From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: linux-fbdev@vger.kernel.org
Subject: Re: Regression: black screen with Radeon KMS in 2.6.38 (2.6.37.4
Date: Mon, 21 Mar 2011 05:51:56 +0000 [thread overview]
Message-ID: <1300686716.2402.215.camel@pasglop> (raw)
In-Reply-To: <4D86E4E6.3040403@tds.net>
On Mon, 2011-03-21 at 01:40 -0400, John Lindgren wrote:
> Hi,
>
> I want to report a bug in the Linux kernel 2.6.38. Loading the radeon
> module causes the console to go completely blank (laptop backlight on,
> but nothing displayed). The system still responds to ctrl-alt-del and
> reboots. This is a regression from the previous kernel, 2.6.37.4, where
> kernel mode setting works flawlessly.
>
> With radeon.modeset=0, or with the module blacklisted, the system boots
> fine, and I can use X, but without the powersaving features available
> through KMS.
You should probably report that to the appropriate freedesktop mailing
lists & bugzilla. I am not directly involved in the dev. of KMS.
Cheers,
Ben.
> System: Toshiba Satellite A305-S6916
> Graphics: ATI Radeon Mobility HD 3650
> Kernel: 2.6.38 (x86_64)
>
> Kernel log when loading the module:
>
> Mar 21 00:57:38 localhost kernel: [drm] Initialized drm 1.1.0 20060810
> Mar 21 00:57:38 localhost kernel: [drm] radeon defaulting to kernel modesetting.
> Mar 21 00:57:38 localhost kernel: [drm] radeon kernel modesetting enabled.
> Mar 21 00:57:38 localhost kernel: radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> Mar 21 00:57:38 localhost kernel: radeon 0000:01:00.0: setting latency timer to 64
> Mar 21 00:57:38 localhost kernel: [drm] initializing kernel modesetting (RV635 0x1002:0x9591).
> Mar 21 00:57:38 localhost kernel: [drm] register mmio base: 0xD6300000
> Mar 21 00:57:38 localhost kernel: [drm] register mmio size: 65536
> Mar 21 00:57:38 localhost kernel: ATOM BIOS: Tosh_IEC_Potomac_M86_DDR2
> Mar 21 00:57:38 localhost kernel: radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
> Mar 21 00:57:38 localhost kernel: radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
> Mar 21 00:57:38 localhost kernel: [drm] Detected VRAM RAMQ2M, BAR%6M
> Mar 21 00:57:38 localhost kernel: [drm] RAM width 128bits DDR
> Mar 21 00:57:38 localhost kernel: [TTM] Zone kernel: Available graphics memory: 2027544 kiB.
> Mar 21 00:57:38 localhost kernel: [TTM] Initializing pool allocator.
> Mar 21 00:57:38 localhost kernel: [drm] radeon: 512M of VRAM memory ready
> Mar 21 00:57:38 localhost kernel: [drm] radeon: 512M of GTT memory ready.
> Mar 21 00:57:38 localhost kernel: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
> Mar 21 00:57:38 localhost kernel: [drm] Driver supports precise vblank timestamp query.
> Mar 21 00:57:38 localhost kernel: radeon 0000:01:00.0: irq 49 for MSI/MSI-X
> Mar 21 00:57:38 localhost kernel: radeon 0000:01:00.0: radeon: using MSI.
> Mar 21 00:57:38 localhost kernel: [drm] radeon: irq initialized.
> Mar 21 00:57:38 localhost kernel: [drm] GART: num cpu pages 131072, num gpu pages 131072
> Mar 21 00:57:38 localhost kernel: [drm] Loading RV635 Microcode
> Mar 21 00:57:38 localhost kernel: radeon 0000:01:00.0: WB enabled
> Mar 21 00:57:38 localhost kernel: [drm] ring test succeeded in 1 usecs
> Mar 21 00:57:38 localhost kernel: [drm] radeon: ib pool ready.
> Mar 21 00:57:38 localhost kernel: [drm] ib test succeeded in 0 usecs
> Mar 21 00:57:38 localhost kernel: [drm] Enabling audio support
> Mar 21 00:57:38 localhost kernel: HDMI hot plug event: Pin=3 Presence_Detect=0 ELD_Valid=0
>
>
> If there is any more info I can provide, please ask.
>
> -- John Lindgren
next prev parent reply other threads:[~2011-03-21 5:51 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-21 5:40 Regression: black screen with Radeon KMS in 2.6.38 (2.6.37.4 worked John Lindgren
2011-03-21 5:51 ` Benjamin Herrenschmidt [this message]
2011-03-21 5:58 ` Regression: black screen with Radeon KMS in 2.6.38 (2.6.37.4 Dave Airlie
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1300686716.2402.215.camel@pasglop \
--to=benh@kernel.crashing.org \
--cc=linux-fbdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.