From: Alexey Fisher <bug-track@fisher-privat.net>
To: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [regression] drm/i915: cleanup per-pipe reg usage
Date: Thu, 17 Feb 2011 08:26:20 +0100 [thread overview]
Message-ID: <1297927580.3349.2.camel@mini> (raw)
In-Reply-To: <20110216105745.034a4b29@jbarnes-desktop>
[-- Attachment #1: Type: text/plain, Size: 1117 bytes --]
Am Mittwoch, den 16.02.2011, 10:57 -0800 schrieb Jesse Barnes:
> On Sat, 12 Feb 2011 22:02:36 +0100
> Alexey Fisher <bug-track@fisher-privat.net> wrote:
>
> > In attachment are reg_dumps.
> >
> > intel_1 - is gdm login screen, every thing is ok
> > intel_2 - is after login, noise
> > intel_3 - is after mouse pointer was placed to the upper left corner,
> > image is ok again.
> >
> > Am Samstag, den 12.02.2011, 18:09 +0000 schrieb Chris Wilson:
> > >
> > > On Sat, 12 Feb 2011 15:16:16 +0100, Alexey Fisher
> > > <bug-track@fisher-privat.net> wrote:
> > > > Video is in attachment.
> > > >
> > > > If mouse pointer is on the left top corner i get still image .. if
> > > not -
> > > > noise.
> > >
> > > I think intel_reg_dumper before/after will be the best guide as to
> > > where
> > > the mistake crept in.
> > > -Chris
>
> Also, seeing the kernel messages from a clean boot after setting
> drm.debug=4 would help; they'll tell us what FIFO watermarks we used
> and might help me track down the flicker.
the bad files are from version 2.6.38-rc2-00090-g9db4a9c
the good are 2.6.38-rc2-00079-g4a1dc3f
[-- Attachment #2: dmesg_bad --]
[-- Type: text/plain, Size: 73413 bytes --]
[ 0.000000] Linux version 2.6.38-rc2-00090-g9db4a9c (lex@zwerg) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #181 SMP Fri Feb 11 16:32:21 CET 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f7a0000 (usable)
[ 0.000000] BIOS-e820: 000000007f7a0000 - 000000007f7ae000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007f7ae000 - 000000007f7f0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f7f0000 - 000000007f800000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI present.
[ 0.000000] DMI: 1005HA/1005HA, BIOS 1401 02/26/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7f7a0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 080000000 write-back
[ 0.000000] 1 base 07F800000 mask 0FF800000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 17fb000-1800000
[ 0.000000] RAMDISK: 35be2000 - 36de9000
[ 0.000000] ACPI: RSDP 000fb9e0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 7f7a0000 0003C (v01 A_M_I_ OEMRSDT 02001026 MSFT 00000097)
[ 0.000000] ACPI: FACP 7f7a0200 00084 (v02 A_M_I_ OEMFACP 02001026 MSFT 00000097)
[ 0.000000] ACPI: DSDT 7f7a0430 080A2 (v01 A1311 A1311000 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 7f7ae000 00040
[ 0.000000] ACPI: APIC 7f7a0390 0005C (v01 A_M_I_ OEMAPIC 02001026 MSFT 00000097)
[ 0.000000] ACPI: MCFG 7f7a03f0 0003C (v01 A_M_I_ OEMMCFG 02001026 MSFT 00000097)
[ 0.000000] ACPI: OEMB 7f7ae040 00061 (v01 A_M_I_ AMI_OEM 02001026 MSFT 00000097)
[ 0.000000] ACPI: HPET 7f7a84e0 00038 (v01 A_M_I_ OEMHPET 02001026 MSFT 00000097)
[ 0.000000] ACPI: SSDT 7f7aeb40 004F0 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1151MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007f7a0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007f7a0
[ 0.000000] On node 0 totalpages: 522031
[ 0.000000] free_area_init_node: node 0, pgdat c14e0680, node_mem_map f4bf2200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2304 pages used for memmap
[ 0.000000] HighMem zone: 292514 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000
[ 0.000000] PM: Registered nosave memory: 00000000000e2000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 7f800000 (gap: 7f800000:7f600000)
[ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f7000000 s25856 r0 d23296 u2097152
[ 0.000000] pcpu-alloc: s25856 r0 d23296 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517951
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-rc2-00090-g9db4a9c root=UUID=425014a2-7247-459c-8e13-9595b8fc5507 drm.debug=4 ro crashkernel=384M-2G:64M,2G-:128M quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007f7a0)
[ 0.000000] Memory: 2046460k/2088576k available (3436k kernel code, 41664k reserved, 1598k data, 360k init, 1179272k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff8f000 - 0xfffff000 ( 448 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc14eb000 - 0xc1545000 ( 360 kB)
[ 0.000000] .data : 0xc135b36e - 0xc14eaec0 (1598 kB)
[ 0.000000] .text : 0xc1000000 - 0xc135b36e (3436 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:320
[ 0.000000] CPU 0 irqstacks, hard=f440c000 soft=f440e000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1666.826 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3333.65 BogoMIPS (lpj=6667304)
[ 0.004015] pid_max: default: 32768 minimum: 301
[ 0.004089] Security Framework initialized
[ 0.004108] Smack: Initializing.
[ 0.004115] AppArmor: AppArmor disabled by boot time parameter
[ 0.004142] Mount-cache hash table entries: 512
[ 0.004457] CPU: Physical Processor ID: 0
[ 0.004462] CPU: Processor Core ID: 0
[ 0.004467] mce: CPU supports 5 MCE banks
[ 0.004480] CPU0: Thermal monitoring enabled (TM2)
[ 0.004487] using mwait in idle threads.
[ 0.008015] ACPI: Core revision 20110112
[ 0.020094] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.020494] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.063777] CPU0: Intel(R) Atom(TM) CPU N280 @ 1.66GHz stepping 02
[ 0.064003] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
[ 0.064003] ... version: 3
[ 0.064003] ... bit width: 40
[ 0.064003] ... generic registers: 2
[ 0.064003] ... value mask: 000000ffffffffff
[ 0.064003] ... max period: 000000007fffffff
[ 0.064003] ... fixed-purpose events: 3
[ 0.064003] ... event mask: 0000000700000003
[ 0.064003] CPU 1 irqstacks, hard=f4488000 soft=f448a000
[ 0.064003] Booting Node 0, Processors #1 Ok.
[ 0.008000] Initializing CPU#1
[ 0.152033] Brought up 2 CPUs
[ 0.152041] Total of 2 processors activated (6666.57 BogoMIPS).
[ 0.152308] devtmpfs: initialized
[ 0.152308] NET: Registered protocol family 16
[ 0.152346] ACPI: bus type pci registered
[ 0.152346] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.152346] PCI: not using MMCONFIG
[ 0.152376] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 0.152381] PCI: Using configuration type 1 for base access
[ 0.164377] bio: create slab <bio-0> at 0
[ 0.170580] ACPI: EC: Look up EC in DSDT
[ 0.173970] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.174638] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.176940] ACPI: SSDT 7f7ae180 001FA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.184768] ACPI: Dynamic OEM Table Load:
[ 0.184776] ACPI: SSDT (null) 001FA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.185242] ACPI: SSDT 7f7ae410 00724 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.186037] ACPI: Dynamic OEM Table Load:
[ 0.186044] ACPI: SSDT (null) 00724 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.186705] ACPI: SSDT 7f7ae0b0 000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.187528] ACPI: Dynamic OEM Table Load:
[ 0.187535] ACPI: SSDT (null) 000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.187790] ACPI: SSDT 7f7ae380 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.188603] ACPI: Dynamic OEM Table Load:
[ 0.188610] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.189446] ACPI: Interpreter enabled
[ 0.189458] ACPI: (supports S0 S3 S4 S5)
[ 0.189506] ACPI: Using IOAPIC for interrupt routing
[ 0.189576] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.190975] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
[ 0.190981] PCI: Using MMCONFIG for extended config space
[ 0.212542] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.212542] ACPI: No dock devices found.
[ 0.212542] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.212730] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.212851] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.212851] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.212851] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.212851] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.212851] pci_root PNP0A08:00: host bridge window [mem 0x7f800000-0xffffffff]
[ 0.212851] pci 0000:00:00.0: [8086:27ac] type 0 class 0x000600
[ 0.212851] pci 0000:00:02.0: [8086:27ae] type 0 class 0x000300
[ 0.212851] pci 0000:00:02.0: reg 10: [mem 0xf7e00000-0xf7e7ffff]
[ 0.212851] pci 0000:00:02.0: reg 14: [io 0xdc00-0xdc07]
[ 0.212851] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
[ 0.212851] pci 0000:00:02.0: reg 1c: [mem 0xf7dc0000-0xf7dfffff]
[ 0.212851] pci 0000:00:02.1: [8086:27a6] type 0 class 0x000380
[ 0.212851] pci 0000:00:02.1: reg 10: [mem 0xf7e80000-0xf7efffff]
[ 0.216101] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[ 0.216133] pci 0000:00:1b.0: reg 10: [mem 0xf7db8000-0xf7dbbfff 64bit]
[ 0.216228] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.216237] pci 0000:00:1b.0: PME# disabled
[ 0.216272] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[ 0.216369] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.216378] pci 0000:00:1c.0: PME# disabled
[ 0.216414] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
[ 0.216511] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.216519] pci 0000:00:1c.1: PME# disabled
[ 0.216562] pci 0000:00:1c.3: [8086:27d6] type 1 class 0x000604
[ 0.216659] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.216667] pci 0000:00:1c.3: PME# disabled
[ 0.216706] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[ 0.216772] pci 0000:00:1d.0: reg 20: [io 0xd400-0xd41f]
[ 0.216823] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[ 0.216888] pci 0000:00:1d.1: reg 20: [io 0xd480-0xd49f]
[ 0.216939] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[ 0.217005] pci 0000:00:1d.2: reg 20: [io 0xd800-0xd81f]
[ 0.217056] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[ 0.217122] pci 0000:00:1d.3: reg 20: [io 0xd880-0xd89f]
[ 0.217185] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[ 0.217216] pci 0000:00:1d.7: reg 10: [mem 0xf7db7c00-0xf7db7fff]
[ 0.217317] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.217325] pci 0000:00:1d.7: PME# disabled
[ 0.217356] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.217454] pci 0000:00:1f.0: [8086:27b9] type 0 class 0x000601
[ 0.217563] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.217572] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.217581] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0380 (mask 0003)
[ 0.217589] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007)
[ 0.217597] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0007)
[ 0.217655] pci 0000:00:1f.2: [8086:27c5] type 0 class 0x000106
[ 0.217684] pci 0000:00:1f.2: reg 10: [io 0xd080-0xd087]
[ 0.217701] pci 0000:00:1f.2: reg 14: [io 0xd000-0xd003]
[ 0.217717] pci 0000:00:1f.2: reg 18: [io 0xcc00-0xcc07]
[ 0.217733] pci 0000:00:1f.2: reg 1c: [io 0xc880-0xc883]
[ 0.217749] pci 0000:00:1f.2: reg 20: [io 0xc800-0xc80f]
[ 0.217766] pci 0000:00:1f.2: reg 24: [mem 0xf7db7800-0xf7db7bff]
[ 0.217814] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.217822] pci 0000:00:1f.2: PME# disabled
[ 0.217910] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
[ 0.217919] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.217928] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.217941] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.218037] pci 0000:02:00.0: [168c:002b] type 0 class 0x000280
[ 0.218074] pci 0000:02:00.0: reg 10: [mem 0xfbff0000-0xfbffffff 64bit]
[ 0.218196] pci 0000:02:00.0: supports D1
[ 0.218201] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.218210] pci 0000:02:00.0: PME# disabled
[ 0.224048] pci 0000:00:1c.1: PCI bridge to [bus 02-03]
[ 0.224058] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
[ 0.224068] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.224080] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf6ffffff 64bit pref]
[ 0.224183] pci 0000:01:00.0: [1969:1062] type 0 class 0x000200
[ 0.224220] pci 0000:01:00.0: reg 10: [mem 0xf7fc0000-0xf7ffffff 64bit]
[ 0.224241] pci 0000:01:00.0: reg 18: [io 0xec00-0xec7f]
[ 0.224357] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.224367] pci 0000:01:00.0: PME# disabled
[ 0.232064] pci 0000:00:1c.3: PCI bridge to [bus 01-01]
[ 0.232064] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 0.232067] pci 0000:00:1c.3: bridge window [mem 0xf7f00000-0xf7ffffff]
[ 0.232080] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.232174] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.232184] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.232193] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.232205] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.232213] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.232219] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.232226] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.232233] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.232240] pci 0000:00:1e.0: bridge window [mem 0x7f800000-0xffffffff] (subtractive decode)
[ 0.232274] pci_bus 0000:00: on NUMA node 0
[ 0.232285] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.232590] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.232655] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 0.232793] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.252046] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.252193] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.252335] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.252477] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.252618] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.252762] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.252905] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.253054] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.253142] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.253142] vgaarb: loaded
[ 0.253142] SCSI subsystem initialized
[ 0.253142] libata version 3.00 loaded.
[ 0.253142] usbcore: registered new interface driver usbfs
[ 0.253142] usbcore: registered new interface driver hub
[ 0.253142] usbcore: registered new device driver usb
[ 0.253142] wmi: Mapper loaded
[ 0.253142] PCI: Using ACPI for IRQ routing
[ 0.253142] PCI: pci_cache_line_size set to 64 bytes
[ 0.253142] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.253142] reserve RAM buffer: 000000007f7a0000 - 000000007fffffff
[ 0.256096] NET: Registered protocol family 8
[ 0.256098] NET: Registered protocol family 20
[ 0.256136] NetLabel: Initializing
[ 0.256136] NetLabel: domain hash size = 128
[ 0.256136] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.256136] NetLabel: unlabeled traffic allowed by default
[ 0.256140] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.256140] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.256140] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.260085] Switching to clocksource hpet
[ 0.264495] pnp: PnP ACPI init
[ 0.264545] ACPI: bus type pnp registered
[ 0.264805] pnp 00:00: [bus 00-ff]
[ 0.264812] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.264818] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.264824] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.264830] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.264836] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.264842] pnp 00:00: [mem 0x7f800000-0xffffffff window]
[ 0.265100] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.265134] pnp 00:01: [mem 0xfed13000-0xfed19fff]
[ 0.265308] system 00:01: [mem 0xfed13000-0xfed19fff] has been reserved
[ 0.265316] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.265371] pnp 00:02: [dma 4]
[ 0.265377] pnp 00:02: [io 0x0000-0x000f]
[ 0.265382] pnp 00:02: [io 0x0081-0x0083]
[ 0.265387] pnp 00:02: [io 0x0087]
[ 0.265392] pnp 00:02: [io 0x0089-0x008b]
[ 0.265397] pnp 00:02: [io 0x008f]
[ 0.265402] pnp 00:02: [io 0x00c0-0x00df]
[ 0.265545] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.265581] pnp 00:03: [io 0x0070-0x0071]
[ 0.265599] pnp 00:03: [irq 8]
[ 0.265732] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.265837] pnp 00:04: [io 0x0060]
[ 0.265843] pnp 00:04: [io 0x0064]
[ 0.265854] pnp 00:04: [irq 1]
[ 0.265997] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.266091] pnp 00:05: [irq 12]
[ 0.266232] pnp 00:05: Plug and Play ACPI device, IDs SYN0a13 SYN0a00 SYN0002 PNP0f13 (active)
[ 0.266263] pnp 00:06: [io 0x0061]
[ 0.266396] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.266427] pnp 00:07: [io 0x00f0-0x00ff]
[ 0.266438] pnp 00:07: [irq 13]
[ 0.266581] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.266934] pnp 00:08: [io 0x0010-0x001f]
[ 0.266941] pnp 00:08: [io 0x0022-0x003f]
[ 0.266946] pnp 00:08: [io 0x0044-0x004d]
[ 0.266952] pnp 00:08: [io 0x0050-0x005e]
[ 0.266957] pnp 00:08: [io 0x0063]
[ 0.266961] pnp 00:08: [io 0x0065]
[ 0.266966] pnp 00:08: [io 0x0067-0x006f]
[ 0.266971] pnp 00:08: [io 0x0072-0x007f]
[ 0.266976] pnp 00:08: [io 0x0080]
[ 0.266981] pnp 00:08: [io 0x0084-0x0086]
[ 0.266986] pnp 00:08: [io 0x0088]
[ 0.266991] pnp 00:08: [io 0x008c-0x008e]
[ 0.266997] pnp 00:08: [io 0x0090-0x009f]
[ 0.267002] pnp 00:08: [io 0x00a2-0x00bf]
[ 0.267007] pnp 00:08: [io 0x00e0-0x00ef]
[ 0.267012] pnp 00:08: [io 0x025c-0x025f]
[ 0.267017] pnp 00:08: [io 0x0380-0x0383]
[ 0.267023] pnp 00:08: [io 0x0400-0x041f]
[ 0.267028] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.267033] pnp 00:08: [io 0x0800-0x087f]
[ 0.267039] pnp 00:08: [io 0x0400-0x03ff disabled]
[ 0.267044] pnp 00:08: [io 0x0480-0x04bf]
[ 0.267050] pnp 00:08: [mem 0x8c000000-0x8c01ffff]
[ 0.267056] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
[ 0.267062] pnp 00:08: [mem 0xfed20000-0xfed3ffff]
[ 0.267067] pnp 00:08: [mem 0xfed50000-0xfed8ffff]
[ 0.267073] pnp 00:08: [mem 0xffb00000-0xffbfffff]
[ 0.267079] pnp 00:08: [mem 0xfff00000-0xffffffff]
[ 0.267322] system 00:08: [io 0x025c-0x025f] has been reserved
[ 0.267330] system 00:08: [io 0x0380-0x0383] has been reserved
[ 0.267337] system 00:08: [io 0x0400-0x041f] has been reserved
[ 0.267344] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.267351] system 00:08: [io 0x0800-0x087f] has been reserved
[ 0.267358] system 00:08: [io 0x0480-0x04bf] has been reserved
[ 0.267366] system 00:08: [mem 0x8c000000-0x8c01ffff] has been reserved
[ 0.267373] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.267381] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.267388] system 00:08: [mem 0xfed50000-0xfed8ffff] has been reserved
[ 0.267395] system 00:08: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.267403] system 00:08: [mem 0xfff00000-0xffffffff] could not be reserved
[ 0.267411] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.267595] pnp 00:09: [mem 0xfed00000-0xfed003ff]
[ 0.267744] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.267904] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
[ 0.267911] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
[ 0.268199] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.268207] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.268215] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.268338] pnp 00:0b: [mem 0xe0000000-0xe3ffffff]
[ 0.268522] system 00:0b: [mem 0xe0000000-0xe3ffffff] has been reserved
[ 0.268531] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.269205] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[ 0.269212] pnp 00:0c: [mem 0x000c0000-0x000cffff]
[ 0.269218] pnp 00:0c: [mem 0x000e0000-0x000fffff]
[ 0.269224] pnp 00:0c: [mem 0x00100000-0x7f7fffff]
[ 0.269230] pnp 00:0c: [mem 0x00000000-0xffffffff disabled]
[ 0.269457] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.269466] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.269473] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.269480] system 00:0c: [mem 0x00100000-0x7f7fffff] could not be reserved
[ 0.269488] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.270048] pnp: PnP ACPI: found 13 devices
[ 0.270053] ACPI: ACPI bus type pnp unregistered
[ 0.315819] pci 0000:00:1c.0: BAR 8: assigned [mem 0x7f800000-0x7f9fffff]
[ 0.315830] pci 0000:00:1c.0: BAR 9: assigned [mem 0x7fa00000-0x7fbfffff 64bit pref]
[ 0.315840] pci 0000:00:1c.3: BAR 9: assigned [mem 0x7fc00000-0x7fdfffff 64bit pref]
[ 0.315850] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff]
[ 0.315858] pci 0000:00:1c.1: BAR 7: assigned [io 0x2000-0x2fff]
[ 0.315864] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
[ 0.315871] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.315882] pci 0000:00:1c.0: bridge window [mem 0x7f800000-0x7f9fffff]
[ 0.315891] pci 0000:00:1c.0: bridge window [mem 0x7fa00000-0x7fbfffff 64bit pref]
[ 0.315904] pci 0000:00:1c.1: PCI bridge to [bus 02-03]
[ 0.315911] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.315922] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.315931] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf6ffffff 64bit pref]
[ 0.315943] pci 0000:00:1c.3: PCI bridge to [bus 01-01]
[ 0.315950] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 0.315961] pci 0000:00:1c.3: bridge window [mem 0xf7f00000-0xf7ffffff]
[ 0.315970] pci 0000:00:1c.3: bridge window [mem 0x7fc00000-0x7fdfffff 64bit pref]
[ 0.315983] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 0.315987] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.315997] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.316031] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.316060] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.316087] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.316101] pci 0000:00:1c.0: setting latency timer to 64
[ 0.316117] pci 0000:00:1c.1: enabling device (0106 -> 0107)
[ 0.316135] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.316147] pci 0000:00:1c.1: setting latency timer to 64
[ 0.316169] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.316181] pci 0000:00:1c.3: setting latency timer to 64
[ 0.316198] pci 0000:00:1e.0: setting latency timer to 64
[ 0.316210] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.316219] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.316227] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.316236] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.316245] pci_bus 0000:00: resource 8 [mem 0x7f800000-0xffffffff]
[ 0.316251] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
[ 0.316257] pci_bus 0000:04: resource 1 [mem 0x7f800000-0x7f9fffff]
[ 0.316264] pci_bus 0000:04: resource 2 [mem 0x7fa00000-0x7fbfffff 64bit pref]
[ 0.316270] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.316276] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.316283] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf6ffffff 64bit pref]
[ 0.316290] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.316296] pci_bus 0000:01: resource 1 [mem 0xf7f00000-0xf7ffffff]
[ 0.316302] pci_bus 0000:01: resource 2 [mem 0x7fc00000-0x7fdfffff 64bit pref]
[ 0.316309] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.316315] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.316321] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.316327] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.316334] pci_bus 0000:05: resource 8 [mem 0x7f800000-0xffffffff]
[ 0.316424] NET: Registered protocol family 2
[ 0.316561] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.317083] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.318000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.318417] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.318424] TCP reno registered
[ 0.318432] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.318451] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.318699] NET: Registered protocol family 1
[ 0.318746] pci 0000:00:02.0: Boot video device
[ 0.318908] PCI: CLS 32 bytes, default 64
[ 0.319023] Trying to unpack rootfs image as initramfs...
[ 1.205410] Freeing initrd memory: 18460k freed
[ 1.224225] audit: initializing netlink socket (disabled)
[ 1.224248] type=2000 audit(1297927725.220:1): initialized
[ 1.225103] highmem bounce pool size: 64 pages
[ 1.225113] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.233518] VFS: Disk quotas dquot_6.5.2
[ 1.233761] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.235928] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.236361] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 1.236696] fuse init (API version 7.16)
[ 1.237142] msgmni has been set to 1729
[ 1.237863] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.237870] io scheduler noop registered
[ 1.237910] io scheduler cfq registered (default)
[ 1.238123] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.238192] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 1.238387] pcieport 0000:00:1c.1: setting latency timer to 64
[ 1.238450] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 1.238641] pcieport 0000:00:1c.3: setting latency timer to 64
[ 1.238703] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[ 1.239207] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.239462] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.239468] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.240341] intel_idle: MWAIT substates: 0x20220
[ 1.240357] intel_idle: v0.4 model 0x1C
[ 1.240361] intel_idle: lapic_timer_reliable_states 0x2
[ 1.240377] Marking TSC unstable due to TSC halts in idle states deeper than C2
[ 1.240778] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.240976] ACPI: AC Adapter [AC0] (on-line)
[ 1.241409] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 1.246191] ACPI: Lid Switch [LID]
[ 1.246427] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 1.246438] ACPI: Sleep Button [SLPB]
[ 1.246650] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 1.246659] ACPI: Power Button [PWRB]
[ 1.246875] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.246884] ACPI: Power Button [PWRF]
[ 1.247545] ACPI: acpi_idle yielding to intel_idle
[ 1.262379] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.262386] ACPI: Thermal Zone [TZ00] (41 C)
[ 1.263870] Linux agpgart interface v0.103
[ 1.264082] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[ 1.264235] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 1.264384] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 1.264733] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.264957] [drm] Initialized drm 1.1.0 20060810
[ 1.264998] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.265007] i915 0000:00:02.0: setting latency timer to 64
[ 1.304275] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.304281] [drm] Driver supports precise vblank timestamp query.
[ 1.308235] [drm:parse_general_definitions], crt_ddc_bus_pin: 2
[ 1.308270] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
[ 1.308276] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x600" 0 51100 1024 1117 1152 1250 600 601 606 680 0x8 0xa
[ 1.308348] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
[ 1.308354] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[ 1.308368] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
[ 1.308410] [drm:intel_dsm_pci_probe], no _DSM method for intel device
[ 1.308433] [drm:intel_modeset_init], 2 display pipes available.
[ 1.308446] [drm:intel_crtc_init], swapping pipes & planes for FBC
[ 1.343903] [drm:intel_crtc_init], swapping pipes & planes for FBC
[ 1.399554] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.399570] ACPI: Battery Slot [BAT0] (battery present)
[ 1.492487] [drm:intel_tv_init], Integrated TV is not present.
[ 1.492502] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.492887] [drm] initialized overlay support
[ 1.748035] [drm:i915_get_vblank_timestamp], crtc 0 is disabled
[ 1.804024] [drm:intel_wait_for_vblank], vblank wait timed out
[ 1.808994] [drm:intel_update_fbc],
[ 1.809000] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[ 1.809007] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[ 1.809014] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 29
[ 1.809020] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
[ 1.809027] [drm:i9xx_update_wm], memory self refresh disabled
[ 1.809039] [drm:i915_get_vblank_timestamp], crtc 1 is disabled
[ 1.864022] [drm:intel_wait_for_vblank], vblank wait timed out
[ 1.868992] [drm:intel_update_fbc],
[ 1.868996] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[ 1.869003] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[ 1.869009] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 29
[ 1.869015] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
[ 1.869022] [drm:i9xx_update_wm], memory self refresh disabled
[ 1.869032] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 1.869053] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 1.869060] [drm:drm_mode_debug_printmodeline], Modeline 13:"1024x600" 60 51000 1024 1117 1152 1250 600 601 606 680 0x48 0xa
[ 1.869072] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 1.884023] [drm:intel_crt_detect], CRT not detected via hotplug
[ 1.884030] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 1.884037] [drm:drm_setup_crtcs],
[ 1.884042] [drm:drm_enable_connectors], connector 5 enabled? yes
[ 1.884048] [drm:drm_enable_connectors], connector 11 enabled? no
[ 1.884054] [drm:drm_target_preferred], looking for cmdline mode on connector 5
[ 1.884061] [drm:drm_target_preferred], looking for preferred mode on connector 5
[ 1.884067] [drm:drm_target_preferred], found mode 1024x600
[ 1.884072] [drm:drm_setup_crtcs], picking CRTCs for 4096x4096 config
[ 1.884079] [drm:drm_setup_crtcs], desired mode 1024x600 set on crtc 4
[ 1.888993] [drm:intelfb_create], allocated 1024x600 fb: 0x00020000, bo f44b0e00
[ 1.889426] [drm:drm_crtc_helper_set_config],
[ 1.889431] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB]
[ 1.889442] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[ 1.889448] [drm:drm_crtc_helper_set_config],
[ 1.889452] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:14] #connectors=1 (x y) (0 0)
[ 1.889463] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
[ 1.889468] [drm:drm_crtc_helper_set_config], modes are different, full mode set
[ 1.889472] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 1.889481] [drm:drm_mode_debug_printmodeline], Modeline 8:"1024x600" 60 51000 1024 1117 1152 1250 600 601 606 680 0x48 0xa
[ 1.889492] [drm:drm_crtc_helper_set_config], encoder changed, full mode switch
[ 1.889497] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch
[ 1.889502] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 1.889508] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[ 1.889513] [drm:drm_mode_debug_printmodeline], Modeline 8:"1024x600" 60 51000 1024 1117 1152 1250 600 601 606 680 0x48 0xa
[ 1.889528] [drm:drm_crtc_helper_set_mode], [CRTC:4]
[ 1.889539] [drm:intel_crtc_mode_set], using SSC reference clock of 100 MHz
[ 1.889926] [drm:intel_crtc_mode_set], Mode for pipe B:
[ 1.889931] [drm:drm_mode_debug_printmodeline], Modeline 8:"1024x600" 60 51000 1024 1117 1152 1250 600 601 606 680 0x48 0xa
[ 1.928028] [drm:intel_pipe_set_base_atomic], Writing base 00020000 00000000 0 0 4096
[ 1.928037] [drm:intel_update_fbc],
[ 1.928041] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[ 1.928047] [drm:intel_calculate_wm], FIFO entries required for mode: 16
[ 1.928052] [drm:intel_calculate_wm], FIFO watermark level: 10
[ 1.928057] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[ 1.928062] [drm:i9xx_update_wm], FIFO watermarks - A: 10, B: 29
[ 1.928067] [drm:i9xx_update_wm], self-refresh entries: 64
[ 1.928072] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 10, B: 29, C: 2, SR 63
[ 1.928078] [drm:i9xx_update_wm], memory self refresh enabled
[ 1.928084] [drm:drm_crtc_helper_set_mode], [ENCODER:6:LVDS-6] set [MODE:8:1024x600]
[ 1.928090] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[ 1.928095] [drm:intel_calculate_wm], FIFO entries required for mode: 16
[ 1.928100] [drm:intel_calculate_wm], FIFO watermark level: 10
[ 1.928105] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[ 1.928110] [drm:i9xx_update_wm], FIFO watermarks - A: 10, B: 29
[ 1.928115] [drm:i9xx_update_wm], self-refresh entries: 64
[ 1.928119] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 10, B: 29, C: 2, SR 63
[ 1.928126] [drm:i9xx_update_wm], memory self refresh enabled
[ 1.960059] [drm:intel_update_fbc],
[ 1.960064] [drm:intel_lvds_enable], applying panel-fitter: 0, 0
[ 1.960077] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[ 1.960082] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] set DPMS on
[ 1.960157] [drm:drm_crtc_helper_set_config],
[ 1.960161] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:14] #connectors=1 (x y) (0 0)
[ 1.960174] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 1.960179] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[ 1.960185] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] set DPMS on
[ 1.966883] Console: switching to colour frame buffer device 128x37
[ 1.966896] [drm:drm_crtc_helper_set_config],
[ 1.966900] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:14] #connectors=1 (x y) (0 0)
[ 1.966913] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 1.966918] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[ 1.966924] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] set DPMS on
[ 1.973655] fb0: inteldrmfb frame buffer device
[ 1.973659] drm: registered panic notifier
[ 1.974023] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1.979840] brd: module loaded
[ 1.982717] loop: module loaded
[ 1.983097] ahci 0000:00:1f.2: version 3.0
[ 1.983132] ahci 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 1.983199] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 1.983303] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
[ 1.983311] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 1.983321] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.985551] scsi0 : ahci
[ 1.985943] scsi1 : ahci
[ 1.986248] scsi2 : ahci
[ 1.986546] scsi3 : ahci
[ 1.987241] ata1: SATA max UDMA/133 abar m1024@0xf7db7800 port 0xf7db7900 irq 43
[ 1.987247] ata2: DUMMY
[ 1.987251] ata3: DUMMY
[ 1.987254] ata4: DUMMY
[ 1.987837] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.987893] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.987927] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.987934] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.988154] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.008236] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 2.008257] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.012155] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.012189] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7db7c00
[ 2.028033] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.028082] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.028088] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.028094] usb usb1: Product: EHCI Host Controller
[ 2.028100] usb usb1: Manufacturer: Linux 2.6.38-rc2-00090-g9db4a9c ehci_hcd
[ 2.028105] usb usb1: SerialNumber: 0000:00:1d.7
[ 2.028540] hub 1-0:1.0: USB hub found
[ 2.028551] hub 1-0:1.0: 8 ports detected
[ 2.028890] usbcore: registered new interface driver uas
[ 2.029090] usbcore: registered new interface driver usbserial
[ 2.029176] USB Serial support registered for generic
[ 2.029274] usbcore: registered new interface driver usbserial_generic
[ 2.029279] usbserial: USB Serial Driver core
[ 2.029525] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.047121] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.047135] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.047819] mousedev: PS/2 mouse device common for all mice
[ 2.048627] rtc_cmos 00:03: RTC can wake from S4
[ 2.065332] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 2.068243] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 2.068288] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 2.069333] cpuidle: using governor ladder
[ 2.070595] cpuidle: using governor menu
[ 2.076937] usbcore: registered new interface driver usbhid
[ 2.076942] usbhid: USB HID core driver
[ 2.078234] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input5
[ 2.088627] Registered led device: eeepc::touchpad
[ 2.304049] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.305207] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.340039] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 2.352139] ata1.00: ATA-8: ST9160314AS, 0002SDM1, max UDMA/133
[ 2.352146] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.354277] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.354617] ata1.00: configured for UDMA/133
[ 2.354876] scsi 0:0:0:0: Direct-Access ATA ST9160314AS 0002 PQ: 0 ANSI: 5
[ 2.355448] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.355621] sd 0:0:0:0: [sda] Write Protect is off
[ 2.355630] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.355706] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.355842] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.415224] sda: sda1 sda2 < sda5 sda6 sda7 > sda4
[ 2.416899] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.550120] usb 1-2: New USB device found, idVendor=13d3, idProduct=5071
[ 2.550128] usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[ 2.550134] usb 1-2: Product: USB2.0 UVC 1.3M WebCam
[ 2.550139] usb 1-2: Manufacturer: GenesysLogic Technology Co., Ltd.
[ 2.668034] usb 1-3: new high speed USB device using ehci_hcd and address 3
[ 2.801483] usb 1-3: New USB device found, idVendor=058f, idProduct=6335
[ 2.801490] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.801496] usb 1-3: Product: Mass Storage Device
[ 2.801501] usb 1-3: Manufacturer: Generic
[ 2.801506] usb 1-3: SerialNumber: 058F63356336
[ 3.314357] TCP cubic registered
[ 3.315141] NET: Registered protocol family 10
[ 3.316351] NET: Registered protocol family 17
[ 3.316414] Registering the dns_resolver key type
[ 3.317329] Using IPI No-Shortcut mode
[ 3.317872] PM: Hibernation image not present or could not be loaded.
[ 3.317889] registered taskstats version 1
[ 3.318343] rtc_cmos 00:03: setting system clock to 2011-02-17 07:28:48 UTC (1297927728)
[ 3.318515] Freeing unused kernel memory: 360k freed
[ 3.318830] Write protecting the kernel text: 3440k
[ 3.318880] Write protecting the kernel read-only data: 1328k
[ 3.404650] udev[883]: starting version 165
[ 3.507847] [drm:drm_crtc_helper_set_config],
[ 3.507856] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:14] #connectors=1 (x y) (0 0)
[ 3.507883] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 3.507892] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[ 3.507900] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] set DPMS on
[ 3.925768] [drm:drm_crtc_helper_set_config],
[ 3.925778] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB]
[ 3.925799] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 3.925808] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[ 3.925816] [drm:drm_crtc_helper_set_config],
[ 3.925822] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:14] #connectors=1 (x y) (0 0)
[ 3.925843] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 3.925852] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[ 3.925860] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] set DPMS on
[ 3.925927] [drm:drm_crtc_helper_set_config],
[ 3.925935] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB]
[ 3.925953] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 3.925962] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[ 3.925970] [drm:drm_crtc_helper_set_config],
[ 3.925977] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:14] #connectors=1 (x y) (0 0)
[ 3.925998] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 3.926006] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[ 3.926012] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] set DPMS on
[ 3.926240] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
[ 3.926252] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
[ 3.926270] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 3.926278] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 3.926301] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 3.926308] [drm:drm_mode_debug_printmodeline], Modeline 13:"1024x600" 60 51000 1024 1117 1152 1250 600 601 606 680 0x48 0xa
[ 3.926323] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 3.934923] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 3.934938] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 3.948064] [drm:intel_crt_detect], CRT not detected via hotplug
[ 3.948075] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 3.948099] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 3.948107] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 3.964027] [drm:intel_crt_detect], CRT not detected via hotplug
[ 3.964037] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 4.046412] [drm:drm_mode_addfb], [FB:15]
[ 4.046458] [drm:drm_mode_setcrtc], [CRTC:4]
[ 4.046470] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1]
[ 4.046476] [drm:drm_crtc_helper_set_config],
[ 4.046481] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:15] #connectors=1 (x y) (0 0)
[ 4.046497] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 4.051197] [drm:intel_pipe_set_base_atomic], Writing base 00280000 00000000 0 0 4096
[ 4.051209] [drm:intel_update_fbc],
[ 4.064042] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[ 4.064051] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] set DPMS on
[ 4.064106] [drm:drm_crtc_helper_set_config],
[ 4.064110] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:14] #connectors=1 (x y) (0 0)
[ 4.064126] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 4.064133] [drm:intel_pipe_set_base_atomic], Writing base 00020000 00000000 0 0 4096
[ 4.064141] [drm:intel_update_fbc],
[ 4.080094] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[ 4.080107] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] set DPMS on
[ 4.089348] [drm:drm_mode_setcrtc], [CRTC:4]
[ 4.089367] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1]
[ 4.089376] [drm:drm_crtc_helper_set_config],
[ 4.089382] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:15] #connectors=1 (x y) (0 0)
[ 4.089406] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 4.089422] [drm:intel_pipe_set_base_atomic], Writing base 00280000 00000000 0 0 4096
[ 4.089434] [drm:intel_update_fbc],
[ 4.096107] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[ 4.096121] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] set DPMS on
[ 4.587851] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 7.903948] Adding 4160796k swap on /dev/sda7. Priority:-1 extents:1 across:4160796k
[ 8.588161] udev[1177]: starting version 167
[ 9.075954] uhci_hcd: USB Universal Host Controller Interface driver
[ 9.117518] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 9.117542] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 9.117553] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 9.117764] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 9.121459] atl1c 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 9.121483] atl1c 0000:01:00.0: setting latency timer to 64
[ 9.136147] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
[ 9.136263] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 9.136274] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.136282] usb usb2: Product: UHCI Host Controller
[ 9.136289] usb usb2: Manufacturer: Linux 2.6.38-rc2-00090-g9db4a9c uhci_hcd
[ 9.136297] usb usb2: SerialNumber: 0000:00:1d.0
[ 9.136710] hub 2-0:1.0: USB hub found
[ 9.136725] hub 2-0:1.0: 2 ports detected
[ 9.136937] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 9.136959] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 9.136968] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 9.137166] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 9.152289] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480
[ 9.152404] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 9.152414] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.152423] usb usb3: Product: UHCI Host Controller
[ 9.152430] usb usb3: Manufacturer: Linux 2.6.38-rc2-00090-g9db4a9c uhci_hcd
[ 9.152437] usb usb3: SerialNumber: 0000:00:1d.1
[ 9.152874] hub 3-0:1.0: USB hub found
[ 9.152892] hub 3-0:1.0: 2 ports detected
[ 9.153122] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 9.153144] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 9.153154] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 9.153355] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 9.168383] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
[ 9.168503] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 9.168513] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.168522] usb usb4: Product: UHCI Host Controller
[ 9.168530] usb usb4: Manufacturer: Linux 2.6.38-rc2-00090-g9db4a9c uhci_hcd
[ 9.168537] usb usb4: SerialNumber: 0000:00:1d.2
[ 9.168964] hub 4-0:1.0: USB hub found
[ 9.168982] hub 4-0:1.0: 2 ports detected
[ 9.169218] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 9.169240] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 9.169250] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 9.169461] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 9.174936] intel_rng: FWH not detected
[ 9.204866] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880
[ 9.204991] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 9.205000] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9.205008] usb usb5: Product: UHCI Host Controller
[ 9.205015] usb usb5: Manufacturer: Linux 2.6.38-rc2-00090-g9db4a9c uhci_hcd
[ 9.205021] usb usb5: SerialNumber: 0000:00:1d.3
[ 9.205455] hub 5-0:1.0: USB hub found
[ 9.205473] hub 5-0:1.0: 2 ports detected
[ 9.273889] atl1c 0000:01:00.0: version 1.0.1.0-NAPI
[ 9.322889] cfg80211: Calling CRDA to update world regulatory domain
[ 9.368323] Linux video capture interface: v2.00
[ 9.446248] uvcvideo: Found UVC 1.00 device USB2.0 UVC 1.3M WebCam (13d3:5071)
[ 9.464654] input: USB2.0 UVC 1.3M WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/input/input6
[ 9.464880] usbcore: registered new interface driver uvcvideo
[ 9.464887] USB Video Class driver (v1.0.0)
[ 9.504064] Initializing USB Mass Storage driver...
[ 9.530557] scsi4 : usb-storage 1-3:1.0
[ 9.555923] usbcore: registered new interface driver usb-storage
[ 9.555932] USB Mass Storage support registered.
[ 10.160306] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 10.160329] ath9k 0000:02:00.0: setting latency timer to 64
[ 10.213073] ath: EEPROM regdomain: 0x60
[ 10.213079] ath: EEPROM indicates we should expect a direct regpair map
[ 10.213086] ath: Country alpha2 being used: 00
[ 10.213090] ath: Regpair used: 0x60
[ 10.404849] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 10.406678] Registered led device: ath9k-phy0::radio
[ 10.406785] Registered led device: ath9k-phy0::assoc
[ 10.406873] Registered led device: ath9k-phy0::tx
[ 10.406973] Registered led device: ath9k-phy0::rx
[ 10.406996] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8aa0000, irq=17
[ 10.523839] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1a0b1, caps: 0xd04733/0xa40000/0xa0000
[ 10.556913] scsi 4:0:0:0: Direct-Access Single Flash Reader 1.00 PQ: 0 ANSI: 0
[ 10.567746] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 10.595405] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 10.782883] cfg80211: World regulatory domain updated:
[ 10.782891] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 10.782899] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.782905] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.782912] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.782918] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.782925] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.205089] sd 4:0:0:0: [sdb] 3907584 512-byte logical blocks: (2.00 GB/1.86 GiB)
[ 11.205825] sd 4:0:0:0: [sdb] Write Protect is off
[ 11.205833] sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 11.206573] sd 4:0:0:0: [sdb] No Caching mode page present
[ 11.206581] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 11.210325] sd 4:0:0:0: [sdb] No Caching mode page present
[ 11.210335] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 11.211980] sdb: sdb1
[ 11.214956] sd 4:0:0:0: [sdb] No Caching mode page present
[ 11.214968] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 11.214978] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 11.859672] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 11.859773] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 11.859829] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 11.999075] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 11.999440] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 12.011840] [drm:intel_crt_detect], CRT not detected via hotplug
[ 12.011853] [drm:output_poll_execute], [CONNECTOR:11:VGA-1] status updated from 2 to 2
[ 12.269961] device-mapper: uevent: version 1.0.3
[ 12.272504] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[ 13.176597] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 30.057814] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 35.044743] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 35.056640] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X
[ 35.056750] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 36.537153] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X
[ 36.537240] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 36.683100] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
[ 36.683120] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
[ 36.683301] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 36.683314] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 36.683348] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 36.683359] [drm:drm_mode_debug_printmodeline], Modeline 13:"1024x600" 60 51000 1024 1117 1152 1250 600 601 606 680 0x48 0xa
[ 36.683380] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 36.683718] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 36.683732] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 36.696050] [drm:intel_crt_detect], CRT not detected via hotplug
[ 36.696062] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 36.696085] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 36.696092] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 36.712037] [drm:intel_crt_detect], CRT not detected via hotplug
[ 36.712048] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 36.763006] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 36.763020] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 36.763056] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 36.763068] [drm:drm_mode_debug_printmodeline], Modeline 13:"1024x600" 60 51000 1024 1117 1152 1250 600 601 606 680 0x48 0xa
[ 36.763095] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 36.766690] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 36.766701] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 36.780059] [drm:intel_crt_detect], CRT not detected via hotplug
[ 36.780070] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 36.780088] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 36.780096] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 36.796066] [drm:intel_crt_detect], CRT not detected via hotplug
[ 36.796081] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 36.945822] [drm:drm_mode_addfb], [FB:18]
[ 36.946091] [drm:drm_mode_setcrtc], [CRTC:4]
[ 36.946106] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1]
[ 36.946113] [drm:drm_crtc_helper_set_config],
[ 36.946119] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:18] #connectors=1 (x y) (0 0)
[ 36.946142] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 36.947826] [drm:intel_pipe_set_base_atomic], Writing base 00800000 00000000 0 0 4096
[ 36.947838] [drm:intel_update_fbc],
[ 36.968060] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[ 36.968070] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] set DPMS on
[ 41.253731] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[ 41.662997] EXT4-fs (sda6): re-mounted. Opts: commit=0
[ 43.721668] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 43.721680] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 43.721706] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 43.721714] [drm:drm_mode_debug_printmodeline], Modeline 13:"1024x600" 60 51000 1024 1117 1152 1250 600 601 606 680 0x48 0xa
[ 43.721731] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 43.722410] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 43.722420] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 43.736050] [drm:intel_crt_detect], CRT not detected via hotplug
[ 43.736061] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 43.736077] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 43.736084] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 43.752043] [drm:intel_crt_detect], CRT not detected via hotplug
[ 43.752052] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 43.755772] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 43.755784] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 43.755809] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 43.755817] [drm:drm_mode_debug_printmodeline], Modeline 13:"1024x600" 60 51000 1024 1117 1152 1250 600 601 606 680 0x48 0xa
[ 43.755834] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 43.757253] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 43.757271] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 43.772067] [drm:intel_crt_detect], CRT not detected via hotplug
[ 43.772082] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 43.772104] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 43.772116] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 43.788059] [drm:intel_crt_detect], CRT not detected via hotplug
[ 43.788073] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 43.813528] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 43.813547] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 43.813584] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 43.813597] [drm:drm_mode_debug_printmodeline], Modeline 13:"1024x600" 60 51000 1024 1117 1152 1250 600 601 606 680 0x48 0xa
[ 43.813627] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 43.814703] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 43.814718] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 43.828044] [drm:intel_crt_detect], CRT not detected via hotplug
[ 43.828060] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 43.828085] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 43.828097] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 43.844059] [drm:intel_crt_detect], CRT not detected via hotplug
[ 43.844073] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 43.847251] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 43.847269] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 43.847307] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 43.847319] [drm:drm_mode_debug_printmodeline], Modeline 13:"1024x600" 60 51000 1024 1117 1152 1250 600 601 606 680 0x48 0xa
[ 43.847346] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 43.848748] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 43.848772] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 43.864043] [drm:intel_crt_detect], CRT not detected via hotplug
[ 43.864058] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 43.864081] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 43.864092] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 43.880073] [drm:intel_crt_detect], CRT not detected via hotplug
[ 43.880092] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 45.245249] [drm:intel_crtc_cursor_set],
[ 45.880029] eth0: no IPv6 routers present
[ 46.432028] [drm:intel_crt_detect], CRT not detected via hotplug
[ 46.704045] [drm:intel_crt_detect], CRT not detected via hotplug
[ 46.704056] [drm:output_poll_execute], [CONNECTOR:11:VGA-1] status updated from 2 to 2
[ 48.516657] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[ 48.522907] EXT4-fs (sda6): re-mounted. Opts: commit=0
[ 77.036056] [drm:intel_crt_detect], CRT not detected via hotplug
[ 108.048054] [drm:intel_crt_detect], CRT not detected via hotplug
[ 112.288240] [drm:intel_crtc_cursor_set],
[ 112.288256] [drm:intel_crtc_cursor_set], cursor off
[ 112.584603] [drm:intel_crtc_cursor_set],
[ 116.066173] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 116.066185] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 116.066212] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 116.066220] [drm:drm_mode_debug_printmodeline], Modeline 13:"1024x600" 60 51000 1024 1117 1152 1250 600 601 606 680 0x48 0xa
[ 116.066239] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 116.066959] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 116.066970] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 116.080052] [drm:intel_crt_detect], CRT not detected via hotplug
[ 116.080064] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 116.080086] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 116.080094] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 116.096051] [drm:intel_crt_detect], CRT not detected via hotplug
[ 116.096064] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 116.100562] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 116.100577] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 116.100609] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 116.100619] [drm:drm_mode_debug_printmodeline], Modeline 13:"1024x600" 60 51000 1024 1117 1152 1250 600 601 606 680 0x48 0xa
[ 116.100642] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 116.101597] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 116.101610] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 116.116030] [drm:intel_crt_detect], CRT not detected via hotplug
[ 116.116042] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 116.116064] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 116.116071] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 116.132080] [drm:intel_crt_detect], CRT not detected via hotplug
[ 116.132094] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 116.136740] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 116.136757] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 116.136790] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 116.136800] [drm:drm_mode_debug_printmodeline], Modeline 13:"1024x600" 60 51000 1024 1117 1152 1250 600 601 606 680 0x48 0xa
[ 116.136825] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 116.137867] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 116.137882] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 116.152155] [drm:intel_crt_detect], CRT not detected via hotplug
[ 116.152174] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 116.152204] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 116.152217] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 116.168075] [drm:intel_crt_detect], CRT not detected via hotplug
[ 116.168092] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 116.171422] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 116.171440] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 116.171476] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 116.171489] [drm:drm_mode_debug_printmodeline], Modeline 13:"1024x600" 60 51000 1024 1117 1152 1250 600 601 606 680 0x48 0xa
[ 116.171517] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 116.173522] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 116.173540] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 116.188046] [drm:intel_crt_detect], CRT not detected via hotplug
[ 116.188062] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 116.188086] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 116.188097] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 116.204063] [drm:intel_crt_detect], CRT not detected via hotplug
[ 116.204077] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 119.129534] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 119.129551] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 119.129587] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 119.129597] [drm:drm_mode_debug_printmodeline], Modeline 13:"1024x600" 60 51000 1024 1117 1152 1250 600 601 606 680 0x48 0xa
[ 119.129622] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 119.130629] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 119.130644] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 119.144113] [drm:intel_crt_detect], CRT not detected via hotplug
[ 119.144128] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 119.144157] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 119.144169] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 119.160059] [drm:intel_crt_detect], CRT not detected via hotplug
[ 119.160075] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 123.857844] wlan0: authenticate with 00:1c:10:b2:60:74 (try 1)
[ 123.867558] wlan0: authenticated
[ 123.867618] wlan0: associate with 00:1c:10:b2:60:74 (try 1)
[ 123.870132] wlan0: RX AssocResp from 00:1c:10:b2:60:74 (capab=0x11 status=0 aid=1)
[ 123.870142] wlan0: associated
[ 123.870859] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 124.027105] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 124.027117] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 124.027142] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 124.027150] [drm:drm_mode_debug_printmodeline], Modeline 13:"1024x600" 60 51000 1024 1117 1152 1250 600 601 606 680 0x48 0xa
[ 124.027168] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 124.028411] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 124.028426] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 124.044041] [drm:intel_crt_detect], CRT not detected via hotplug
[ 124.044054] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 124.044076] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 124.044084] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 124.060035] [drm:intel_crt_detect], CRT not detected via hotplug
[ 124.060045] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 126.096061] [drm:intel_crt_detect], CRT not detected via hotplug
[ 126.096076] [drm:output_poll_execute], [CONNECTOR:11:VGA-1] status updated from 2 to 2
[ 134.672042] wlan0: no IPv6 routers present
[ 136.103985] [drm:drm_mode_addfb], [FB:15]
[ 139.020057] [drm:intel_crt_detect], CRT not detected via hotplug
[ 170.016060] [drm:intel_crt_detect], CRT not detected via hotplug
[ 186.836348] [drm:drm_mode_addfb], [FB:18]
[ 201.020069] [drm:intel_crt_detect], CRT not detected via hotplug
[-- Attachment #3: dmesg_good --]
[-- Type: text/plain, Size: 73278 bytes --]
[ 0.000000] Linux version 2.6.38-rc2-00079-g4a1dc3f (lex@zwerg) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #186 SMP Fri Feb 11 19:20:25 CET 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f7a0000 (usable)
[ 0.000000] BIOS-e820: 000000007f7a0000 - 000000007f7ae000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007f7ae000 - 000000007f7f0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f7f0000 - 000000007f800000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI present.
[ 0.000000] DMI: 1005HA/1005HA, BIOS 1401 02/26/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7f7a0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 080000000 write-back
[ 0.000000] 1 base 07F800000 mask 0FF800000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 17fb000-1800000
[ 0.000000] RAMDISK: 35be2000 - 36de9000
[ 0.000000] ACPI: RSDP 000fb9e0 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 7f7a0000 0003C (v01 A_M_I_ OEMRSDT 02001026 MSFT 00000097)
[ 0.000000] ACPI: FACP 7f7a0200 00084 (v02 A_M_I_ OEMFACP 02001026 MSFT 00000097)
[ 0.000000] ACPI: DSDT 7f7a0430 080A2 (v01 A1311 A1311000 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 7f7ae000 00040
[ 0.000000] ACPI: APIC 7f7a0390 0005C (v01 A_M_I_ OEMAPIC 02001026 MSFT 00000097)
[ 0.000000] ACPI: MCFG 7f7a03f0 0003C (v01 A_M_I_ OEMMCFG 02001026 MSFT 00000097)
[ 0.000000] ACPI: OEMB 7f7ae040 00061 (v01 A_M_I_ AMI_OEM 02001026 MSFT 00000097)
[ 0.000000] ACPI: HPET 7f7a84e0 00038 (v01 A_M_I_ OEMHPET 02001026 MSFT 00000097)
[ 0.000000] ACPI: SSDT 7f7aeb40 004F0 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1151MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007f7a0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007f7a0
[ 0.000000] On node 0 totalpages: 522031
[ 0.000000] free_area_init_node: node 0, pgdat c14e0540, node_mem_map f4bf2200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2304 pages used for memmap
[ 0.000000] HighMem zone: 292514 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000
[ 0.000000] PM: Registered nosave memory: 00000000000e2000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 7f800000 (gap: 7f800000:7f600000)
[ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f7000000 s25856 r0 d23296 u2097152
[ 0.000000] pcpu-alloc: s25856 r0 d23296 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517951
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-rc2-00079-g4a1dc3f root=UUID=425014a2-7247-459c-8e13-9595b8fc5507 ro drm.debug=4 crashkernel=384M-2G:64M,2G-:128M quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007f7a0)
[ 0.000000] Memory: 2046460k/2088576k available (3433k kernel code, 41664k reserved, 1601k data, 360k init, 1179272k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff8f000 - 0xfffff000 ( 448 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc14eb000 - 0xc1545000 ( 360 kB)
[ 0.000000] .data : 0xc135a67e - 0xc14eab00 (1601 kB)
[ 0.000000] .text : 0xc1000000 - 0xc135a67e (3433 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:320
[ 0.000000] CPU 0 irqstacks, hard=f440c000 soft=f440e000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1666.501 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3333.00 BogoMIPS (lpj=6666004)
[ 0.004014] pid_max: default: 32768 minimum: 301
[ 0.004089] Security Framework initialized
[ 0.004108] Smack: Initializing.
[ 0.004114] AppArmor: AppArmor disabled by boot time parameter
[ 0.004140] Mount-cache hash table entries: 512
[ 0.004460] CPU: Physical Processor ID: 0
[ 0.004465] CPU: Processor Core ID: 0
[ 0.004469] mce: CPU supports 5 MCE banks
[ 0.004483] CPU0: Thermal monitoring enabled (TM2)
[ 0.004490] using mwait in idle threads.
[ 0.008014] ACPI: Core revision 20110112
[ 0.020096] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.020497] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061784] CPU0: Intel(R) Atom(TM) CPU N280 @ 1.66GHz stepping 02
[ 0.064003] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
[ 0.064003] ... version: 3
[ 0.064003] ... bit width: 40
[ 0.064003] ... generic registers: 2
[ 0.064003] ... value mask: 000000ffffffffff
[ 0.064003] ... max period: 000000007fffffff
[ 0.064003] ... fixed-purpose events: 3
[ 0.064003] ... event mask: 0000000700000003
[ 0.064003] CPU 1 irqstacks, hard=f4488000 soft=f448a000
[ 0.064003] Booting Node 0, Processors #1 Ok.
[ 0.008000] Initializing CPU#1
[ 0.152032] Brought up 2 CPUs
[ 0.152040] Total of 2 processors activated (6665.93 BogoMIPS).
[ 0.152307] devtmpfs: initialized
[ 0.152307] NET: Registered protocol family 16
[ 0.152346] ACPI: bus type pci registered
[ 0.152346] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.152346] PCI: not using MMCONFIG
[ 0.152375] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 0.152380] PCI: Using configuration type 1 for base access
[ 0.164414] bio: create slab <bio-0> at 0
[ 0.170698] ACPI: EC: Look up EC in DSDT
[ 0.174173] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.174843] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.184163] ACPI: SSDT 7f7ae180 001FA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.185034] ACPI: Dynamic OEM Table Load:
[ 0.185041] ACPI: SSDT (null) 001FA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.185507] ACPI: SSDT 7f7ae410 00724 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.186325] ACPI: Dynamic OEM Table Load:
[ 0.186332] ACPI: SSDT (null) 00724 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.186994] ACPI: SSDT 7f7ae0b0 000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.187839] ACPI: Dynamic OEM Table Load:
[ 0.187846] ACPI: SSDT (null) 000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.188122] ACPI: SSDT 7f7ae380 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.188942] ACPI: Dynamic OEM Table Load:
[ 0.188949] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.189794] ACPI: Interpreter enabled
[ 0.189806] ACPI: (supports S0 S3 S4 S5)
[ 0.189855] ACPI: Using IOAPIC for interrupt routing
[ 0.189925] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.191326] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
[ 0.191332] PCI: Using MMCONFIG for extended config space
[ 0.212551] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.212551] ACPI: No dock devices found.
[ 0.212551] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.212742] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.212864] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.212864] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.212864] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.212864] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.212864] pci_root PNP0A08:00: host bridge window [mem 0x7f800000-0xffffffff]
[ 0.212864] pci 0000:00:00.0: [8086:27ac] type 0 class 0x000600
[ 0.216195] pci 0000:00:02.0: [8086:27ae] type 0 class 0x000300
[ 0.216213] pci 0000:00:02.0: reg 10: [mem 0xf7e00000-0xf7e7ffff]
[ 0.216223] pci 0000:00:02.0: reg 14: [io 0xdc00-0xdc07]
[ 0.216234] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
[ 0.216244] pci 0000:00:02.0: reg 1c: [mem 0xf7dc0000-0xf7dfffff]
[ 0.216289] pci 0000:00:02.1: [8086:27a6] type 0 class 0x000380
[ 0.216303] pci 0000:00:02.1: reg 10: [mem 0xf7e80000-0xf7efffff]
[ 0.216416] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[ 0.216445] pci 0000:00:1b.0: reg 10: [mem 0xf7db8000-0xf7dbbfff 64bit]
[ 0.216540] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.216549] pci 0000:00:1b.0: PME# disabled
[ 0.216583] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[ 0.216679] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.216688] pci 0000:00:1c.0: PME# disabled
[ 0.216724] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
[ 0.216820] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.216829] pci 0000:00:1c.1: PME# disabled
[ 0.216867] pci 0000:00:1c.3: [8086:27d6] type 1 class 0x000604
[ 0.216963] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.216971] pci 0000:00:1c.3: PME# disabled
[ 0.217010] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[ 0.217075] pci 0000:00:1d.0: reg 20: [io 0xd400-0xd41f]
[ 0.217134] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[ 0.217200] pci 0000:00:1d.1: reg 20: [io 0xd480-0xd49f]
[ 0.217251] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[ 0.217317] pci 0000:00:1d.2: reg 20: [io 0xd800-0xd81f]
[ 0.217367] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[ 0.217433] pci 0000:00:1d.3: reg 20: [io 0xd880-0xd89f]
[ 0.217496] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[ 0.217527] pci 0000:00:1d.7: reg 10: [mem 0xf7db7c00-0xf7db7fff]
[ 0.217627] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.217636] pci 0000:00:1d.7: PME# disabled
[ 0.217666] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.217763] pci 0000:00:1f.0: [8086:27b9] type 0 class 0x000601
[ 0.217876] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.217885] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.217893] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0380 (mask 0003)
[ 0.217901] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007)
[ 0.217909] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0007)
[ 0.217969] pci 0000:00:1f.2: [8086:27c5] type 0 class 0x000106
[ 0.217998] pci 0000:00:1f.2: reg 10: [io 0xd080-0xd087]
[ 0.218014] pci 0000:00:1f.2: reg 14: [io 0xd000-0xd003]
[ 0.218030] pci 0000:00:1f.2: reg 18: [io 0xcc00-0xcc07]
[ 0.218047] pci 0000:00:1f.2: reg 1c: [io 0xc880-0xc883]
[ 0.218063] pci 0000:00:1f.2: reg 20: [io 0xc800-0xc80f]
[ 0.218079] pci 0000:00:1f.2: reg 24: [mem 0xf7db7800-0xf7db7bff]
[ 0.218128] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.218136] pci 0000:00:1f.2: PME# disabled
[ 0.218223] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
[ 0.218232] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.218241] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.218254] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.218351] pci 0000:02:00.0: [168c:002b] type 0 class 0x000280
[ 0.218387] pci 0000:02:00.0: reg 10: [mem 0xfbff0000-0xfbffffff 64bit]
[ 0.218510] pci 0000:02:00.0: supports D1
[ 0.218515] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.218525] pci 0000:02:00.0: PME# disabled
[ 0.224146] pci 0000:00:1c.1: PCI bridge to [bus 02-03]
[ 0.224156] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
[ 0.224165] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.224178] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf6ffffff 64bit pref]
[ 0.224280] pci 0000:01:00.0: [1969:1062] type 0 class 0x000200
[ 0.224318] pci 0000:01:00.0: reg 10: [mem 0xf7fc0000-0xf7ffffff 64bit]
[ 0.224339] pci 0000:01:00.0: reg 18: [io 0xec00-0xec7f]
[ 0.224455] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.224464] pci 0000:01:00.0: PME# disabled
[ 0.232058] pci 0000:00:1c.3: PCI bridge to [bus 01-01]
[ 0.232068] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 0.232077] pci 0000:00:1c.3: bridge window [mem 0xf7f00000-0xf7ffffff]
[ 0.232090] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.232186] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.232195] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.232204] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.232216] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.232223] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.232230] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.232237] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.232244] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.232251] pci 0000:00:1e.0: bridge window [mem 0x7f800000-0xffffffff] (subtractive decode)
[ 0.232284] pci_bus 0000:00: on NUMA node 0
[ 0.232295] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.232598] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.232663] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 0.232800] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.252066] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.252222] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.252366] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.252508] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.252651] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.252795] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.252940] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.253082] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.253171] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.253171] vgaarb: loaded
[ 0.253171] SCSI subsystem initialized
[ 0.253171] libata version 3.00 loaded.
[ 0.253171] usbcore: registered new interface driver usbfs
[ 0.253171] usbcore: registered new interface driver hub
[ 0.253171] usbcore: registered new device driver usb
[ 0.253171] wmi: Mapper loaded
[ 0.253171] PCI: Using ACPI for IRQ routing
[ 0.253171] PCI: pci_cache_line_size set to 64 bytes
[ 0.253171] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.253171] reserve RAM buffer: 000000007f7a0000 - 000000007fffffff
[ 0.256142] NET: Registered protocol family 8
[ 0.256142] NET: Registered protocol family 20
[ 0.256142] NetLabel: Initializing
[ 0.256142] NetLabel: domain hash size = 128
[ 0.256142] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.256142] NetLabel: unlabeled traffic allowed by default
[ 0.256145] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.256145] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.256145] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.260099] Switching to clocksource hpet
[ 0.264449] pnp: PnP ACPI init
[ 0.264499] ACPI: bus type pnp registered
[ 0.264757] pnp 00:00: [bus 00-ff]
[ 0.264764] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.264770] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.264776] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.264783] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.264789] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.264795] pnp 00:00: [mem 0x7f800000-0xffffffff window]
[ 0.265049] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.265084] pnp 00:01: [mem 0xfed13000-0xfed19fff]
[ 0.265262] system 00:01: [mem 0xfed13000-0xfed19fff] has been reserved
[ 0.265271] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.265328] pnp 00:02: [dma 4]
[ 0.265333] pnp 00:02: [io 0x0000-0x000f]
[ 0.265339] pnp 00:02: [io 0x0081-0x0083]
[ 0.265344] pnp 00:02: [io 0x0087]
[ 0.265349] pnp 00:02: [io 0x0089-0x008b]
[ 0.265354] pnp 00:02: [io 0x008f]
[ 0.265359] pnp 00:02: [io 0x00c0-0x00df]
[ 0.265505] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.265541] pnp 00:03: [io 0x0070-0x0071]
[ 0.265559] pnp 00:03: [irq 8]
[ 0.265693] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.265792] pnp 00:04: [io 0x0060]
[ 0.265798] pnp 00:04: [io 0x0064]
[ 0.265810] pnp 00:04: [irq 1]
[ 0.265958] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.266053] pnp 00:05: [irq 12]
[ 0.266197] pnp 00:05: Plug and Play ACPI device, IDs SYN0a13 SYN0a00 SYN0002 PNP0f13 (active)
[ 0.266229] pnp 00:06: [io 0x0061]
[ 0.266362] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.266393] pnp 00:07: [io 0x00f0-0x00ff]
[ 0.266405] pnp 00:07: [irq 13]
[ 0.266543] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.266894] pnp 00:08: [io 0x0010-0x001f]
[ 0.266901] pnp 00:08: [io 0x0022-0x003f]
[ 0.266907] pnp 00:08: [io 0x0044-0x004d]
[ 0.266912] pnp 00:08: [io 0x0050-0x005e]
[ 0.266917] pnp 00:08: [io 0x0063]
[ 0.266922] pnp 00:08: [io 0x0065]
[ 0.266927] pnp 00:08: [io 0x0067-0x006f]
[ 0.266932] pnp 00:08: [io 0x0072-0x007f]
[ 0.266937] pnp 00:08: [io 0x0080]
[ 0.266942] pnp 00:08: [io 0x0084-0x0086]
[ 0.266947] pnp 00:08: [io 0x0088]
[ 0.266952] pnp 00:08: [io 0x008c-0x008e]
[ 0.266961] pnp 00:08: [io 0x0090-0x009f]
[ 0.266966] pnp 00:08: [io 0x00a2-0x00bf]
[ 0.266971] pnp 00:08: [io 0x00e0-0x00ef]
[ 0.266976] pnp 00:08: [io 0x025c-0x025f]
[ 0.266982] pnp 00:08: [io 0x0380-0x0383]
[ 0.266987] pnp 00:08: [io 0x0400-0x041f]
[ 0.266992] pnp 00:08: [io 0x04d0-0x04d1]
[ 0.266997] pnp 00:08: [io 0x0800-0x087f]
[ 0.267003] pnp 00:08: [io 0x0400-0x03ff disabled]
[ 0.267008] pnp 00:08: [io 0x0480-0x04bf]
[ 0.267014] pnp 00:08: [mem 0x8c000000-0x8c01ffff]
[ 0.267020] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
[ 0.267025] pnp 00:08: [mem 0xfed20000-0xfed3ffff]
[ 0.267031] pnp 00:08: [mem 0xfed50000-0xfed8ffff]
[ 0.267036] pnp 00:08: [mem 0xffb00000-0xffbfffff]
[ 0.267042] pnp 00:08: [mem 0xfff00000-0xffffffff]
[ 0.267286] system 00:08: [io 0x025c-0x025f] has been reserved
[ 0.267294] system 00:08: [io 0x0380-0x0383] has been reserved
[ 0.267301] system 00:08: [io 0x0400-0x041f] has been reserved
[ 0.267308] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.267315] system 00:08: [io 0x0800-0x087f] has been reserved
[ 0.267322] system 00:08: [io 0x0480-0x04bf] has been reserved
[ 0.267331] system 00:08: [mem 0x8c000000-0x8c01ffff] has been reserved
[ 0.267339] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.267346] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.267354] system 00:08: [mem 0xfed50000-0xfed8ffff] has been reserved
[ 0.267361] system 00:08: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.267369] system 00:08: [mem 0xfff00000-0xffffffff] could not be reserved
[ 0.267377] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.267561] pnp 00:09: [mem 0xfed00000-0xfed003ff]
[ 0.267708] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.267868] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
[ 0.267875] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
[ 0.268100] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.268109] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.268117] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.268233] pnp 00:0b: [mem 0xe0000000-0xe3ffffff]
[ 0.268412] system 00:0b: [mem 0xe0000000-0xe3ffffff] has been reserved
[ 0.268421] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.269091] pnp 00:0c: [mem 0x00000000-0x0009ffff]
[ 0.269098] pnp 00:0c: [mem 0x000c0000-0x000cffff]
[ 0.269104] pnp 00:0c: [mem 0x000e0000-0x000fffff]
[ 0.269110] pnp 00:0c: [mem 0x00100000-0x7f7fffff]
[ 0.269116] pnp 00:0c: [mem 0x00000000-0xffffffff disabled]
[ 0.269345] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.269353] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.269360] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.269368] system 00:0c: [mem 0x00100000-0x7f7fffff] could not be reserved
[ 0.269376] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.269941] pnp: PnP ACPI: found 13 devices
[ 0.269946] ACPI: ACPI bus type pnp unregistered
[ 0.315788] pci 0000:00:1c.0: BAR 8: assigned [mem 0x7f800000-0x7f9fffff]
[ 0.315800] pci 0000:00:1c.0: BAR 9: assigned [mem 0x7fa00000-0x7fbfffff 64bit pref]
[ 0.315810] pci 0000:00:1c.3: BAR 9: assigned [mem 0x7fc00000-0x7fdfffff 64bit pref]
[ 0.315819] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff]
[ 0.315827] pci 0000:00:1c.1: BAR 7: assigned [io 0x2000-0x2fff]
[ 0.315833] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
[ 0.315840] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.315851] pci 0000:00:1c.0: bridge window [mem 0x7f800000-0x7f9fffff]
[ 0.315861] pci 0000:00:1c.0: bridge window [mem 0x7fa00000-0x7fbfffff 64bit pref]
[ 0.315873] pci 0000:00:1c.1: PCI bridge to [bus 02-03]
[ 0.315880] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.315891] pci 0000:00:1c.1: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.315900] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf6ffffff 64bit pref]
[ 0.315913] pci 0000:00:1c.3: PCI bridge to [bus 01-01]
[ 0.315920] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 0.315930] pci 0000:00:1c.3: bridge window [mem 0xf7f00000-0xf7ffffff]
[ 0.315939] pci 0000:00:1c.3: bridge window [mem 0x7fc00000-0x7fdfffff 64bit pref]
[ 0.315952] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 0.315957] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.315966] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.315974] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.315997] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.316043] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.316056] pci 0000:00:1c.0: setting latency timer to 64
[ 0.316073] pci 0000:00:1c.1: enabling device (0106 -> 0107)
[ 0.316090] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.316100] pci 0000:00:1c.1: setting latency timer to 64
[ 0.316117] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.316126] pci 0000:00:1c.3: setting latency timer to 64
[ 0.316140] pci 0000:00:1e.0: setting latency timer to 64
[ 0.316149] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.316155] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.316161] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.316167] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.316173] pci_bus 0000:00: resource 8 [mem 0x7f800000-0xffffffff]
[ 0.316180] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
[ 0.316186] pci_bus 0000:04: resource 1 [mem 0x7f800000-0x7f9fffff]
[ 0.316193] pci_bus 0000:04: resource 2 [mem 0x7fa00000-0x7fbfffff 64bit pref]
[ 0.316199] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.316205] pci_bus 0000:02: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.316212] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf6ffffff 64bit pref]
[ 0.316218] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.316224] pci_bus 0000:01: resource 1 [mem 0xf7f00000-0xf7ffffff]
[ 0.316231] pci_bus 0000:01: resource 2 [mem 0x7fc00000-0x7fdfffff 64bit pref]
[ 0.316238] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.316244] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.316250] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.316256] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.316262] pci_bus 0000:05: resource 8 [mem 0x7f800000-0xffffffff]
[ 0.316352] NET: Registered protocol family 2
[ 0.316488] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.317007] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.317923] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.318337] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.318344] TCP reno registered
[ 0.318353] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.318371] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.318615] NET: Registered protocol family 1
[ 0.318654] pci 0000:00:02.0: Boot video device
[ 0.318815] PCI: CLS 32 bytes, default 64
[ 0.318932] Trying to unpack rootfs image as initramfs...
[ 1.204628] Freeing initrd memory: 18460k freed
[ 1.223481] audit: initializing netlink socket (disabled)
[ 1.223505] type=2000 audit(1297928154.216:1): initialized
[ 1.224394] highmem bounce pool size: 64 pages
[ 1.224405] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.232794] VFS: Disk quotas dquot_6.5.2
[ 1.233038] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.235209] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.235406] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 1.235721] fuse init (API version 7.16)
[ 1.236314] msgmni has been set to 1729
[ 1.237044] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.237051] io scheduler noop registered
[ 1.237095] io scheduler cfq registered (default)
[ 1.237304] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.237374] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 1.237570] pcieport 0000:00:1c.1: setting latency timer to 64
[ 1.237633] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 1.237824] pcieport 0000:00:1c.3: setting latency timer to 64
[ 1.237887] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[ 1.238393] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.238663] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.238669] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.239504] intel_idle: MWAIT substates: 0x20220
[ 1.239520] intel_idle: v0.4 model 0x1C
[ 1.239525] intel_idle: lapic_timer_reliable_states 0x2
[ 1.239541] Marking TSC unstable due to TSC halts in idle states deeper than C2
[ 1.239946] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.240187] ACPI: AC Adapter [AC0] (on-line)
[ 1.240627] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 1.245337] ACPI: Lid Switch [LID]
[ 1.245616] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 1.245627] ACPI: Sleep Button [SLPB]
[ 1.245838] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 1.245847] ACPI: Power Button [PWRB]
[ 1.246064] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.246073] ACPI: Power Button [PWRF]
[ 1.246754] ACPI: acpi_idle yielding to intel_idle
[ 1.261367] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.261374] ACPI: Thermal Zone [TZ00] (52 C)
[ 1.262856] Linux agpgart interface v0.103
[ 1.263021] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[ 1.263171] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 1.263321] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 1.263671] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.263894] [drm] Initialized drm 1.1.0 20060810
[ 1.263936] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.263944] i915 0000:00:02.0: setting latency timer to 64
[ 1.303601] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.303608] [drm] Driver supports precise vblank timestamp query.
[ 1.307576] [drm:parse_general_definitions], crt_ddc_bus_pin: 2
[ 1.307610] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
[ 1.307617] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x600" 0 51100 1024 1117 1152 1250 600 601 606 680 0x8 0xa
[ 1.307689] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
[ 1.307695] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[ 1.307709] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
[ 1.307751] [drm:intel_dsm_pci_probe], no _DSM method for intel device
[ 1.307773] [drm:intel_modeset_init], 2 display pipes available.
[ 1.307786] [drm:intel_crtc_init], swapping pipes & planes for FBC
[ 1.344860] [drm:intel_crtc_init], swapping pipes & planes for FBC
[ 1.398734] [drm:intel_tv_init], Integrated TV is not present.
[ 1.398748] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.399177] [drm] initialized overlay support
[ 1.400851] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.400867] ACPI: Battery Slot [BAT0] (battery present)
[ 1.652037] [drm:i915_get_vblank_timestamp], crtc 0 is disabled
[ 1.708024] [drm:intel_wait_for_vblank], vblank wait timed out
[ 1.712994] [drm:intel_update_fbc],
[ 1.713000] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[ 1.713007] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[ 1.713014] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 29
[ 1.713020] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
[ 1.713027] [drm:i9xx_update_wm], memory self refresh disabled
[ 1.713039] [drm:i915_get_vblank_timestamp], crtc 1 is disabled
[ 1.768022] [drm:intel_wait_for_vblank], vblank wait timed out
[ 1.772991] [drm:intel_update_fbc],
[ 1.772996] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[ 1.773003] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[ 1.773009] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 29
[ 1.773015] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
[ 1.773022] [drm:i9xx_update_wm], memory self refresh disabled
[ 1.773033] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 1.773054] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 1.773061] [drm:drm_mode_debug_printmodeline], Modeline 13:"1024x600" 60 51000 1024 1117 1152 1250 600 601 606 680 0x48 0xa
[ 1.773074] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 1.788023] [drm:intel_crt_detect], CRT not detected via hotplug
[ 1.788030] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 1.788037] [drm:drm_setup_crtcs],
[ 1.788043] [drm:drm_enable_connectors], connector 5 enabled? yes
[ 1.788049] [drm:drm_enable_connectors], connector 11 enabled? no
[ 1.788054] [drm:drm_target_preferred], looking for cmdline mode on connector 5
[ 1.788061] [drm:drm_target_preferred], looking for preferred mode on connector 5
[ 1.788067] [drm:drm_target_preferred], found mode 1024x600
[ 1.788072] [drm:drm_setup_crtcs], picking CRTCs for 4096x4096 config
[ 1.788080] [drm:drm_setup_crtcs], desired mode 1024x600 set on crtc 4
[ 1.793039] [drm:intelfb_create], allocated 1024x600 fb: 0x00020000, bo f449d700
[ 1.793478] [drm:drm_crtc_helper_set_config],
[ 1.793483] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB]
[ 1.793495] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[ 1.793501] [drm:drm_crtc_helper_set_config],
[ 1.793505] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:14] #connectors=1 (x y) (0 0)
[ 1.793516] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
[ 1.793520] [drm:drm_crtc_helper_set_config], modes are different, full mode set
[ 1.793525] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 1.793534] [drm:drm_mode_debug_printmodeline], Modeline 8:"1024x600" 60 51000 1024 1117 1152 1250 600 601 606 680 0x48 0xa
[ 1.793545] [drm:drm_crtc_helper_set_config], encoder changed, full mode switch
[ 1.793549] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch
[ 1.793555] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 1.793561] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[ 1.793565] [drm:drm_mode_debug_printmodeline], Modeline 8:"1024x600" 60 51000 1024 1117 1152 1250 600 601 606 680 0x48 0xa
[ 1.793581] [drm:drm_crtc_helper_set_mode], [CRTC:4]
[ 1.793591] [drm:intel_crtc_mode_set], using SSC reference clock of 100 MHz
[ 1.793992] [drm:intel_crtc_mode_set], Mode for pipe B:
[ 1.793996] [drm:drm_mode_debug_printmodeline], Modeline 8:"1024x600" 60 51000 1024 1117 1152 1250 600 601 606 680 0x48 0xa
[ 1.832027] [drm:intel_pipe_set_base_atomic], Writing base 00020000 00000000 0 0 4096
[ 1.832036] [drm:intel_update_fbc],
[ 1.832041] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[ 1.832047] [drm:intel_calculate_wm], FIFO entries required for mode: 16
[ 1.832052] [drm:intel_calculate_wm], FIFO watermark level: 10
[ 1.832056] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[ 1.832062] [drm:i9xx_update_wm], FIFO watermarks - A: 10, B: 29
[ 1.832067] [drm:i9xx_update_wm], self-refresh entries: 64
[ 1.832072] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 10, B: 29, C: 2, SR 63
[ 1.832078] [drm:i9xx_update_wm], memory self refresh enabled
[ 1.832083] [drm:drm_crtc_helper_set_mode], [ENCODER:6:LVDS-6] set [MODE:8:1024x600]
[ 1.832090] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[ 1.832095] [drm:intel_calculate_wm], FIFO entries required for mode: 16
[ 1.832100] [drm:intel_calculate_wm], FIFO watermark level: 10
[ 1.832105] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[ 1.832110] [drm:i9xx_update_wm], FIFO watermarks - A: 10, B: 29
[ 1.832115] [drm:i9xx_update_wm], self-refresh entries: 64
[ 1.832119] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 10, B: 29, C: 2, SR 63
[ 1.832126] [drm:i9xx_update_wm], memory self refresh enabled
[ 1.864059] [drm:intel_update_fbc],
[ 1.864065] [drm:intel_lvds_enable], applying panel-fitter: 0, 0
[ 1.864077] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[ 1.864083] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] set DPMS on
[ 1.864159] [drm:drm_crtc_helper_set_config],
[ 1.864163] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:14] #connectors=1 (x y) (0 0)
[ 1.864176] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 1.864181] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[ 1.864186] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] set DPMS on
[ 1.870886] Console: switching to colour frame buffer device 128x37
[ 1.870899] [drm:drm_crtc_helper_set_config],
[ 1.870902] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:14] #connectors=1 (x y) (0 0)
[ 1.870915] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 1.870921] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[ 1.870926] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] set DPMS on
[ 1.877657] fb0: inteldrmfb frame buffer device
[ 1.877661] drm: registered panic notifier
[ 1.878026] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1.883905] brd: module loaded
[ 1.886790] loop: module loaded
[ 1.887174] ahci 0000:00:1f.2: version 3.0
[ 1.887211] ahci 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 1.887278] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 1.887384] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
[ 1.887393] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 1.887402] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.889639] scsi0 : ahci
[ 1.890024] scsi1 : ahci
[ 1.890335] scsi2 : ahci
[ 1.890648] scsi3 : ahci
[ 1.891361] ata1: SATA max UDMA/133 abar m1024@0xf7db7800 port 0xf7db7900 irq 43
[ 1.891367] ata2: DUMMY
[ 1.891371] ata3: DUMMY
[ 1.891374] ata4: DUMMY
[ 1.891969] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.892055] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.892090] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.892098] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.892303] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.916240] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 1.916260] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.920144] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.920178] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7db7c00
[ 1.936033] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.936082] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.936089] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.936095] usb usb1: Product: EHCI Host Controller
[ 1.936100] usb usb1: Manufacturer: Linux 2.6.38-rc2-00079-g4a1dc3f ehci_hcd
[ 1.936106] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.936547] hub 1-0:1.0: USB hub found
[ 1.936558] hub 1-0:1.0: 8 ports detected
[ 1.936904] usbcore: registered new interface driver uas
[ 1.937104] usbcore: registered new interface driver usbserial
[ 1.937190] USB Serial support registered for generic
[ 1.937290] usbcore: registered new interface driver usbserial_generic
[ 1.937295] usbserial: USB Serial Driver core
[ 1.937538] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.967610] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.967625] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.968334] mousedev: PS/2 mouse device common for all mice
[ 1.969069] rtc_cmos 00:03: RTC can wake from S4
[ 1.991788] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.993155] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.993201] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 1.994250] cpuidle: using governor ladder
[ 1.995522] cpuidle: using governor menu
[ 1.998447] usbcore: registered new interface driver usbhid
[ 1.998452] usbhid: USB HID core driver
[ 1.999757] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input5
[ 2.027453] Registered led device: eeepc::touchpad
[ 2.208050] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.209823] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.210198] ata1.00: ATA-8: ST9160314AS, 0002SDM1, max UDMA/133
[ 2.210205] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.212414] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.212739] ata1.00: configured for UDMA/133
[ 2.212992] scsi 0:0:0:0: Direct-Access ATA ST9160314AS 0002 PQ: 0 ANSI: 5
[ 2.213581] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.213771] sd 0:0:0:0: [sda] Write Protect is off
[ 2.213781] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.213864] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.213961] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.248050] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 2.278031] sda: sda1 sda2 < sda5 sda6 sda7 > sda4
[ 2.279703] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.458108] usb 1-2: New USB device found, idVendor=13d3, idProduct=5071
[ 2.458116] usb 1-2: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[ 2.458122] usb 1-2: Product: USB2.0 UVC 1.3M WebCam
[ 2.458128] usb 1-2: Manufacturer: GenesysLogic Technology Co., Ltd.
[ 2.576033] usb 1-3: new high speed USB device using ehci_hcd and address 3
[ 2.709470] usb 1-3: New USB device found, idVendor=058f, idProduct=6335
[ 2.709478] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.709484] usb 1-3: Product: Mass Storage Device
[ 2.709489] usb 1-3: Manufacturer: Generic
[ 2.709493] usb 1-3: SerialNumber: 058F63356336
[ 2.820054] hub 1-0:1.0: unable to enumerate USB device on port 7
[ 3.242364] TCP cubic registered
[ 3.243158] NET: Registered protocol family 10
[ 3.244372] NET: Registered protocol family 17
[ 3.244439] Registering the dns_resolver key type
[ 3.245367] Using IPI No-Shortcut mode
[ 3.245898] PM: Hibernation image not present or could not be loaded.
[ 3.245914] registered taskstats version 1
[ 3.246370] rtc_cmos 00:03: setting system clock to 2011-02-17 07:35:57 UTC (1297928157)
[ 3.246544] Freeing unused kernel memory: 360k freed
[ 3.246860] Write protecting the kernel text: 3436k
[ 3.246913] Write protecting the kernel read-only data: 1328k
[ 3.333532] udev[889]: starting version 165
[ 3.429005] [drm:drm_crtc_helper_set_config],
[ 3.429014] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:14] #connectors=1 (x y) (0 0)
[ 3.429039] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 3.429047] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[ 3.429055] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] set DPMS on
[ 3.856269] [drm:drm_crtc_helper_set_config],
[ 3.856277] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB]
[ 3.856292] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 3.856299] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[ 3.856306] [drm:drm_crtc_helper_set_config],
[ 3.856310] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:14] #connectors=1 (x y) (0 0)
[ 3.856324] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 3.856331] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[ 3.856337] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] set DPMS on
[ 3.856384] [drm:drm_crtc_helper_set_config],
[ 3.856389] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB]
[ 3.856401] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 3.856407] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[ 3.856413] [drm:drm_crtc_helper_set_config],
[ 3.856417] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:14] #connectors=1 (x y) (0 0)
[ 3.856430] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 3.856436] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[ 3.856443] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] set DPMS on
[ 3.856663] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
[ 3.856674] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
[ 3.856692] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 3.856700] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 3.856723] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 3.856731] [drm:drm_mode_debug_printmodeline], Modeline 13:"1024x600" 60 51000 1024 1117 1152 1250 600 601 606 680 0x48 0xa
[ 3.856746] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 3.865337] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 3.865352] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 3.880032] [drm:intel_crt_detect], CRT not detected via hotplug
[ 3.880042] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 3.880061] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 3.880069] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 3.896041] [drm:intel_crt_detect], CRT not detected via hotplug
[ 3.896051] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 3.981766] [drm:drm_mode_addfb], [FB:15]
[ 3.981814] [drm:drm_mode_setcrtc], [CRTC:4]
[ 3.981827] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1]
[ 3.981833] [drm:drm_crtc_helper_set_config],
[ 3.981838] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:15] #connectors=1 (x y) (0 0)
[ 3.981855] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 3.986823] [drm:intel_pipe_set_base_atomic], Writing base 00280000 00000000 0 0 4096
[ 3.986835] [drm:intel_update_fbc],
[ 4.000028] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[ 4.000036] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] set DPMS on
[ 4.000086] [drm:drm_crtc_helper_set_config],
[ 4.000091] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:14] #connectors=1 (x y) (0 0)
[ 4.000107] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 4.000115] [drm:intel_pipe_set_base_atomic], Writing base 00020000 00000000 0 0 4096
[ 4.000122] [drm:intel_update_fbc],
[ 4.016076] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[ 4.016088] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] set DPMS on
[ 4.024952] [drm:drm_mode_setcrtc], [CRTC:4]
[ 4.024967] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1]
[ 4.024974] [drm:drm_crtc_helper_set_config],
[ 4.024979] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:15] #connectors=1 (x y) (0 0)
[ 4.024995] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 4.025007] [drm:intel_pipe_set_base_atomic], Writing base 00280000 00000000 0 0 4096
[ 4.025016] [drm:intel_update_fbc],
[ 4.032059] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[ 4.032072] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] set DPMS on
[ 4.241883] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 6.995133] Adding 4160796k swap on /dev/sda7. Priority:-1 extents:1 across:4160796k
[ 8.142385] udev[1183]: starting version 167
[ 8.783988] atl1c 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 8.795239] uhci_hcd: USB Universal Host Controller Interface driver
[ 8.795363] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 8.795385] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 8.795395] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 8.795613] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 8.819579] Linux video capture interface: v2.00
[ 8.836372] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
[ 8.836496] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 8.836506] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.836514] usb usb2: Product: UHCI Host Controller
[ 8.836521] usb usb2: Manufacturer: Linux 2.6.38-rc2-00079-g4a1dc3f uhci_hcd
[ 8.836529] usb usb2: SerialNumber: 0000:00:1d.0
[ 8.836955] hub 2-0:1.0: USB hub found
[ 8.836974] hub 2-0:1.0: 2 ports detected
[ 8.837207] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 8.837228] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 8.837238] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 8.838052] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 8.856260] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480
[ 8.856380] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 8.856390] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.856398] usb usb3: Product: UHCI Host Controller
[ 8.856405] usb usb3: Manufacturer: Linux 2.6.38-rc2-00079-g4a1dc3f uhci_hcd
[ 8.856413] usb usb3: SerialNumber: 0000:00:1d.1
[ 8.856845] hub 3-0:1.0: USB hub found
[ 8.856862] hub 3-0:1.0: 2 ports detected
[ 8.857054] atl1c 0000:01:00.0: setting latency timer to 64
[ 8.857087] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 8.857105] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 8.857114] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 8.857318] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 8.872464] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
[ 8.872589] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 8.872599] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.872609] usb usb4: Product: UHCI Host Controller
[ 8.872616] usb usb4: Manufacturer: Linux 2.6.38-rc2-00079-g4a1dc3f uhci_hcd
[ 8.872624] usb usb4: SerialNumber: 0000:00:1d.2
[ 8.873067] hub 4-0:1.0: USB hub found
[ 8.873082] hub 4-0:1.0: 2 ports detected
[ 8.873309] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 8.873331] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 8.873341] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 8.873539] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 8.893531] Initializing USB Mass Storage driver...
[ 8.896099] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880
[ 8.896220] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 8.896231] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.896239] usb usb5: Product: UHCI Host Controller
[ 8.896247] usb usb5: Manufacturer: Linux 2.6.38-rc2-00079-g4a1dc3f uhci_hcd
[ 8.896254] usb usb5: SerialNumber: 0000:00:1d.3
[ 8.896735] hub 5-0:1.0: USB hub found
[ 8.896752] hub 5-0:1.0: 2 ports detected
[ 8.923951] scsi4 : usb-storage 1-3:1.0
[ 8.939035] intel_rng: FWH not detected
[ 8.970257] usbcore: registered new interface driver usb-storage
[ 8.970265] USB Mass Storage support registered.
[ 8.980443] cfg80211: Calling CRDA to update world regulatory domain
[ 9.005699] atl1c 0000:01:00.0: version 1.0.1.0-NAPI
[ 9.025077] uvcvideo: Found UVC 1.00 device USB2.0 UVC 1.3M WebCam (13d3:5071)
[ 9.040657] input: USB2.0 UVC 1.3M WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/input/input6
[ 9.040892] usbcore: registered new interface driver uvcvideo
[ 9.040899] USB Video Class driver (v1.0.0)
[ 9.892492] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 9.892515] ath9k 0000:02:00.0: setting latency timer to 64
[ 9.944042] ath: EEPROM regdomain: 0x60
[ 9.944049] ath: EEPROM indicates we should expect a direct regpair map
[ 9.944058] ath: Country alpha2 being used: 00
[ 9.944062] ath: Regpair used: 0x60
[ 9.970778] scsi 4:0:0:0: Direct-Access Single Flash Reader 1.00 PQ: 0 ANSI: 0
[ 9.977489] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 10.128053] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1a0b1, caps: 0xd04733/0xa40000/0xa0000
[ 10.218558] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 10.238271] cfg80211: World regulatory domain updated:
[ 10.238279] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 10.238287] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.238293] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.238300] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.238306] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.238313] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.623595] sd 4:0:0:0: [sdb] 3907584 512-byte logical blocks: (2.00 GB/1.86 GiB)
[ 10.624343] sd 4:0:0:0: [sdb] Write Protect is off
[ 10.624351] sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 10.625083] sd 4:0:0:0: [sdb] No Caching mode page present
[ 10.625091] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 10.628707] sd 4:0:0:0: [sdb] No Caching mode page present
[ 10.628717] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 10.630362] sdb: sdb1
[ 10.634349] sd 4:0:0:0: [sdb] No Caching mode page present
[ 10.634362] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 10.634372] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 10.696108] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 10.698198] Registered led device: ath9k-phy0::radio
[ 10.698298] Registered led device: ath9k-phy0::assoc
[ 10.698386] Registered led device: ath9k-phy0::tx
[ 10.698480] Registered led device: ath9k-phy0::rx
[ 10.698505] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8900000, irq=17
[ 11.430224] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 11.430328] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 11.430385] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 11.560366] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 11.560759] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 11.920044] [drm:intel_crt_detect], CRT not detected via hotplug
[ 11.920060] [drm:output_poll_execute], [CONNECTOR:11:VGA-1] status updated from 2 to 2
[ 12.184846] device-mapper: uevent: version 1.0.3
[ 12.187333] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[ 12.611441] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 12.813257] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 17.827823] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 17.843584] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X
[ 17.843733] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 19.485183] atl1c 0000:01:00.0: irq 45 for MSI/MSI-X
[ 19.485268] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 19.952179] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
[ 19.952193] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[2] ENCODERS[2]
[ 19.952335] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 19.952344] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 19.952369] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 19.952376] [drm:drm_mode_debug_printmodeline], Modeline 13:"1024x600" 60 51000 1024 1117 1152 1250 600 601 606 680 0x48 0xa
[ 19.952393] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 19.952625] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 19.952635] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 19.968061] [drm:intel_crt_detect], CRT not detected via hotplug
[ 19.968072] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 19.968091] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 19.968098] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 19.984055] [drm:intel_crt_detect], CRT not detected via hotplug
[ 19.984073] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 19.984469] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 19.984489] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 19.984534] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 19.984550] [drm:drm_mode_debug_printmodeline], Modeline 13:"1024x600" 60 51000 1024 1117 1152 1250 600 601 606 680 0x48 0xa
[ 19.984588] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 19.989671] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 19.989683] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 20.004112] [drm:intel_crt_detect], CRT not detected via hotplug
[ 20.004124] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 20.004150] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 20.004161] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 20.020075] [drm:intel_crt_detect], CRT not detected via hotplug
[ 20.020087] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 20.234427] [drm:drm_mode_addfb], [FB:18]
[ 20.234670] [drm:drm_mode_setcrtc], [CRTC:4]
[ 20.234683] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1]
[ 20.234689] [drm:drm_crtc_helper_set_config],
[ 20.234694] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:18] #connectors=1 (x y) (0 0)
[ 20.234710] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[ 20.236625] [drm:intel_pipe_set_base_atomic], Writing base 00800000 00000000 0 0 4096
[ 20.236640] [drm:intel_update_fbc],
[ 20.244041] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[ 20.244051] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] set DPMS on
[ 21.187526] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[ 21.363997] EXT4-fs (sda6): re-mounted. Opts: commit=0
[ 25.007619] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 25.007632] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 25.007658] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 25.007665] [drm:drm_mode_debug_printmodeline], Modeline 13:"1024x600" 60 51000 1024 1117 1152 1250 600 601 606 680 0x48 0xa
[ 25.007682] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 25.008589] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 25.008604] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 25.024052] [drm:intel_crt_detect], CRT not detected via hotplug
[ 25.024066] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 25.024091] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 25.024102] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 25.040062] [drm:intel_crt_detect], CRT not detected via hotplug
[ 25.040076] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 25.045852] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 25.045870] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 25.045907] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 25.045919] [drm:drm_mode_debug_printmodeline], Modeline 13:"1024x600" 60 51000 1024 1117 1152 1250 600 601 606 680 0x48 0xa
[ 25.045946] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 25.047063] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 25.047078] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 25.060044] [drm:intel_crt_detect], CRT not detected via hotplug
[ 25.060058] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 25.060083] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 25.060095] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 25.076060] [drm:intel_crt_detect], CRT not detected via hotplug
[ 25.076074] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 25.110463] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 25.110482] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 25.110519] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 25.110532] [drm:drm_mode_debug_printmodeline], Modeline 13:"1024x600" 60 51000 1024 1117 1152 1250 600 601 606 680 0x48 0xa
[ 25.110560] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 25.111626] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 25.111641] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 25.124069] [drm:intel_crt_detect], CRT not detected via hotplug
[ 25.124084] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 25.124108] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 25.124120] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 25.140058] [drm:intel_crt_detect], CRT not detected via hotplug
[ 25.140072] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 25.143244] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 25.143262] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 25.143297] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 25.143309] [drm:drm_mode_debug_printmodeline], Modeline 13:"1024x600" 60 51000 1024 1117 1152 1250 600 601 606 680 0x48 0xa
[ 25.143338] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 25.144699] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 25.144721] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 25.160067] [drm:intel_crt_detect], CRT not detected via hotplug
[ 25.160081] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 25.160105] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 25.160117] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 25.176058] [drm:intel_crt_detect], CRT not detected via hotplug
[ 25.176072] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 26.443134] [drm:intel_crtc_cursor_set],
[ 27.852049] [drm:intel_crt_detect], CRT not detected via hotplug
[ 28.384023] eth0: no IPv6 routers present
[ 28.866754] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[ 28.872873] EXT4-fs (sda6): re-mounted. Opts: commit=0
[ 30.000039] [drm:intel_crt_detect], CRT not detected via hotplug
[ 30.000049] [drm:output_poll_execute], [CONNECTOR:11:VGA-1] status updated from 2 to 2
[ 40.256707] [drm:intel_crtc_cursor_set],
[ 40.256723] [drm:intel_crtc_cursor_set], cursor off
[ 40.611990] [drm:intel_crtc_cursor_set],
[ 44.097328] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 44.097344] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 44.097380] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 44.097391] [drm:drm_mode_debug_printmodeline], Modeline 13:"1024x600" 60 51000 1024 1117 1152 1250 600 601 606 680 0x48 0xa
[ 44.097418] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 44.098508] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 44.098525] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 44.112033] [drm:intel_crt_detect], CRT not detected via hotplug
[ 44.112047] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 44.112073] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 44.112084] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 44.128030] [drm:intel_crt_detect], CRT not detected via hotplug
[ 44.128042] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 44.131667] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 44.131679] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 44.131705] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 44.131712] [drm:drm_mode_debug_printmodeline], Modeline 13:"1024x600" 60 51000 1024 1117 1152 1250 600 601 606 680 0x48 0xa
[ 44.131729] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 44.133075] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 44.133086] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 44.148048] [drm:intel_crt_detect], CRT not detected via hotplug
[ 44.148064] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 44.148093] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 44.148104] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 44.164047] [drm:intel_crt_detect], CRT not detected via hotplug
[ 44.164067] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 44.167822] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 44.167841] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 44.167878] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 44.167890] [drm:drm_mode_debug_printmodeline], Modeline 13:"1024x600" 60 51000 1024 1117 1152 1250 600 601 606 680 0x48 0xa
[ 44.167918] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 44.169685] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 44.169703] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 44.184043] [drm:intel_crt_detect], CRT not detected via hotplug
[ 44.184057] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 44.184082] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 44.184094] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 44.200043] [drm:intel_crt_detect], CRT not detected via hotplug
[ 44.200057] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 44.203411] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 44.203429] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 44.203465] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 44.203477] [drm:drm_mode_debug_printmodeline], Modeline 13:"1024x600" 60 51000 1024 1117 1152 1250 600 601 606 680 0x48 0xa
[ 44.203504] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 44.205602] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 44.205620] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 44.220067] [drm:intel_crt_detect], CRT not detected via hotplug
[ 44.220081] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 44.220105] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 44.220116] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 44.236040] [drm:intel_crt_detect], CRT not detected via hotplug
[ 44.236054] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 47.087896] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 47.087913] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 47.087948] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 47.087960] [drm:drm_mode_debug_printmodeline], Modeline 13:"1024x600" 60 51000 1024 1117 1152 1250 600 601 606 680 0x48 0xa
[ 47.087985] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 47.089087] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 47.089105] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 47.104050] [drm:intel_crt_detect], CRT not detected via hotplug
[ 47.104065] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 47.104093] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 47.104104] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 47.120055] [drm:intel_crt_detect], CRT not detected via hotplug
[ 47.120069] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 52.078192] wlan0: authenticate with 00:1c:10:b2:60:74 (try 1)
[ 52.092260] wlan0: authenticated
[ 52.092302] wlan0: associate with 00:1c:10:b2:60:74 (try 1)
[ 52.095198] wlan0: RX AssocResp from 00:1c:10:b2:60:74 (capab=0x11 status=0 aid=1)
[ 52.095204] wlan0: associated
[ 52.095711] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 52.461127] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 52.461143] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[ 52.461176] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[ 52.461186] [drm:drm_mode_debug_printmodeline], Modeline 13:"1024x600" 60 51000 1024 1117 1152 1250 600 601 606 680 0x48 0xa
[ 52.461212] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[ 52.462210] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 52.462225] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 52.479764] [drm:intel_crt_detect], CRT not detected via hotplug
[ 52.479780] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 52.479809] [drm:drm_mode_getconnector], [CONNECTOR:11:?]
[ 52.479821] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1]
[ 52.492062] [drm:intel_crt_detect], CRT not detected via hotplug
[ 52.492077] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected
[ 54.128058] [drm:intel_crt_detect], CRT not detected via hotplug
[ 54.128071] [drm:output_poll_execute], [CONNECTOR:11:VGA-1] status updated from 2 to 2
[ 58.016070] [drm:intel_crt_detect], CRT not detected via hotplug
[ 61.137014] [drm:drm_mode_addfb], [FB:15]
[ 62.512031] wlan0: no IPv6 routers present
[ 63.416252] [drm:drm_mode_addfb], [FB:18]
[ 89.024055] [drm:intel_crt_detect], CRT not detected via hotplug
[-- Attachment #4: reg_dump_bad --]
[-- Type: text/plain, Size: 9159 bytes --]
DCC: 0x000f0400 (single channel, XOR randomization: disabled, XOR bit: 11)
CHDECMISC: 0x22b97428 (XOR bank/rank, ch2 enh disabled, ch1 enh enabled, ch0 enh disabled, flex disabled, ep not present)
C0DRB0: 0x000f0400 (0x0400)
C0DRB1: 0x0000000f (0x000f)
C0DRB2: 0x00000000 (0x0000)
C0DRB3: 0x01180000 (0x0000)
C1DRB0: 0x0e0d0d0c (0x0d0c)
C1DRB1: 0x0f0e0e0d (0x0e0d)
C1DRB2: 0x100f0f0e (0x0f0e)
C1DRB3: 0x0e0d100f (0x100f)
C0DRA01: 0x04020118 (0x0118)
C0DRA23: 0x00000402 (0x0402)
C1DRA01: 0x100f0e0d (0x0e0d)
C1DRA23: 0x1211100f (0x100f)
PGETBL_CTL: 0x7ffc0001
VCLK_DIVISOR_VGA0: 0x00031108 (n = 3, m1 = 17, m2 = 8)
VCLK_DIVISOR_VGA1: 0x00031406 (n = 3, m1 = 20, m2 = 6)
VCLK_POST_DIV: 0x00020002 (vga0 p1 = 4, p2 = 2, vga1 p1 = 2, p2 = 2)
DPLL_TEST: 0x00010001 ()
CACHE_MODE_0: 0x00006820
D_STATE: 0x0000000b
DSPCLK_GATE_D: 0x00001000 (clock gates disabled: DPLUNIT)
RENCLK_GATE_D1: 0x00000000
RENCLK_GATE_D2: 0x00000000
SDVOB: 0x00480000 (disabled, pipe A, stall disabled, not detected)
SDVOC: 0x00480000 (disabled, pipe A, stall disabled, not detected)
SDVOUDI: 0x000000ff
DSPARB: 0x00001d9c
DSPFW1: 0x00000000
DSPFW2: 0x00000000
DSPFW3: 0x00000000
ADPA: 0x40008c18 (disabled, pipe B, +hsync, +vsync)
LVDS: 0xc0300300 (enabled, pipe B, 18 bit, 1 channel)
DVOA: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
DVOB: 0x00480000 (disabled, pipe A, no stall, -hsync, -vsync)
DVOC: 0x00480000 (disabled, pipe A, no stall, -hsync, -vsync)
DVOA_SRCDIM: 0x00000000
DVOB_SRCDIM: 0x00000000
DVOC_SRCDIM: 0x00000000
PP_CONTROL: 0x00000001 (power target: on)
PP_STATUS: 0xc0000008 (on, ready, sequencing idle)
PP_ON_DELAYS: 0x025807d0
PP_OFF_DELAYS: 0x01f407d0
PP_DIVISOR: 0x00251b05
PFIT_CONTROL: 0x00000000
PFIT_PGM_RATIOS: 0x00000000
PORT_HOTPLUG_EN: 0x00000220
PORT_HOTPLUG_STAT: 0x00000000
DSPACNTR: 0xd9000000 (enabled, pipe B)
DSPASTRIDE: 0x00001000 (4096 bytes)
DSPAPOS: 0x00000000 (0, 0)
DSPASIZE: 0x025703ff (1024, 600)
DSPABASE: 0x00800000
DSPASURF: 0x00000000
DSPATILEOFF: 0x00000000
PIPEACONF: 0x00000000 (disabled, single-wide)
PIPEASRC: 0x027f01df (640, 480)
PIPEASTAT: 0x00000000 (status:)
PIPEA_GMCH_DATA_M: 0x00000000
PIPEA_GMCH_DATA_N: 0x00000000
PIPEA_DP_LINK_M: 0x00000000
PIPEA_DP_LINK_N: 0x00000000
CURSOR_A_BASE: 0x00000000
CURSOR_A_CONTROL: 0x00000000
CURSOR_A_POSITION: 0x00000000
FPA0: 0x00031108 (n = 3, m1 = 17, m2 = 8)
FPA1: 0x00031108 (n = 3, m1 = 17, m2 = 8)
DPLL_A: 0x04800003 (disabled, non-dvo, VGA, default clock, DAC/serial mode, p1 = 8, p2 = 10, SDVO mult 1)
DPLL_A_MD: 0x00000000
HTOTAL_A: 0x031f027f (640 active, 800 total)
HBLANK_A: 0x03170287 (648 start, 792 end)
HSYNC_A: 0x02ef028f (656 start, 752 end)
VTOTAL_A: 0x020c01df (480 active, 525 total)
VBLANK_A: 0x020401e7 (488 start, 517 end)
VSYNC_A: 0x01eb01e9 (490 start, 492 end)
BCLRPAT_A: 0x00000000
VSYNCSHIFT_A: 0x00000000
DSPBCNTR: 0x19000000 (disabled, pipe B)
DSPBSTRIDE: 0x00000c80 (3200 bytes)
DSPBPOS: 0x00000000 (0, 0)
DSPBSIZE: 0x0257031f (800, 600)
DSPBBASE: 0x00000000
DSPBSURF: 0x00000000
DSPBTILEOFF: 0x00000000
PIPEBCONF: 0x80000000 (enabled, single-wide)
PIPEBSRC: 0x03ff0257 (1024, 600)
PIPEBSTAT: 0x80000302 (status: FIFO_UNDERRUN VSYNC_INT_STATUS DLINE_COMPARE_STATUS VBLANK_INT_STATUS)
PIPEB_GMCH_DATA_M: 0x00000000
PIPEB_GMCH_DATA_N: 0x00000000
PIPEB_DP_LINK_M: 0x00000000
PIPEB_DP_LINK_N: 0x00000000
CURSOR_B_BASE: 0x36764000
CURSOR_B_CONTROL: 0x14070027
CURSOR_B_POSITION: 0x011001cb
FPB0: 0x00051008 (n = 5, m1 = 16, m2 = 8)
FPB1: 0x00051008 (n = 5, m1 = 16, m2 = 8)
DPLL_B: 0x98026000 (enabled, non-dvo, spread spectrum clock, LVDS mode, p1 = 2, p2 = 14, SDVO mult 1)
DPLL_B_MD: 0x00000000
HTOTAL_B: 0x04e103ff (1024 active, 1250 total)
HBLANK_B: 0x04e103ff (1024 start, 1250 end)
HSYNC_B: 0x047f045c (1117 start, 1152 end)
VTOTAL_B: 0x02a70257 (600 active, 680 total)
VBLANK_B: 0x02a70257 (600 start, 680 end)
VSYNC_B: 0x025d0258 (601 start, 606 end)
BCLRPAT_B: 0x00000000
VSYNCSHIFT_B: 0x00000000
VCLK_DIVISOR_VGA0: 0x00031108
VCLK_DIVISOR_VGA1: 0x00031406
VCLK_POST_DIV: 0x00020002
VGACNTRL: 0x80000000 (disabled)
TV_CTL: 0x00000010
TV_DAC: 0x70000000
TV_CSC_Y: 0x00000000
TV_CSC_Y2: 0x00000000
TV_CSC_U: 0x00000000
TV_CSC_U2: 0x00000000
TV_CSC_V: 0x00000000
TV_CSC_V2: 0x00000000
TV_CLR_KNOBS: 0x00000000
TV_CLR_LEVEL: 0x00000000
TV_H_CTL_1: 0x00000000
TV_H_CTL_2: 0x00000000
TV_H_CTL_3: 0x00000000
TV_V_CTL_1: 0x00000000
TV_V_CTL_2: 0x00000000
TV_V_CTL_3: 0x00000000
TV_V_CTL_4: 0x00000000
TV_V_CTL_5: 0x00000000
TV_V_CTL_6: 0x00000000
TV_V_CTL_7: 0x00000000
TV_SC_CTL_1: 0x00000000
TV_SC_CTL_2: 0x00000000
TV_SC_CTL_3: 0x00000000
TV_WIN_POS: 0x00000000
TV_WIN_SIZE: 0x00000000
TV_FILTER_CTL_1: 0x00000000
TV_FILTER_CTL_2: 0x00000000
TV_FILTER_CTL_3: 0x00000000
TV_CC_CONTROL: 0x00000000
TV_CC_DATA: 0x00000000
TV_H_LUMA_0: 0x00000000
TV_H_LUMA_59: 0x00000000
TV_H_CHROMA_0: 0x00000000
TV_H_CHROMA_59: 0x00000000
FBC_CFB_BASE: 0x00000000
FBC_LL_BASE: 0x00000000
FBC_CONTROL: 0x00000000
FBC_COMMAND: 0x00000000
FBC_STATUS: 0x20000000
FBC_CONTROL2: 0x00000000
FBC_FENCE_OFF: 0x00000000
FBC_MOD_NUM: 0x00000000
MI_MODE: 0x00000200
MI_ARB_STATE: 0x00000840
MI_RDRET_STATE: 0x00000000
ECOSKPD: 0x00000307
DP_B: 0x00000000
DPB_AUX_CH_CTL: 0x00000000
DPB_AUX_CH_DATA1: 0x00000000
DPB_AUX_CH_DATA2: 0x00000000
DPB_AUX_CH_DATA3: 0x00000000
DPB_AUX_CH_DATA4: 0x00000000
DPB_AUX_CH_DATA5: 0x00000000
DP_C: 0x00000000
DPC_AUX_CH_CTL: 0x00000000
DPC_AUX_CH_DATA1: 0x00000000
DPC_AUX_CH_DATA2: 0x00000000
DPC_AUX_CH_DATA3: 0x00000000
DPC_AUX_CH_DATA4: 0x00000000
DPC_AUX_CH_DATA5: 0x00000000
DP_D: 0x00000000
DPD_AUX_CH_CTL: 0x00000000
DPD_AUX_CH_DATA1: 0x00000000
DPD_AUX_CH_DATA2: 0x00000000
DPD_AUX_CH_DATA3: 0x00000000
DPD_AUX_CH_DATA4: 0x00000000
DPD_AUX_CH_DATA5: 0x00000000
AUD_CONFIG: 0x00000000
AUD_HDMIW_STATUS: 0x00000000
AUD_CONV_CHCNT: 0x00000000
VIDEO_DIP_CTL: 0x00000000
AUD_PINW_CNTR: 0x00000000
AUD_CNTL_ST: 0x00000000
AUD_PIN_CAP: 0x00000000
AUD_PINW_CAP: 0x00000000
AUD_PINW_UNSOLRESP: 0x00000000
AUD_OUT_DIG_CNVT: 0x00000000
AUD_OUT_CWCAP: 0x00000000
AUD_GRP_CAP: 0x00000000
FENCE 0: 0x04200021 (enabled, X tiled, 2048 pitch, 0x04200000 - 0x04300000 (1024kb))
FENCE 1: 0x00800231 (enabled, X tiled, 4096 pitch, 0x00800000 - 0x00c00000 (4096kb))
FENCE 2: 0x06100031 (enabled, X tiled, 4096 pitch, 0x06100000 - 0x06200000 (1024kb))
FENCE 3: 0x02a00031 (enabled, X tiled, 4096 pitch, 0x02a00000 - 0x02b00000 (1024kb))
FENCE 4: 0x05800031 (enabled, X tiled, 4096 pitch, 0x05800000 - 0x05900000 (1024kb))
FENCE 5: 0x00000000 (disabled)
FENCE 6: 0x00000000 (disabled)
FENCE 7: 0x02f00001 (enabled, X tiled, 512 pitch, 0x02f00000 - 0x03000000 (1024kb))
FENCE 8: 0x04d00021 (enabled, X tiled, 2048 pitch, 0x04d00000 - 0x04e00000 (1024kb))
FENCE 9: 0x06c00231 (enabled, X tiled, 4096 pitch, 0x06c00000 - 0x07000000 (4096kb))
FENCE 10: 0x04300021 (enabled, X tiled, 2048 pitch, 0x04300000 - 0x04400000 (1024kb))
FENCE 11: 0x01800231 (enabled, X tiled, 4096 pitch, 0x01800000 - 0x01c00000 (4096kb))
FENCE 12: 0x00000000 (disabled)
FENCE 13: 0x00000000 (disabled)
FENCE 14: 0x00000000 (disabled)
FENCE 15: 0x00000000 (disabled)
INST_PM: 0x00000000
pipe A dot 25200 n 3 m1 17 m2 8 p1 8 p2 10
pipe B dot 51020 n 5 m1 16 m2 8 p1 2 p2 14
[-- Attachment #5: reg_dump_good --]
[-- Type: text/plain, Size: 9091 bytes --]
DCC: 0x000f0400 (single channel, XOR randomization: disabled, XOR bit: 11)
CHDECMISC: 0x22b97428 (XOR bank/rank, ch2 enh disabled, ch1 enh enabled, ch0 enh disabled, flex disabled, ep not present)
C0DRB0: 0x000f0400 (0x0400)
C0DRB1: 0x0000000f (0x000f)
C0DRB2: 0x00000000 (0x0000)
C0DRB3: 0x01180000 (0x0000)
C1DRB0: 0x0e0d0d0c (0x0d0c)
C1DRB1: 0x0f0e0e0d (0x0e0d)
C1DRB2: 0x100f0f0e (0x0f0e)
C1DRB3: 0x0e0d100f (0x100f)
C0DRA01: 0x04020118 (0x0118)
C0DRA23: 0x00000402 (0x0402)
C1DRA01: 0x100f0e0d (0x0e0d)
C1DRA23: 0x1211100f (0x100f)
PGETBL_CTL: 0x7ffc0001
VCLK_DIVISOR_VGA0: 0x00031108 (n = 3, m1 = 17, m2 = 8)
VCLK_DIVISOR_VGA1: 0x00031406 (n = 3, m1 = 20, m2 = 6)
VCLK_POST_DIV: 0x00020002 (vga0 p1 = 4, p2 = 2, vga1 p1 = 2, p2 = 2)
DPLL_TEST: 0x00010001 ()
CACHE_MODE_0: 0x00006820
D_STATE: 0x0000000b
DSPCLK_GATE_D: 0x00001000 (clock gates disabled: DPLUNIT)
RENCLK_GATE_D1: 0x00000000
RENCLK_GATE_D2: 0x00000000
SDVOB: 0x00480000 (disabled, pipe A, stall disabled, not detected)
SDVOC: 0x00480000 (disabled, pipe A, stall disabled, not detected)
SDVOUDI: 0x000000ff
DSPARB: 0x00001d9c
DSPFW1: 0x00000000
DSPFW2: 0x00000000
DSPFW3: 0x00000000
ADPA: 0x40008c18 (disabled, pipe B, +hsync, +vsync)
LVDS: 0xc0300300 (enabled, pipe B, 18 bit, 1 channel)
DVOA: 0x00000000 (disabled, pipe A, no stall, -hsync, -vsync)
DVOB: 0x00480000 (disabled, pipe A, no stall, -hsync, -vsync)
DVOC: 0x00480000 (disabled, pipe A, no stall, -hsync, -vsync)
DVOA_SRCDIM: 0x00000000
DVOB_SRCDIM: 0x00000000
DVOC_SRCDIM: 0x00000000
PP_CONTROL: 0x00000001 (power target: on)
PP_STATUS: 0xc0000008 (on, ready, sequencing idle)
PP_ON_DELAYS: 0x025807d0
PP_OFF_DELAYS: 0x01f407d0
PP_DIVISOR: 0x00251b05
PFIT_CONTROL: 0x00000000
PFIT_PGM_RATIOS: 0x00000000
PORT_HOTPLUG_EN: 0x00000220
PORT_HOTPLUG_STAT: 0x00000000
DSPACNTR: 0xd9000000 (enabled, pipe B)
DSPASTRIDE: 0x00001000 (4096 bytes)
DSPAPOS: 0x00000000 (0, 0)
DSPASIZE: 0x025703ff (1024, 600)
DSPABASE: 0x06c00000
DSPASURF: 0x00000000
DSPATILEOFF: 0x00000000
PIPEACONF: 0x00000000 (disabled, single-wide)
PIPEASRC: 0x027f01df (640, 480)
PIPEASTAT: 0x00000000 (status:)
PIPEA_GMCH_DATA_M: 0x00000000
PIPEA_GMCH_DATA_N: 0x00000000
PIPEA_DP_LINK_M: 0x00000000
PIPEA_DP_LINK_N: 0x00000000
CURSOR_A_BASE: 0x00000000
CURSOR_A_CONTROL: 0x00000000
CURSOR_A_POSITION: 0x00000000
FPA0: 0x00031108 (n = 3, m1 = 17, m2 = 8)
FPA1: 0x00031108 (n = 3, m1 = 17, m2 = 8)
DPLL_A: 0x04800003 (disabled, non-dvo, VGA, default clock, DAC/serial mode, p1 = 8, p2 = 10, SDVO mult 1)
DPLL_A_MD: 0x00000000
HTOTAL_A: 0x031f027f (640 active, 800 total)
HBLANK_A: 0x03170287 (648 start, 792 end)
HSYNC_A: 0x02ef028f (656 start, 752 end)
VTOTAL_A: 0x020c01df (480 active, 525 total)
VBLANK_A: 0x020401e7 (488 start, 517 end)
VSYNC_A: 0x01eb01e9 (490 start, 492 end)
BCLRPAT_A: 0x00000000
VSYNCSHIFT_A: 0x00000000
DSPBCNTR: 0x19000000 (disabled, pipe B)
DSPBSTRIDE: 0x00000c80 (3200 bytes)
DSPBPOS: 0x00000000 (0, 0)
DSPBSIZE: 0x0257031f (800, 600)
DSPBBASE: 0x001d4c00
DSPBSURF: 0x00000000
DSPBTILEOFF: 0x00000000
PIPEBCONF: 0x80000000 (enabled, single-wide)
PIPEBSRC: 0x03ff0257 (1024, 600)
PIPEBSTAT: 0x00000302 (status: VSYNC_INT_STATUS DLINE_COMPARE_STATUS VBLANK_INT_STATUS)
PIPEB_GMCH_DATA_M: 0x00000000
PIPEB_GMCH_DATA_N: 0x00000000
PIPEB_DP_LINK_M: 0x00000000
PIPEB_DP_LINK_N: 0x00000000
CURSOR_B_BASE: 0x35cf8000
CURSOR_B_CONTROL: 0x14000027
CURSOR_B_POSITION: 0x00d60288
FPB0: 0x00051008 (n = 5, m1 = 16, m2 = 8)
FPB1: 0x00051008 (n = 5, m1 = 16, m2 = 8)
DPLL_B: 0x98026000 (enabled, non-dvo, spread spectrum clock, LVDS mode, p1 = 2, p2 = 14, SDVO mult 1)
DPLL_B_MD: 0x00000000
HTOTAL_B: 0x04e103ff (1024 active, 1250 total)
HBLANK_B: 0x04e103ff (1024 start, 1250 end)
HSYNC_B: 0x047f045c (1117 start, 1152 end)
VTOTAL_B: 0x02a70257 (600 active, 680 total)
VBLANK_B: 0x02a70257 (600 start, 680 end)
VSYNC_B: 0x025d0258 (601 start, 606 end)
BCLRPAT_B: 0x00000000
VSYNCSHIFT_B: 0x00000000
VCLK_DIVISOR_VGA0: 0x00031108
VCLK_DIVISOR_VGA1: 0x00031406
VCLK_POST_DIV: 0x00020002
VGACNTRL: 0x80000000 (disabled)
TV_CTL: 0x00000010
TV_DAC: 0x70000000
TV_CSC_Y: 0x00000000
TV_CSC_Y2: 0x00000000
TV_CSC_U: 0x00000000
TV_CSC_U2: 0x00000000
TV_CSC_V: 0x00000000
TV_CSC_V2: 0x00000000
TV_CLR_KNOBS: 0x00000000
TV_CLR_LEVEL: 0x00000000
TV_H_CTL_1: 0x00000000
TV_H_CTL_2: 0x00000000
TV_H_CTL_3: 0x00000000
TV_V_CTL_1: 0x00000000
TV_V_CTL_2: 0x00000000
TV_V_CTL_3: 0x00000000
TV_V_CTL_4: 0x00000000
TV_V_CTL_5: 0x00000000
TV_V_CTL_6: 0x00000000
TV_V_CTL_7: 0x00000000
TV_SC_CTL_1: 0x00000000
TV_SC_CTL_2: 0x00000000
TV_SC_CTL_3: 0x00000000
TV_WIN_POS: 0x00000000
TV_WIN_SIZE: 0x00000000
TV_FILTER_CTL_1: 0x00000000
TV_FILTER_CTL_2: 0x00000000
TV_FILTER_CTL_3: 0x00000000
TV_CC_CONTROL: 0x00000000
TV_CC_DATA: 0x00000000
TV_H_LUMA_0: 0x00000000
TV_H_LUMA_59: 0x00000000
TV_H_CHROMA_0: 0x00000000
TV_H_CHROMA_59: 0x00000000
FBC_CFB_BASE: 0x00000000
FBC_LL_BASE: 0x00000000
FBC_CONTROL: 0x00000000
FBC_COMMAND: 0x00000000
FBC_STATUS: 0x20000000
FBC_CONTROL2: 0x00000000
FBC_FENCE_OFF: 0x00000000
FBC_MOD_NUM: 0x00000000
MI_MODE: 0x00000200
MI_ARB_STATE: 0x00000840
MI_RDRET_STATE: 0x00000000
ECOSKPD: 0x00000307
DP_B: 0x00000000
DPB_AUX_CH_CTL: 0x00000000
DPB_AUX_CH_DATA1: 0x00000000
DPB_AUX_CH_DATA2: 0x00000000
DPB_AUX_CH_DATA3: 0x00000000
DPB_AUX_CH_DATA4: 0x00000000
DPB_AUX_CH_DATA5: 0x00000000
DP_C: 0x00000000
DPC_AUX_CH_CTL: 0x00000000
DPC_AUX_CH_DATA1: 0x00000000
DPC_AUX_CH_DATA2: 0x00000000
DPC_AUX_CH_DATA3: 0x00000000
DPC_AUX_CH_DATA4: 0x00000000
DPC_AUX_CH_DATA5: 0x00000000
DP_D: 0x00000000
DPD_AUX_CH_CTL: 0x00000000
DPD_AUX_CH_DATA1: 0x00000000
DPD_AUX_CH_DATA2: 0x00000000
DPD_AUX_CH_DATA3: 0x00000000
DPD_AUX_CH_DATA4: 0x00000000
DPD_AUX_CH_DATA5: 0x00000000
AUD_CONFIG: 0x00000000
AUD_HDMIW_STATUS: 0x00000000
AUD_CONV_CHCNT: 0x00000000
VIDEO_DIP_CTL: 0x00000000
AUD_PINW_CNTR: 0x00000000
AUD_CNTL_ST: 0x00000000
AUD_PIN_CAP: 0x00000000
AUD_PINW_CAP: 0x00000000
AUD_PINW_UNSOLRESP: 0x00000000
AUD_OUT_DIG_CNVT: 0x00000000
AUD_OUT_CWCAP: 0x00000000
AUD_GRP_CAP: 0x00000000
FENCE 0: 0x00000000 (disabled)
FENCE 1: 0x00000000 (disabled)
FENCE 2: 0x00000000 (disabled)
FENCE 3: 0x00000000 (disabled)
FENCE 4: 0x05e00031 (enabled, X tiled, 4096 pitch, 0x05e00000 - 0x05f00000 (1024kb))
FENCE 5: 0x00000000 (disabled)
FENCE 6: 0x02f00021 (enabled, X tiled, 2048 pitch, 0x02f00000 - 0x03000000 (1024kb))
FENCE 7: 0x07400021 (enabled, X tiled, 2048 pitch, 0x07400000 - 0x07500000 (1024kb))
FENCE 8: 0x01800231 (enabled, X tiled, 4096 pitch, 0x01800000 - 0x01c00000 (4096kb))
FENCE 9: 0x00800231 (enabled, X tiled, 4096 pitch, 0x00800000 - 0x00c00000 (4096kb))
FENCE 10: 0x00000000 (disabled)
FENCE 11: 0x07500021 (enabled, X tiled, 2048 pitch, 0x07500000 - 0x07600000 (1024kb))
FENCE 12: 0x05a00001 (enabled, X tiled, 512 pitch, 0x05a00000 - 0x05b00000 (1024kb))
FENCE 13: 0x06c00231 (enabled, X tiled, 4096 pitch, 0x06c00000 - 0x07000000 (4096kb))
FENCE 14: 0x06000031 (enabled, X tiled, 4096 pitch, 0x06000000 - 0x06100000 (1024kb))
FENCE 15: 0x00000000 (disabled)
INST_PM: 0x00000000
pipe A dot 25200 n 3 m1 17 m2 8 p1 8 p2 10
pipe B dot 51020 n 5 m1 16 m2 8 p1 2 p2 14
[-- Attachment #6: Type: text/plain, Size: 159 bytes --]
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2011-02-17 7:26 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-11 20:59 [regression] drm/i915: cleanup per-pipe reg usage Alexey Fisher
[not found] ` <1297520176.10989.1.camel@zwerg>
[not found] ` <b9dded$hu5fo8@orsmga002.jf.intel.com>
2011-02-12 21:02 ` Alexey Fisher
2011-02-16 18:42 ` Jesse Barnes
2011-02-16 18:57 ` Jesse Barnes
2011-02-17 7:26 ` Alexey Fisher [this message]
2011-02-17 18:32 ` Jesse Barnes
2011-02-17 20:54 ` Alexey Fisher
2011-02-17 21:09 ` Jesse Barnes
2011-02-17 21:24 ` Alexey Fisher
2011-02-17 21:26 ` Alexey Fisher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1297927580.3349.2.camel@mini \
--to=bug-track@fisher-privat.net \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jbarnes@virtuousgeek.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.