From mboxrd@z Thu Jan 1 00:00:00 1970 From: Michiel Date: Wed, 16 Mar 2011 09:49:20 +0000 Subject: Re: [lm-sensors] [PATCH v5 00/11] hwmon: (w83627ehf) Add support Message-Id: <1300268960.2000.12.camel@zolder> List-Id: References: <1299261486-15190-1-git-send-email-guenter.roeck@ericsson.com> In-Reply-To: <1299261486-15190-1-git-send-email-guenter.roeck@ericsson.com> MIME-Version: 1.0 Content-Type: text/plain; charset="windows-1252" Content-Transfer-Encoding: quoted-printable To: lm-sensors@vger.kernel.org Hi, I installed the stand alone module you created for the nct6775f and basic functionality seems OK. Although the voltage sensor readings seem a bit nonsensical. This is on an ASRock 870iCafe motherboard. ( http://www.asrock.com/mb/overview.asp?Model=870iCafe ) It has 2 4pin fan connectors and 1 3pin connector. I'm still trying to configure those for use with fancontrol. But I'm not there yet.. Thanks for all time and hard work you punt in to lm-sensors ! :-) =20 > k10temp-pci-00c3 > Adapter: PCI adapter > temp1: +17.5=EF=BF=BD=EF=BF=BDC (high =3D +70.0=EF=BF=BD=EF=BF=BDC= ) =20 >=20 > nct6775-isa-0290 > Adapter: ISA adapter > in0: +0.99 V (min =3D +0.00 V, max =3D +1.74 V) =20 > in1: +1.85 V (min =3D +0.00 V, max =3D +0.00 V) ALARM > in2: +3.41 V (min =3D +0.00 V, max =3D +0.00 V) ALARM > in3: +3.41 V (min =3D +0.00 V, max =3D +0.00 V) ALARM > in4: +0.06 V (min =3D +0.00 V, max =3D +0.00 V) ALARM > in5: +1.67 V (min =3D +0.00 V, max =3D +0.00 V) ALARM > in6: +1.70 V (min =3D +0.00 V, max =3D +0.00 V) ALARM > in7: +3.44 V (min =3D +0.00 V, max =3D +0.00 V) ALARM > in8: +3.39 V (min =3D +0.00 V, max =3D +0.00 V) ALARM > fan1: 1095 RPM (min =3D 0 RPM, div =3D 8) ALARM > fan2: 1095 RPM (min =3D 0 RPM, div =3D 8) ALARM > fan3: 1180 RPM (min =3D 0 RPM, div =3D 8) ALARM > SYSTIN: +30.0=EF=BF=BD=EF=BF=BDC (high =3D +0.0=EF=BF=BD=EF=BF=BDC= , hyst =3D +0.0=EF=BF=BD=EF=BF=BDC) ALARM sensor =3D thermistor > CPUTIN: +26.5=EF=BF=BD=EF=BF=BDC (high =3D +80.0=EF=BF=BD=EF=BF=BDC= , hyst =3D +75.0=EF=BF=BD=EF=BF=BDC) sensor =3D thermistor > AUXTIN: -12.5=EF=BF=BD=EF=BF=BDC (high =3D +80.0=EF=BF=BD=EF=BF=BDC= , hyst =3D +75.0=EF=BF=BD=EF=BF=BDC) sensor =3D thermistor > cpu0_vid: +0.375 V _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors