From: ll <vic7tor@gmail.com>
To: linux-mtd@lists.infradead.org
Subject: Is the mtd-utils common
Date: Wed, 23 Mar 2011 21:22:31 +0800 [thread overview]
Message-ID: <1300886551.12466.7.camel@ll-desktop> (raw)
Today I upgrade my ubuntu from 10.04 to 10.10. After the upgrade, when I
use mkfs.ubifs and ubinize to create image. It make error when I mount
the /dev/ubi0_0. The error message below. Does the ubuntu upgrade change
the version of mkfs.ubifs? The linux kernel version is 2.6.37. Could
anyone help me?
[ 3727.837059] UBI: volume 0 ("rootfs") re-sized from 1626 to 2024 LEBs
[ 3727.837063] UBI DBG (pid 8119): uif_init: ubi0 major is 250
[ 3727.837241] UBI DBG (pid 8119): ubi_add_volume: add volume 0
[ 3727.837342] UBI: attached mtd0 to ubi0
[ 3727.837344] UBI: MTD device name: "NAND simulator
partition 0"
[ 3727.837345] UBI: MTD device size: 256 MiB
[ 3727.837346] UBI: number of good PEBs: 2048
[ 3727.837347] UBI: number of bad PEBs: 0
[ 3727.837349] UBI: number of corrupted PEBs: 0
[ 3727.837350] UBI: max. allowed volumes: 128
[ 3727.837351] UBI: wear-leveling threshold: 4096
[ 3727.837352] UBI: number of internal volumes: 1
[ 3727.837353] UBI: number of user volumes: 1
[ 3727.837354] UBI: available PEBs: 0
[ 3727.837355] UBI: total number of reserved PEBs: 2048
[ 3727.837357] UBI: number of PEBs reserved for bad PEB handling: 20
[ 3727.837358] UBI: max/mean erase counter: 1/0
[ 3727.837359] UBI: image sequence number: 489715990
[ 3727.838040] UBI: background thread "ubi_bgt0d" started, PID 8121
[ 3753.570906] UBI DBG (pid 8312): ubi_open_volume_path: open
volume /dev/ubi0_0, mode 1
[ 3753.570912] UBI DBG (pid 8312): ubi_open_volume: open device 0,
volume 0, mode 1
[ 3753.570921] UBI DBG (pid 8312): ubi_open_volume: open device 0,
volume 0, mode 2
[ 3753.570985] UBI DBG (pid 8312): ubi_is_mapped: test LEB 0:0
[ 3753.571015] UBI DBG (pid 8312): ubi_leb_read: read 4096 bytes from
LEB 0:0:0
[ 3753.571036] UBIFS error (pid 8312): ubifs_check_node: bad CRC:
calculated 0x9ec6d29b, read 0x3a705d1d
[ 3753.571038] UBIFS error (pid 8312): ubifs_check_node: bad node at LEB
0:0
[ 3753.571040] magic 0x6101831
[ 3753.571041] crc 0x3a705d1d
[ 3753.571043] node_type 6 (superblock node)
[ 3753.571044] group_type 0 (no node group)
[ 3753.571045] sqnum 2316
[ 3753.571046] len 4096
[ 3753.571047] key_hash 0 (R5)
[ 3753.571048] key_fmt 0 (simple)
[ 3753.571049] flags 0x0
[ 3753.571050] big_lpt 0
[ 3753.571051] min_io_size 2048
[ 3753.571052] leb_size 129024
[ 3753.571053] leb_cnt 25
[ 3753.571054] max_leb_cnt 1624
[ 3753.571055] max_bud_bytes 8388608
[ 3753.571056] log_lebs 5
[ 3753.571057] lpt_lebs 2
[ 3753.571058] orph_lebs 1
[ 3753.571059] jhead_cnt 1
[ 3753.571060] fanout 8
[ 3753.571061] lsave_cnt 256
[ 3753.571062] default_compr 1
[ 3753.571063] rp_size 0
[ 3753.571064] rp_uid 0
[ 3753.571065] rp_gid 0
[ 3753.571066] fmt_version 4
[ 3753.571067] time_gran 1000000000
[ 3753.571069] UUID A493A596-78A1-4A6A-9371-22D7BBB8CAF1
[ 3753.571072] Pid: 8312, comm: mount Tainted: P 2.6.37 #3
[ 3753.571073] Call Trace:
[ 3753.571083] [<fdcf49ad>] ubifs_check_node+0x1ad/0x310 [ubifs]
[ 3753.571090] [<fdcf4bef>] ubifs_read_node+0xdf/0x3d0 [ubifs]
[ 3753.571096] [<fdcf2a8b>] ? ubifs_read_sb_node+0x2b/0x90 [ubifs]
[ 3753.571101] [<fdcf2ab6>] ubifs_read_sb_node+0x56/0x90 [ubifs]
[ 3753.571106] [<fdcf2c6f>] ubifs_read_superblock+0x15f/0x1170 [ubifs]
[ 3753.571111] [<c01f7750>] ? map_vm_area+0x30/0x50
[ 3753.571114] [<c01f8d9d>] ? __vmalloc_area_node+0xbd/0x110
[ 3753.571121] [<fdd21ddd>] ? ubifs_debugging_init+0x5d/0x1e0 [ubifs]
[ 3753.571126] [<fdcf103b>] ? ubifs_fill_super+0x81b/0x1d10 [ubifs]
[ 3753.571129] [<c01f8cdb>] ? __vmalloc_node+0x9b/0xa0
[ 3753.571134] [<fdcf103b>] ? ubifs_fill_super+0x81b/0x1d10 [ubifs]
[ 3753.571139] [<fdcf103b>] ? ubifs_fill_super+0x81b/0x1d10 [ubifs]
[ 3753.571141] [<c01f8f30>] ? vmalloc+0x30/0x40
[ 3753.571146] [<fdcf0eac>] ubifs_fill_super+0x68c/0x1d10 [ubifs]
[ 3753.571151] [<fdcee010>] ? sb_test+0x0/0x20 [ubifs]
[ 3753.571154] [<c02144a6>] ? sget+0x2f6/0x3a0
[ 3753.571160] [<fdcf2616>] ubifs_mount+0xe6/0x360 [ubifs]
[ 3753.571163] [<c03525f4>] ? ida_get_new_above+0x104/0x1a0
[ 3753.571166] [<c0213f16>] vfs_kern_mount+0x76/0x210
[ 3753.571169] [<c0228377>] ? get_fs_type+0x97/0xb0
[ 3753.571174] [<fdcf2530>] ? ubifs_mount+0x0/0x360 [ubifs]
[ 3753.571176] [<c021410e>] do_kern_mount+0x3e/0xe0
[ 3753.571179] [<c022b113>] do_mount+0x2e3/0x6e0
[ 3753.571182] [<c01e5c89>] ? strndup_user+0x49/0x60
[ 3753.571184] [<c022b57b>] sys_mount+0x6b/0xa0
[ 3753.571186] [<c01030e3>] sysenter_do_call+0x12/0x28
[ 3753.571188] UBIFS error (pid 8312): ubifs_read_node: expected node
type 6
[ 3753.580101] UBI DBG (pid 8312): ubi_close_volume: close device 0,
volume 0, mode 2
[ 3753.580109] UBI DBG (pid 8312): ubi_close_volume: close device 0,
volume 0, mode 1
next reply other threads:[~2011-03-23 13:22 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-23 13:22 ll [this message]
2011-03-31 14:46 ` Is the mtd-utils common Artem Bityutskiy
2011-04-01 7:05 ` Riku Voipio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1300886551.12466.7.camel@ll-desktop \
--to=vic7tor@gmail.com \
--cc=linux-mtd@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.