All of lore.kernel.org
 help / color / mirror / Atom feed
From: Benoit Goby <benoit-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org>
To: David Brownell
	<dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org>,
	Greg Kroah-Hartman <gregkh-l3A5Bk7waGM@public.gmane.org>,
	linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Robert Morell <rmorell-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>,
	Benoit Goby <benoit-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org>,
	Olof Johansson <olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org>,
	Erik Gilling <konkers-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org>,
	linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH v6 4/4] USB: ehci: tegra: Align DMA transfers to 32 bytes
Date: Wed,  9 Mar 2011 16:28:57 -0800	[thread overview]
Message-ID: <1299716937-17704-5-git-send-email-benoit@android.com> (raw)
In-Reply-To: <1299716937-17704-1-git-send-email-benoit-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org>

From: Robert Morell <rmorell-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>

The Tegra2 USB controller doesn't properly deal with misaligned DMA
buffers, causing corruption.  This is especially prevalent with USB
network adapters, where skbuff alignment is often in the middle of a
4-byte dword.

To avoid this, allocate a temporary buffer for the DMA if the provided
buffer isn't sufficiently aligned.

Signed-off-by: Robert Morell <rmorell-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Benoit Goby <benoit-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org>
---
 drivers/usb/host/ehci-tegra.c |   90 +++++++++++++++++++++++++++++++++++++++++
 1 files changed, 90 insertions(+), 0 deletions(-)

diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index 6202102..a516af2 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -23,6 +23,8 @@
 #include <linux/usb/otg.h>
 #include <mach/usb_phy.h>
 
+#define TEGRA_USB_DMA_ALIGN 32
+
 struct tegra_ehci_hcd {
 	struct ehci_hcd *ehci;
 	struct tegra_usb_phy *phy;
@@ -383,6 +385,92 @@ static int tegra_ehci_bus_resume(struct usb_hcd *hcd)
 }
 #endif
 
+struct temp_buffer {
+	void *kmalloc_ptr;
+	void *old_xfer_buffer;
+	u8 data[0];
+};
+
+static void free_temp_buffer(struct urb *urb)
+{
+	enum dma_data_direction dir;
+	struct temp_buffer *temp;
+
+	if (!(urb->transfer_flags & URB_ALIGNED_TEMP_BUFFER))
+		return;
+
+	dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+
+	temp = container_of(urb->transfer_buffer, struct temp_buffer,
+			    data);
+
+	if (dir == DMA_FROM_DEVICE)
+		memcpy(temp->old_xfer_buffer, temp->data,
+		       urb->transfer_buffer_length);
+	urb->transfer_buffer = temp->old_xfer_buffer;
+	kfree(temp->kmalloc_ptr);
+
+	urb->transfer_flags &= ~URB_ALIGNED_TEMP_BUFFER;
+}
+
+static int alloc_temp_buffer(struct urb *urb, gfp_t mem_flags)
+{
+	enum dma_data_direction dir;
+	struct temp_buffer *temp, *kmalloc_ptr;
+	size_t kmalloc_size;
+
+	if (urb->num_sgs || urb->sg ||
+	    urb->transfer_buffer_length == 0 ||
+	    !((uintptr_t)urb->transfer_buffer & (TEGRA_USB_DMA_ALIGN - 1)))
+		return 0;
+
+	dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+
+	/* Allocate a buffer with enough padding for alignment */
+	kmalloc_size = urb->transfer_buffer_length +
+		sizeof(struct temp_buffer) + TEGRA_USB_DMA_ALIGN - 1;
+
+	kmalloc_ptr = kmalloc(kmalloc_size, mem_flags);
+	if (!kmalloc_ptr)
+		return -ENOMEM;
+
+	/* Position our struct temp_buffer such that data is aligned */
+	temp = PTR_ALIGN(kmalloc_ptr + 1, TEGRA_USB_DMA_ALIGN) - 1;
+
+	temp->kmalloc_ptr = kmalloc_ptr;
+	temp->old_xfer_buffer = urb->transfer_buffer;
+	if (dir == DMA_TO_DEVICE)
+		memcpy(temp->data, urb->transfer_buffer,
+		       urb->transfer_buffer_length);
+	urb->transfer_buffer = temp->data;
+
+	urb->transfer_flags |= URB_ALIGNED_TEMP_BUFFER;
+
+	return 0;
+}
+
+static int tegra_ehci_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
+				      gfp_t mem_flags)
+{
+	int ret;
+
+	ret = alloc_temp_buffer(urb, mem_flags);
+	if (ret)
+		return ret;
+
+	ret = usb_hcd_map_urb_for_dma(hcd, urb, mem_flags);
+	if (ret)
+		free_temp_buffer(urb);
+
+	return ret;
+}
+
+static void tegra_ehci_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
+{
+	usb_hcd_unmap_urb_for_dma(hcd, urb);
+	free_temp_buffer(urb);
+}
+
 static const struct hc_driver tegra_ehci_hc_driver = {
 	.description		= hcd_name,
 	.product_desc		= "Tegra EHCI Host Controller",
@@ -398,6 +486,8 @@ static const struct hc_driver tegra_ehci_hc_driver = {
 	.shutdown		= tegra_ehci_shutdown,
 	.urb_enqueue		= ehci_urb_enqueue,
 	.urb_dequeue		= ehci_urb_dequeue,
+	.map_urb_for_dma	= tegra_ehci_map_urb_for_dma,
+	.unmap_urb_for_dma	= tegra_ehci_unmap_urb_for_dma,
 	.endpoint_disable	= ehci_endpoint_disable,
 	.endpoint_reset		= ehci_endpoint_reset,
 	.get_frame_number	= ehci_get_frame,
-- 
1.7.3.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

      parent reply	other threads:[~2011-03-10  0:28 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-03-10  0:28 [PATCH v6 0/4] Tegra EHCI driver Benoit Goby
     [not found] ` <1299716937-17704-1-git-send-email-benoit-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org>
2011-03-10  0:28   ` [PATCH v6 1/4] usb: otg: Add ulpi viewport access ops Benoit Goby
2011-03-10  0:28   ` [PATCH v6 2/4] ARM: tegra: Add support for Tegra USB PHYs Benoit Goby
2011-03-10  0:28   ` [PATCH v6 3/4] usb: host: Add EHCI driver for NVIDIA Tegra SoCs Benoit Goby
2011-03-10  0:28   ` Benoit Goby [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1299716937-17704-5-git-send-email-benoit@android.com \
    --to=benoit-z5hga2qsfarbdgjk7y7tuq@public.gmane.org \
    --cc=dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
    --cc=gregkh-l3A5Bk7waGM@public.gmane.org \
    --cc=konkers-z5hGa2qSFaRBDgjK7y7TUQ@public.gmane.org \
    --cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org \
    --cc=rmorell-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.