From: Ping Cheng <pinglinux@gmail.com>
To: linux-input@vger.kernel.org
Cc: rydberg@euromail.se, Ping Cheng <pinglinux@gmail.com>,
Ping Cheng <pingc@wacom.com>
Subject: [PATCH 4/4 v3] input - wacom: Support 2FGT in MT format
Date: Tue, 1 Mar 2011 16:19:02 -0800 [thread overview]
Message-ID: <1299025142-8626-1-git-send-email-pinglinux@gmail.com> (raw)
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Ping Cheng <pingc@wacom.com>
---
v3: Use contact_with_no_pen_down_count instead of individual touch
state to decide touch_down status.
---
drivers/input/tablet/wacom_sys.c | 12 ++++----
drivers/input/tablet/wacom_wac.c | 59 ++++++++++++++++++++++++++++++--------
2 files changed, 53 insertions(+), 18 deletions(-)
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index cf8fb9f..449c0a4 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -193,16 +193,16 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi
case HID_USAGE_X:
if (usage == WCM_DESKTOP) {
if (finger) {
- features->device_type = BTN_TOOL_DOUBLETAP;
+ features->device_type = BTN_TOOL_FINGER;
if (features->type == TABLETPC2FG) {
/* need to reset back */
features->pktlen = WACOM_PKGLEN_TPC2FG;
- features->device_type = BTN_TOOL_TRIPLETAP;
+ features->device_type = BTN_TOOL_DOUBLETAP;
}
if (features->type == BAMBOO_PT) {
/* need to reset back */
features->pktlen = WACOM_PKGLEN_BBTOUCH;
- features->device_type = BTN_TOOL_TRIPLETAP;
+ features->device_type = BTN_TOOL_DOUBLETAP;
features->x_phy =
get_unaligned_le16(&report[i + 5]);
features->x_max =
@@ -241,11 +241,11 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi
case HID_USAGE_Y:
if (usage == WCM_DESKTOP) {
if (finger) {
- features->device_type = BTN_TOOL_DOUBLETAP;
+ features->device_type = BTN_TOOL_FINGER;
if (features->type == TABLETPC2FG) {
/* need to reset back */
features->pktlen = WACOM_PKGLEN_TPC2FG;
- features->device_type = BTN_TOOL_TRIPLETAP;
+ features->device_type = BTN_TOOL_DOUBLETAP;
features->y_max =
get_unaligned_le16(&report[i + 3]);
features->y_phy =
@@ -254,7 +254,7 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi
} else if (features->type == BAMBOO_PT) {
/* need to reset back */
features->pktlen = WACOM_PKGLEN_BBTOUCH;
- features->device_type = BTN_TOOL_TRIPLETAP;
+ features->device_type = BTN_TOOL_DOUBLETAP;
features->y_phy =
get_unaligned_le16(&report[i + 3]);
features->y_max =
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index ebbb375..f6041f4 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -675,6 +675,37 @@ static int wacom_intuos_irq(struct wacom_wac *wacom)
return 1;
}
+static int wacom_tpc_mt_touch(struct wacom_wac *wacom)
+{
+ struct input_dev *input = wacom->input;
+ unsigned char *data = wacom->data;
+ int contact_with_no_pen_down_count = 0;
+ int i;
+
+ for (i = 0; i < 2; i++) {
+ int p = data[1] & (1 << i);
+ bool touch = p && !wacom->shared->stylus_in_proximity;
+
+ input_mt_slot(input, i);
+ input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
+ if (touch) {
+ int x = le16_to_cpup((__le16 *)&data[i * 2 + 2]) & 0x7fff;
+ int y = le16_to_cpup((__le16 *)&data[i * 2 + 6]) & 0x7fff;
+
+ input_report_abs(input, ABS_MT_POSITION_X, x);
+ input_report_abs(input, ABS_MT_POSITION_Y, y);
+ contact_with_no_pen_down_count++;
+ }
+ }
+
+ /* keep touch state for pen event */
+ wacom->shared->touch_down = (contact_with_no_pen_down_count > 0);
+
+ input_mt_report_pointer_emulation(input, true);
+
+ return 1;
+}
+
static int wacom_tpc_single_touch(struct wacom_wac *wacom, size_t len)
{
char *data = wacom->data;
@@ -758,6 +789,8 @@ static int wacom_tpc_irq(struct wacom_wac *wacom, size_t len)
if (len == WACOM_PKGLEN_TPC1FG || data[0] == WACOM_REPORT_TPC1FG)
return wacom_tpc_single_touch(wacom, len);
+ else if (data[0] == WACOM_REPORT_TPC2FG)
+ return wacom_tpc_mt_touch(wacom);
else if (data[0] == WACOM_REPORT_PENABLED)
return wacom_tpc_pen(wacom);
@@ -984,7 +1017,7 @@ void wacom_setup_device_quirks(struct wacom_features *features)
{
/* touch device found but size is not defined. use default */
- if (features->device_type == BTN_TOOL_DOUBLETAP && !features->x_max) {
+ if (features->device_type == BTN_TOOL_FINGER && !features->x_max) {
features->x_max = 1023;
features->y_max = 1023;
}
@@ -996,7 +1029,7 @@ void wacom_setup_device_quirks(struct wacom_features *features)
/* quirks for bamboo touch */
if (features->type == BAMBOO_PT &&
- features->device_type == BTN_TOOL_TRIPLETAP) {
+ features->device_type == BTN_TOOL_DOUBLETAP) {
features->x_max <<= 5;
features->y_max <<= 5;
features->x_fuzz <<= 5;
@@ -1132,28 +1165,30 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
break;
case TABLETPC2FG:
- if (features->device_type == BTN_TOOL_TRIPLETAP) {
- __set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
- input_set_capability(input_dev, EV_MSC, MSC_SERIAL);
+ if (features->device_type == BTN_TOOL_DOUBLETAP) {
+
+ input_mt_init_slots(input_dev, 2);
+ input_set_abs_params(input_dev, ABS_MT_TOOL_TYPE,
+ 0, MT_TOOL_MAX, 0, 0);
+ input_set_abs_params(input_dev, ABS_MT_POSITION_X,
+ 0, features->x_max, 0, 0);
+ input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
+ 0, features->y_max, 0, 0);
}
/* fall through */
case TABLETPC:
__clear_bit(ABS_MISC, input_dev->absbit);
- if (features->device_type == BTN_TOOL_DOUBLETAP ||
- features->device_type == BTN_TOOL_TRIPLETAP) {
+ if (features->device_type != BTN_TOOL_PEN) {
input_abs_set_res(input_dev, ABS_X,
wacom_calculate_touch_res(features->x_max,
features->x_phy));
input_abs_set_res(input_dev, ABS_Y,
wacom_calculate_touch_res(features->y_max,
features->y_phy));
- }
-
- if (features->device_type != BTN_TOOL_PEN)
break; /* no need to process stylus stuff */
-
+ }
/* fall through */
case PL:
@@ -1171,7 +1206,7 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev,
case BAMBOO_PT:
__clear_bit(ABS_MISC, input_dev->absbit);
- if (features->device_type == BTN_TOOL_TRIPLETAP) {
+ if (features->device_type == BTN_TOOL_DOUBLETAP) {
__set_bit(BTN_LEFT, input_dev->keybit);
__set_bit(BTN_FORWARD, input_dev->keybit);
__set_bit(BTN_BACK, input_dev->keybit);
--
1.7.4
next reply other threads:[~2011-03-02 0:20 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-02 0:19 Ping Cheng [this message]
2011-03-05 8:46 ` [PATCH 4/4 v3] input - wacom: Support 2FGT in MT format Henrik Rydberg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1299025142-8626-1-git-send-email-pinglinux@gmail.com \
--to=pinglinux@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=pingc@wacom.com \
--cc=rydberg@euromail.se \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.