(lpfc_##name, uint, S_IRUGO);\
MODULE_PARM_DESC(lpfc_##name, desc);\
lpfc_vport_param_hex_show(name)\
lpfc_vport_param_init(name, defval, minval, maxval)\
@@ -1732,7 +1755,7 @@ static DEVICE_ATTR(npiv_info, S_IRUGO, l
static DEVICE_ATTR(lpfc_temp_sensor, S_IRUGO, lpfc_temp_sensor_show, NULL);
static DEVICE_ATTR(lpfc_fips_level, S_IRUGO, lpfc_fips_level_show, NULL);
static DEVICE_ATTR(lpfc_fips_rev, S_IRUGO, lpfc_fips_rev_show, NULL);
-
+static DEVICE_ATTR(lpfc_dss, S_IRUGO, lpfc_dss_show, NULL);
static char *lpfc_soft_wwn_key = "C99G71SL8032A";
@@ -1973,7 +1996,7 @@ static DEVICE_ATTR(lpfc_soft_wwnn, S_IRU
static int lpfc_poll = 0;
-module_param(lpfc_poll, int, 0);
+module_param(lpfc_poll, int, S_IRUGO);
MODULE_PARM_DESC(lpfc_poll, "FCP ring polling mode control:"
" 0 - none,"
" 1 - poll with interrupts enabled"
@@ -1983,21 +2006,21 @@ static DEVICE_ATTR(lpfc_poll, S_IRUGO |
lpfc_poll_show, lpfc_poll_store);
int lpfc_sli_mode = 0;
-module_param(lpfc_sli_mode, int, 0);
+module_param(lpfc_sli_mode, int, S_IRUGO);
MODULE_PARM_DESC(lpfc_sli_mode, "SLI mode selector:"
" 0 - auto (SLI-3 if supported),"
" 2 - select SLI-2 even on SLI-3 capable HBAs,"
" 3 - select SLI-3");
int lpfc_enable_npiv = 1;
-module_param(lpfc_enable_npiv, int, 0);
+module_param(lpfc_enable_npiv, int, S_IRUGO);
MODULE_PARM_DESC(lpfc_enable_npiv, "Enable NPIV functionality");
lpfc_param_show(enable_npiv);
lpfc_param_init(enable_npiv, 1, 0, 1);
static DEVICE_ATTR(lpfc_enable_npiv, S_IRUGO, lpfc_enable_npiv_show, NULL);
int lpfc_enable_rrq;
-module_param(lpfc_enable_rrq, int, 0);
+module_param(lpfc_enable_rrq, int, S_IRUGO);
MODULE_PARM_DESC(lpfc_enable_rrq, "Enable RRQ functionality");
lpfc_param_show(enable_rrq);
lpfc_param_init(enable_rrq, 0, 0, 1);
@@ -2059,7 +2082,7 @@ static DEVICE_ATTR(txcmplq_hw, S_IRUGO,
lpfc_txcmplq_hw_show, NULL);
int lpfc_iocb_cnt = 2;
-module_param(lpfc_iocb_cnt, int, 1);
+module_param(lpfc_iocb_cnt, int, S_IRUGO);
MODULE_PARM_DESC(lpfc_iocb_cnt,
"Number of IOCBs alloc for ELS, CT, and ABTS: 1k to 5k IOCBs");
lpfc_param_show(iocb_cnt);
@@ -2211,7 +2234,7 @@ static DEVICE_ATTR(lpfc_nodev_tmo, S_IRU
# disappear until the timer expires. Value range is [0,255]. Default
# value is 30.
*/
-module_param(lpfc_devloss_tmo, int, 0);
+module_param(lpfc_devloss_tmo, int, S_IRUGO);
MODULE_PARM_DESC(lpfc_devloss_tmo,
"Seconds driver will hold I/O waiting "
"for a device to come back");
@@ -2321,7 +2344,7 @@ LPFC_VPORT_ATTR_R(peer_port_login, 0, 0,
# Default value of this parameter is 1.
*/
static int lpfc_restrict_login = 1;
-module_param(lpfc_restrict_login, int, 0);
+module_param(lpfc_restrict_login, int, S_IRUGO);
MODULE_PARM_DESC(lpfc_restrict_login,
"Restrict virtual ports login to remote initiators.");
lpfc_vport_param_show(restrict_login);
@@ -2492,7 +2515,7 @@ lpfc_topology_store(struct device *dev,
return -EINVAL;
}
static int lpfc_topology = 0;
-module_param(lpfc_topology, int, 0);
+module_param(lpfc_topology, int, S_IRUGO);
MODULE_PARM_DESC(lpfc_topology, "Select Fibre Channel topology");
lpfc_param_show(topology)
lpfc_param_init(topology, 0, 0, 6)
@@ -2934,7 +2957,7 @@ lpfc_link_speed_store(struct device *dev
}
static int lpfc_link_speed = 0;
-module_param(lpfc_link_speed, int, 0);
+module_param(lpfc_link_speed, int, S_IRUGO);
MODULE_PARM_DESC(lpfc_link_speed, "Select link speed");
lpfc_param_show(link_speed)
@@ -3062,7 +3085,7 @@ lpfc_aer_support_store(struct device *de
}
static int lpfc_aer_support = 1;
-module_param(lpfc_aer_support, int, 1);
+module_param(lpfc_aer_support, int, S_IRUGO);
MODULE_PARM_DESC(lpfc_aer_support, "Enable PCIe device AER support");
lpfc_param_show(aer_support)
@@ -3174,7 +3197,7 @@ LPFC_VPORT_ATTR_RW(use_adisc, 0, 0, 1,
# The value is set in milliseconds.
*/
static int lpfc_max_scsicmpl_time;
-module_param(lpfc_max_scsicmpl_time, int, 0);
+module_param(lpfc_max_scsicmpl_time, int, S_IRUGO);
MODULE_PARM_DESC(lpfc_max_scsicmpl_time,
"Use command completion time to control queue depth");
lpfc_vport_param_show(max_scsicmpl_time);
@@ -3350,7 +3373,7 @@ LPFC_ATTR_R(enable_bg, 0, 0, 1, "Enable
*/
unsigned int lpfc_prot_mask = SHOST_DIF_TYPE1_PROTECTION;
-module_param(lpfc_prot_mask, uint, 0);
+module_param(lpfc_prot_mask, uint, S_IRUGO);
MODULE_PARM_DESC(lpfc_prot_mask, "host protection mask");
/*
@@ -3362,7 +3385,7 @@ MODULE_PARM_DESC(lpfc_prot_mask, "host p
#
*/
unsigned char lpfc_prot_guard = SHOST_DIX_GUARD_IP;
-module_param(lpfc_prot_guard, byte, 0);
+module_param(lpfc_prot_guard, byte, S_IRUGO);
MODULE_PARM_DESC(lpfc_prot_guard, "host protection guard type");
/*
@@ -3380,7 +3403,7 @@ MODULE_PARM_DESC(lpfc_prot_guard, "host
* Default value is 0.
*/
int lpfc_delay_discovery;
-module_param(lpfc_delay_discovery, int, 0);
+module_param(lpfc_delay_discovery, int, S_IRUGO);
MODULE_PARM_DESC(lpfc_delay_discovery,
"Delay NPort discovery when Clean Address bit is cleared. "
"Allowed values: 0,1.");
@@ -3475,6 +3498,7 @@ struct device_attribute *lpfc_hba_attrs[
&dev_attr_txcmplq_hw,
&dev_attr_lpfc_fips_level,
&dev_attr_lpfc_fips_rev,
+ &dev_attr_lpfc_dss,
NULL,
};
@@ -4677,6 +4701,7 @@ lpfc_get_cfgparam(struct lpfc_hba *phba)
lpfc_aer_support_init(phba, lpfc_aer_support);
lpfc_suppress_link_up_init(phba, lpfc_suppress_link_up);
lpfc_iocb_cnt_init(phba, lpfc_iocb_cnt);
+ phba->cfg_enable_dss = 1;
return;
}
diff -upNr a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c
--- a/drivers/scsi/lpfc/lpfc_debugfs.c 2010-08-04 10:31:45.000000000 -0400
+++ b/drivers/scsi/lpfc/lpfc_debugfs.c 2011-02-16 11:33:35.000000000 -0500
@@ -82,23 +82,23 @@
* the HBA. X MUST also be a power of 2.
*/
static int lpfc_debugfs_enable = 1;
-module_param(lpfc_debugfs_enable, int, 0);
+module_param(lpfc_debugfs_enable, int, S_IRUGO);
MODULE_PARM_DESC(lpfc_debugfs_enable, "Enable debugfs services");
/* This MUST be a power of 2 */
static int lpfc_debugfs_max_disc_trc;
-module_param(lpfc_debugfs_max_disc_trc, int, 0);
+module_param(lpfc_debugfs_max_disc_trc, int, S_IRUGO);
MODULE_PARM_DESC(lpfc_debugfs_max_disc_trc,
"Set debugfs discovery trace depth");
/* This MUST be a power of 2 */
static int lpfc_debugfs_max_slow_ring_trc;
-module_param(lpfc_debugfs_max_slow_ring_trc, int, 0);
+module_param(lpfc_debugfs_max_slow_ring_trc, int, S_IRUGO0);
MODULE_PARM_DESC(lpfc_debugfs_max_slow_ring_trc,
"Set debugfs slow ring trace depth");
static int lpfc_debugfs_mask_disc_trc;
-module_param(lpfc_debugfs_mask_disc_trc, int, 0);
+module_param(lpfc_debugfs_mask_disc_trc, int, S_IRUGO);
MODULE_PARM_DESC(lpfc_debugfs_mask_disc_trc,
"Set debugfs discovery trace mask");
diff -upNr a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
--- a/drivers/scsi/lpfc/lpfc.h 2011-02-16 11:32:37.000000000 -0500
+++ b/drivers/scsi/lpfc/lpfc.h 2011-02-16 11:33:35.000000000 -0500
@@ -662,7 +662,7 @@ struct lpfc_hba {
#define LPFC_INITIALIZE_LINK 0 /* do normal init_link mbox */
#define LPFC_DELAY_INIT_LINK 1 /* layered driver hold off */
#define LPFC_DELAY_INIT_LINK_INDEFINITELY 2 /* wait, manual intervention */
-
+ uint32_t cfg_enable_dss;
lpfc_vpd_t vpd; /* vital product data */
struct pci_dev *pcidev;
diff -upNr a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
--- a/drivers/scsi/lpfc/lpfc_hw.h 2011-02-16 11:32:37.000000000 -0500
+++ b/drivers/scsi/lpfc/lpfc_hw.h 2011-02-16 11:33:35.000000000 -0500
@@ -3204,7 +3204,10 @@ typedef struct {
#define IOERR_SLER_RRQ_RJT_ERR 0x4C
#define IOERR_SLER_RRQ_RETRY_ERR 0x4D
#define IOERR_SLER_ABTS_ERR 0x4E
-
+#define IOERR_ELXSEC_KEY_UNWRAP_ERROR 0xF0
+#define IOERR_ELXSEC_KEY_UNWRAP_COMPARE_ERROR 0xF1
+#define IOERR_ELXSEC_CRYPTO_ERROR 0xF2
+#define IOERR_ELXSEC_CRYPTO_COMPARE_ERROR 0xF3
#define IOERR_DRVR_MASK 0x100
#define IOERR_SLI_DOWN 0x101 /* ulpStatus - Driver defined */
#define IOERR_SLI_BRESET 0x102
diff -upNr a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
--- a/drivers/scsi/lpfc/lpfc_init.c 2011-02-16 11:32:37.000000000 -0500
+++ b/drivers/scsi/lpfc/lpfc_init.c 2011-02-16 11:33:35.000000000 -0500
@@ -460,7 +460,7 @@ lpfc_config_port_post(struct lpfc_hba *p
|| ((phba->cfg_link_speed == LPFC_USER_LINK_SPEED_16G)
&& !(phba->lmt & LMT_16Gb))) {
/* Reset link speed to auto */
- lpfc_printf_log(phba, KERN_WARNING, LOG_LINK_EVENT,
+ lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT,
"1302 Invalid speed for this board: "
"Reset link speed to auto: x%x\n",
phba->cfg_link_speed);
diff -upNr a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
--- a/drivers/scsi/lpfc/lpfc_mbox.c 2011-02-16 11:23:37.000000000 -0500
+++ b/drivers/scsi/lpfc/lpfc_mbox.c 2011-02-16 11:33:35.000000000 -0500
@@ -1263,7 +1263,8 @@ lpfc_config_port(struct lpfc_hba *phba,
if (phba->sli_rev == LPFC_SLI_REV3 && phba->vpd.sli3Feat.cerbm) {
if (phba->cfg_enable_bg)
mb->un.varCfgPort.cbg = 1; /* configure BlockGuard */
- mb->un.varCfgPort.cdss = 1; /* Configure Security */
+ if (phba->cfg_enable_dss)
+ mb->un.varCfgPort.cdss = 1; /* Configure Security */
mb->un.varCfgPort.cerbm = 1; /* Request HBQs */
mb->un.varCfgPort.ccrp = 1; /* Command Ring Polling */
mb->un.varCfgPort.max_hbq = lpfc_sli_hbq_count();
diff -upNr a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
--- a/drivers/scsi/lpfc/lpfc_scsi.c 2011-02-16 11:25:15.000000000 -0500
+++ b/drivers/scsi/lpfc/lpfc_scsi.c 2011-02-16 11:33:35.000000000 -0500
@@ -2508,6 +2508,15 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba
break;
case IOSTAT_LOCAL_REJECT:
case IOSTAT_REMOTE_STOP:
+ if (lpfc_cmd->result == IOERR_ELXSEC_KEY_UNWRAP_ERROR ||
+ lpfc_cmd->result ==
+ IOERR_ELXSEC_KEY_UNWRAP_COMPARE_ERROR ||
+ lpfc_cmd->result == IOERR_ELXSEC_CRYPTO_ERROR ||
+ lpfc_cmd->result ==
+ IOERR_ELXSEC_CRYPTO_COMPARE_ERROR) {
+ cmd->result = ScsiResult(DID_NO_CONNECT, 0);
+ break;
+ }
if (lpfc_cmd->result == IOERR_INVALID_RPI ||
lpfc_cmd->result == IOERR_NO_RESOURCES ||
lpfc_cmd->result == IOERR_ABORT_REQUESTED ||
@@ -2515,7 +2524,6 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba
cmd->result = ScsiResult(DID_REQUEUE, 0);
break;
}
-
if ((lpfc_cmd->result == IOERR_RX_DMA_FAILED ||
lpfc_cmd->result == IOERR_TX_DMA_FAILED) &&
pIocbOut->iocb.unsli3.sli3_bg.bgstat) {
@@ -2545,7 +2553,6 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba
lpfc_cmd->cur_iocbq.sli4_xritag,
0, 0);
}
-
/* else: fall through */
default:
cmd->result = ScsiResult(DID_ERROR, 0);
@@ -2556,9 +2563,8 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba
|| (pnode->nlp_state != NLP_STE_MAPPED_NODE))
cmd->result = ScsiResult(DID_TRANSPORT_DISRUPTED,
SAM_STAT_BUSY);
- } else {
+ } else
cmd->result = ScsiResult(DID_OK, 0);
- }
if (cmd->result || lpfc_cmd->fcp_rsp->rspSnsLen) {
uint32_t *lp = (uint32_t *)cmd->sense_buffer;
next reply other threads:[~2011-02-16 17:40 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-16 17:39 James Smart [this message]
2011-02-18 20:59 ` [PATCH 4/6] lpfc 8.3.21: Initialization and user interface changes James Bottomley
2011-02-18 22:29 ` James Smart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1297877997.1492.27.camel@wookie \
--to=james.smart@emulex.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.