From mboxrd@z Thu Jan 1 00:00:00 1970 From: Goncalo Gomes Subject: Xen 4.2 unstable + Jeremy's stable/2.6.32.x Date: Thu, 24 Mar 2011 17:39:50 +0000 Message-ID: <1300988390.2215.9.camel@eire> Reply-To: Goncalo.Gomes@Eu.Citrix.Com Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="=-Upzeh1WEkdUs2ndx2NRz" Return-path: List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , Sender: xen-devel-bounces@lists.xensource.com Errors-To: xen-devel-bounces@lists.xensource.com To: xen-devel@lists.xensource.com List-Id: xen-devel@lists.xenproject.org --=-Upzeh1WEkdUs2ndx2NRz Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 7bit I'm trying to setup an environment based on Lenny x86_64 + Xen4 Jeremy's stable 2.6.32.x tree. I can see Xen booting up from the serial console (logged and attached as dt29boot.log), however, it stops right after a number of "PCI add device (...)" lines. Not sure if relevant but as a part of my attempt at troubleshooting I switched into Xen's serial input by pressing ctrl+a three times and subsequently pressing 'Q'. Strangely, this seems to result in a list of PCI devices that is larger than the number of reportedly added PCI devices by Xen. Is this expected? Any alternate hints and/or suggestions would be fairly welcome. I'm attaching some relevant information about the HW in question. Goncalo grub entry title Xen 4.2 unstable / 2.6.32.33 root (hd0,0) kernel /boot/xen.gz com1=115200,8n1 console=com1,vga console_to_ring module /boot/vmlinuz-xen root=/dev/sda1 ro console=tty0 xencons=hvc console=hvc0 earlyprintk=xen module /boot/initrd-xen --=-Upzeh1WEkdUs2ndx2NRz Content-Disposition: attachment; filename="dt29boot.log" Content-Type: text/x-log; name="dt29boot.log"; charset="UTF-8" Content-Transfer-Encoding: 7bit Script started on Thu 24 Mar 2011 16:29:06 GMT goncalog@eire:~$ xenuse -t dt29 [Enter `^Ec?' for help]  Xen 4.2 unstable / 2.6.32.33  Debian GNU/Linux, kernel 2.6.26-2-amd64 (single-user mode)  Debian GNU/Linux, kernel 2.6.26-2-amd64 (single-user mode)  Xen 4.2 unstable / 2.6.32.33  Booting 'Xen 4.2 unstable / 2.6.32.33' root (hd0,0) Filesystem type is ext2fs, partition type 0x83 kernel /boot/xen.gz com1=115200,8n1 console=com1,vga console_to_ring [Multiboot-elf, <0x100000:0x188818:0x4c7e8>, shtab=0x2d5078, entry=0x100000] module /boot/vmlinuz-xen root=/dev/sda1 ro console=tty0 xencons=hvc console=hv c0 earlyprintk=xen [Multiboot-module @ 0x2d6000, 0x23de30 bytes] module /boot/initrd-xen [Multiboot-module @ 0x514000, 0x12d7a00 bytes] __ __ _ _ _ ___ __ \ \/ /___ _ __ | || | / | / _ \ _ __ ___ / /_ _ __ _ __ ___ \ // _ \ '_ \ | || |_ | || | | |__| '__/ __| '_ \ __| '_ \| '__/ _ \ / \ __/ | | | |__ _|| || |_| |__| | | (__| (_) |__| |_) | | | __/ /_/\_\___|_| |_| |_|(_)_(_)___/ |_| \___|\___/ | .__/|_| \___| |_| (XEN) Xen version 4.1.0-rc6-pre (scara@) (gcc version 4.5.1 20100907 (Red Hat 4.5.1-3) (GCC) ) Thu Feb 24 13:39:16 GMT 2011 (XEN) Latest ChangeSet: Thu Feb 24 09:33:19 2011 +0000 22947:598d1fc295b6 (XEN) Bootloader: GNU GRUB 0.97 (XEN) Command line: com1=115200,8n1 console=com1,vga console_to_ring (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds (XEN) EDID info not retrieved because no DDC retrieval method detected (XEN) Disc information: (XEN) Found 1 MBR signatures (XEN) Found 1 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009e000 (usable) (XEN) 0000000000100000 - 00000000bf699000 (usable) (XEN) 00000000bf699000 - 00000000bf6af000 (reserved) (XEN) 00000000bf6af000 - 00000000bf6ce000 (ACPI data) (XEN) 00000000bf6ce000 - 00000000c0000000 (reserved) (XEN) 00000000e0000000 - 00000000f0000000 (reserved) (XEN) 00000000fe000000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 0000000240000000 (usable) (XEN) ACPI: RSDP 000F0AA0, 0024 (r2 DELL ) (XEN) ACPI: XSDT 000F0BA0, 008C (r1 DELL PE_SC3 1 DELL 1) (XEN) ACPI: FACP BF6C3BB4, 00F4 (r3 DELL PE_SC3 1 DELL 1) (XEN) ACPI: DSDT BF6AF000, 3E43 (r1 DELL PE_SC3 1 INTL 20050624) (XEN) ACPI: FACS BF6C6000, 0040 (XEN) ACPI: APIC BF6C3478, 0152 (r1 DELL PE_SC3 1 DELL 1) (XEN) ACPI: SPCR BF6C35CC, 0050 (r1 DELL PE_SC3 1 DELL 1) (XEN) ACPI: HPET BF6C3620, 0038 (r1 DELL PE_SC3 1 DELL 1) (XEN) ACPI: DMAR BF6C365C, 00A8 (r1 DELL PE_SC3 1 DELL 1) (XEN) ACPI: MCFG BF6C3850, 003C (r1 DELL PE_SC3 1 DELL 1) (XEN) ACPI: WD__ BF6C3890, 0134 (r1 DELL PE_SC3 1 DELL 1) (XEN) ACPI: SLIC BF6C39C8, 0024 (r1 DELL PE_SC3 1 DELL 1) (XEN) ACPI: ERST BF6B2FC4, 0270 (r1 DELL PE_SC3 1 DELL 1) (XEN) ACPI: HEST BF6B3234, 03A8 (r1 DELL PE_SC3 1 DELL 1) (XEN) ACPI: BERT BF6B2E44, 0030 (r1 DELL PE_SC3 1 DELL 1) (XEN) ACPI: EINJ BF6B2E74, 0150 (r1 DELL PE_SC3 1 DELL 1) (XEN) ACPI: TCPA BF6C3B4C, 0064 (r2 DELL PE_SC3 1 DELL 1) (XEN) System RAM: 8182MB (8378588kB) (XEN) No NUMA configuration found (XEN) Faking a node at 0000000000000000-0000000240000000 (XEN) Domain heap initialised (XEN) found SMP MP-table at 000fe710 (XEN) DMI 2.6 present. (XEN) Using APIC driver default (XEN) ACPI: PM-Timer IO Port: 0x808 (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0] (XEN) ACPI: wakeup_vec[bf6c600c], vec_size[20] (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) (XEN) Processor #0 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) (XEN) Processor #2 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) (XEN) Processor #4 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) (XEN) Processor #6 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) (XEN) Processor #1 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) (XEN) Processor #3 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) (XEN) Processor #5 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) (XEN) Processor #7 7:14 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x28] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x29] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x2a] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x2b] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x2c] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x2d] disabled) (XEN) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x2e] disabled) (XEN) ACPI: LAPIC (acpi_id[0x10] lapic_id[0x2f] disabled) (XEN) ACPI: LAPIC (acpi_id[0x11] lapic_id[0x30] disabled) (XEN) ACPI: LAPIC (acpi_id[0x12] lapic_id[0x31] disabled) (XEN) ACPI: LAPIC (acpi_id[0x13] lapic_id[0x32] disabled) (XEN) ACPI: LAPIC (acpi_id[0x14] lapic_id[0x33] disabled) (XEN) ACPI: LAPIC (acpi_id[0x15] lapic_id[0x34] disabled) (XEN) ACPI: LAPIC (acpi_id[0x16] lapic_id[0x35] disabled) (XEN) ACPI: LAPIC (acpi_id[0x17] lapic_id[0x36] disabled) (XEN) ACPI: LAPIC (acpi_id[0x18] lapic_id[0x37] disabled) (XEN) ACPI: LAPIC (acpi_id[0x19] lapic_id[0x38] disabled) (XEN) ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x39] disabled) (XEN) ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x3a] disabled) (XEN) ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x3b] disabled) (XEN) ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3c] disabled) (XEN) ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3d] disabled) (XEN) ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled) (XEN) ACPI: LAPIC (acpi_id[0x20] lapic_id[0x3f] disabled) (XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) (XEN) ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000 (XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 (XEN) PCI: MCFG area at e0000000 reserved in E820 (XEN) ERST table is invalid (XEN) Using ACPI (MADT) for SMP configuration information (XEN) IRQ limits: 24 GSI, 1528 MSI/MSI-X (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 2660.049 MHz processor. (XEN) Initing memory sharing. (XEN) mce_intel.c:1162: MCA Capability: BCAST 1 SER 0 CMCI 1 firstbank 0 extended MCE MSR 0 (XEN) Intel machine check reporting enabled (XEN) Intel VT-d Snoop Control enabled. (XEN) Intel VT-d Dom0 DMA Passthrough not enabled. (XEN) Intel VT-d Queued Invalidation enabled. (XEN) Intel VT-d Interrupt Remapping not enabled. (XEN) I/O virtualisation enabled (XEN) - Dom0 mode: Relaxed (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 (XEN) Platform timer is 14.318MHz HPET XEN) Allocated console ring of 64 KiB. (XEN) VMX: Supported advanced features: (XEN) - APIC MMIO access virtualisation (XEN) - APIC TPR shadow (XEN) - Extended Page Tables (EPT) (XEN) - Virtual-Processor Identifiers (VPID) (XEN) - Virtual NMI (XEN) - MSR direct-access bitmap (XEN) EPT supports 2MB super page. (XEN) HVM: ASIDs enabled. (XEN) HVM: VMX enabled (XEN) HVM: Hardware Assisted Paging detected. (XEN) Brought up 8 CPUs (XEN) HPET: 8 timers in total, 8 timers will be used for broadcast (XEN) ACPI sleep modes: S3 (XEN) mcheck_poll: Machine check polling timer started. (XEN) *** LOADING DOMAIN 0 *** (XEN) elf_parse_binary: phdr: paddr=0x1000000 memsz=0x404000 (XEN) elf_parse_binary: phdr: paddr=0x1404000 memsz=0x850d0 (XEN) elf_parse_binary: phdr: paddr=0x148a000 memsz=0x888 (XEN) elf_parse_binary: phdr: paddr=0x148b000 memsz=0x14e98 (XEN) elf_parse_binary: phdr: paddr=0x14a0000 memsz=0x268000 (XEN) elf_parse_binary: memory: 0x1000000 -> 0x1708000 (XEN) elf_xen_parse_note: GUEST_OS = "linux" (XEN) elf_xen_parse_note: GUEST_VERSION = "2.6" (XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0" (XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000 (XEN) elf_xen_parse_note: ENTRY = 0xffffffff814a0200 (XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81009000 (XEN) elf_xen_parse_note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb" (XEN) elf_xen_parse_note: PAE_MODE = "yes" (XEN) elf_xen_parse_note: LOADER = "generic" (XEN) elf_xen_parse_note: unknown xen elf note (0xd) (XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1 (XEN) elf_xen_parse_note: HV_START_LOW = 0xffff800000000000 (XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0 (XEN) elf_xen_addr_calc_check: addresses: (XEN) virt_base = 0xffffffff80000000 (XEN) elf_paddr_offset = 0x0 (XEN) virt_offset = 0xffffffff80000000 (XEN) virt_kstart = 0xffffffff81000000 (XEN) virt_kend = 0xffffffff81708000 (XEN) virt_entry = 0xffffffff814a0200 (XEN) p2m_base = 0xffffffffffffffff (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1708000 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 0000000234000000->0000000238000000 (2012036 pages to be allocated) (XEN) Init. ramdisk: 000000023ed28000->000000023ffffa00 (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff81000000->ffffffff81708000 (XEN) Init. ramdisk: ffffffff81708000->ffffffff829dfa00 (XEN) Phys-Mach map: ffffffff829e0000->ffffffff839632e0 (XEN) Start info: ffffffff83964000->ffffffff839644b4 (XEN) Page tables: ffffffff83965000->ffffffff83986000 (XEN) Boot stack: ffffffff83986000->ffffffff83987000 (XEN) TOTAL: ffffffff80000000->ffffffff83c00000 (XEN) ENTRY ADDRESS: ffffffff814a0200 (XEN) Dom0 has maximum 8 VCPUs (XEN) elf_load_binary: phdr 0 at 0xffffffff81000000 -> 0xffffffff81404000 (XEN) elf_load_binary: phdr 1 at 0xffffffff81404000 -> 0xffffffff814890d0 (XEN) elf_load_binary: phdr 2 at 0xffffffff8148a000 -> 0xffffffff8148a888 (XEN) elf_load_binary: phdr 3 at 0xffffffff8148b000 -> 0xffffffff8149fe98 (XEN) elf_load_binary: phdr 4 at 0xffffffff814a0000 -> 0xffffffff81530000 (XEN) Scrubbing Free RAM: .done. (XEN) Xen trace buffers: disabled (XEN) Std. Loglevel: All (XEN) Guest Loglevel: All (XEN) Xen is relinquishing VGA console. (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 228kB init memory. mapping kernel into physical memory Xen: setup ISA identity maps about to get started... (XEN) PCI add device 00:00.0 (XEN) PCI add device 00:03.0 (XEN) PCI add device 00:05.0 (XEN) PCI add device 00:08.0 (XEN) PCI add device 00:08.1 (XEN) PCI add device 00:08.2 (XEN) PCI add device 00:08.3 (XEN) PCI add device 00:10.0 (XEN) PCI add device 00:10.1 (XEN) PCI add device 00:1a.0 (XEN) PCI add device 00:1c.0 (XEN) PCI add device 00:1c.4 (XEN) PCI add device 00:1d.0 (XEN) PCI add device 00:1e.0 (XEN) PCI add device 00:1f.0 (XEN) PCI add device 00:1f.2 (XEN) PCI add device 00:1f.5 (XEN) PCI add device 03:00.0 (XEN) PCI add device 02:00.0 (XEN) PCI add device 02:00.1 (XEN) PCI add device 01:03.0 (XEN) *** Serial input -> Xen (type 'CTRL-a' three times to switch input to DOM0) (XEN) ==== PCI devices ==== (XEN) ff:05.3 - dom 0 - MSIs < > (XEN) ff:05.2 - dom 0 - MSIs < > (XEN) ff:05.1 - dom 0 - MSIs < > (XEN) ff:05.0 - dom 0 - MSIs < > (XEN) ff:04.3 - dom 0 - MSIs < > (XEN) ff:04.2 - dom 0 - MSIs < > (XEN) ff:04.1 - dom 0 - MSIs < > (XEN) ff:04.0 - dom 0 - MSIs < > (XEN) ff:03.4 - dom 0 - MSIs < > (XEN) ff:03.2 - dom 0 - MSIs < > (XEN) ff:03.1 - dom 0 - MSIs < > (XEN) ff:03.0 - dom 0 - MSIs < > (XEN) ff:02.1 - dom 0 - MSIs < > (XEN) ff:02.0 - dom 0 - MSIs < > (XEN) ff:00.1 - dom 0 - MSIs < > (XEN) ff:00.0 - dom 0 - MSIs < > (XEN) 03:00.0 - dom 0 - MSIs < > (XEN) 02:00.1 - dom 0 - MSIs < > (XEN) 02:00.0 - dom 0 - MSIs < > (XEN) 01:03.0 - dom 0 - MSIs < > (XEN) 00:1f.5 - dom 0 - MSIs < > (XEN) 00:1f.2 - dom 0 - MSIs < > (XEN) 00:1f.0 - dom 0 - MSIs < > (XEN) 00:1e.0 - dom 0 - MSIs < > (XEN) 00:1d.0 - dom 0 - MSIs < > (XEN) 00:1c.4 - dom 0 - MSIs < 36 > (XEN) 00:1c.0 - dom 0 - MSIs < 35 > (XEN) 00:1a.0 - dom 0 - MSIs < > (XEN) 00:10.1 - dom 0 - MSIs < > (XEN) 00:10.0 - dom 0 - MSIs < > (XEN) 00:08.3 - dom 0 - MSIs < > (XEN) 00:08.2 - dom 0 - MSIs < > (XEN) 00:08.1 - dom 0 - MSIs < > (XEN) 00:08.0 - dom 0 - MSIs < > (XEN) 00:05.0 - dom 0 - MSIs < 34 > (XEN) 00:03.0 - dom 0 - MSIs < 33 > (XEN) 00:00.0 - dom 0 - MSIs < > [disconnect] Script done on Thu 24 Mar 2011 16:30:23 GMT --=-Upzeh1WEkdUs2ndx2NRz Content-Disposition: attachment; filename="dmidecode.out" Content-Type: text/plain; name="dmidecode.out"; charset="UTF-8" Content-Transfer-Encoding: 7bit # dmidecode 2.9 SMBIOS 2.6 present. 66 structures occupying 3175 bytes. Table at 0xBF79C000. Handle 0xDA00, DMI type 218, 11 bytes OEM-specific Type Header and Data: DA 0B 00 DA B2 00 17 00 0E 20 00 Handle 0x0000, DMI type 0, 24 bytes BIOS Information Vendor: Dell Inc. Version: 1.1.5 Release Date: 05/24/2010 Address: 0xF0000 Runtime Size: 64 kB ROM Size: 4096 kB Characteristics: ISA is supported PCI is supported PNP is supported BIOS is upgradeable BIOS shadowing is allowed Boot from CD is supported Selectable boot is supported EDD is supported Japanese floppy for Toshiba 1.2 MB is supported (int 13h) 5.25"/360 KB floppy services are supported (int 13h) 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 KB floppy services are supported (int 13h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported BIOS boot specification is supported Function key-initiated network boot is supported Targeted content distribution is supported BIOS Revision: 1.1 Handle 0x0100, DMI type 1, 27 bytes System Information Manufacturer: Dell Inc. Product Name: PowerEdge R310 Version: Not Specified Serial Number: 7V8CW4J UUID: 44454C4C-5600-1038-8043-B7C04F57344A Wake-up Type: Power Switch SKU Number: Not Specified Family: Not Specified Handle 0x0200, DMI type 2, 9 bytes Base Board Information Manufacturer: Dell Inc. Product Name: 05XKKK Version: A00 Serial Number: ..CN1374008H00Q0. Handle 0x0300, DMI type 3, 21 bytes Chassis Information Manufacturer: Dell Inc. Type: Rack Mount Chassis Lock: Present Version: Not Specified Serial Number: 7V8CW4J Asset Tag: Not Specified Boot-up State: Safe Power Supply State: Safe Thermal State: Safe Security Status: Unknown OEM Information: 0x00000000 Height: 1 U Number Of Power Cords: Unspecified Contained Elements: 0 Handle 0x0400, DMI type 4, 40 bytes Processor Information Socket Designation: CPU1 Type: Central Processor Family: Xeon Manufacturer: Intel ID: E5 06 01 00 FF FB EB BF Signature: Type 0, Family 6, Model 30, Stepping 5 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) DS (Debug store) ACPI (ACPI supported) MMX (MMX technology supported) FXSR (Fast floating-point save and restore) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) SS (Self-snoop) HTT (Hyper-threading technology) TM (Thermal monitor supported) PBE (Pending break enabled) Version: Intel(R) Xeon(R) CPU X3450 @ 2.67GHz Voltage: 1.2 V External Clock: 4800 MHz Max Speed: 3600 MHz Current Speed: 2666 MHz Status: Populated, Enabled Upgrade: L1 Cache Handle: 0x0700 L2 Cache Handle: 0x0701 L3 Cache Handle: 0x0702 Serial Number: Not Specified Asset Tag: Not Specified Part Number: Not Specified Core Count: 4 Core Enabled: 4 Thread Count: 8 Characteristics: 64-bit capable Handle 0x0700, DMI type 7, 19 bytes Cache Information Socket Designation: Not Specified Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 128 KB Maximum Size: 128 KB Supported SRAM Types: Unknown Installed SRAM Type: Unknown Speed: Unknown Error Correction Type: Single-bit ECC System Type: Data Associativity: 8-way Set-associative Handle 0x0701, DMI type 7, 19 bytes Cache Information Socket Designation: Not Specified Configuration: Enabled, Not Socketed, Level 2 Operational Mode: Write Back Location: Internal Installed Size: 1024 KB Maximum Size: 2048 KB Supported SRAM Types: Unknown Installed SRAM Type: Unknown Speed: Unknown Error Correction Type: Single-bit ECC System Type: Unified Associativity: 8-way Set-associative Handle 0x0702, DMI type 7, 19 bytes Cache Information Socket Designation: Not Specified Configuration: Enabled, Not Socketed, Level 3 Operational Mode: Write Back Location: Internal Installed Size: 8192 KB Maximum Size: 8192 KB Supported SRAM Types: Unknown Installed SRAM Type: Unknown Speed: Unknown Error Correction Type: Single-bit ECC System Type: Unified Associativity: 16-way Set-associative Handle 0x0800, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: Not Specified External Connector Type: DB-15 female Port Type: Video Port Handle 0x0801, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: Not Specified External Connector Type: DB-15 female Port Type: Video Port Handle 0x0802, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: Not Specified External Connector Type: Access Bus (USB) Port Type: USB Handle 0x0803, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: Not Specified External Connector Type: Access Bus (USB) Port Type: USB Handle 0x0804, DMI type 126, 9 bytes Inactive Handle 0x0805, DMI type 126, 9 bytes Inactive Handle 0x0806, DMI type 126, 9 bytes Inactive Handle 0x0807, DMI type 126, 9 bytes Inactive Handle 0x0808, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: Not Specified External Connector Type: Access Bus (USB) Port Type: USB Handle 0x0809, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: Not Specified External Connector Type: Access Bus (USB) Port Type: USB Handle 0x080A, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: INT_USB1 Internal Connector Type: Access Bus (USB) External Reference Designator: Not Specified External Connector Type: None Port Type: USB Handle 0x080B, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: INT_USB2 Internal Connector Type: Access Bus (USB) External Reference Designator: Not Specified External Connector Type: None Port Type: USB Handle 0x080C, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: INT_SATA1 Internal Connector Type: SAS/SATA Plug Receptacle External Reference Designator: Not Specified External Connector Type: None Port Type: SATA Handle 0x080D, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: INT_SATA2 Internal Connector Type: SAS/SATA Plug Receptacle External Reference Designator: Not Specified External Connector Type: None Port Type: SATA Handle 0x080E, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: INT_SATA3 Internal Connector Type: SAS/SATA Plug Receptacle External Reference Designator: Not Specified External Connector Type: None Port Type: SATA Handle 0x080F, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: INT_SATA4 Internal Connector Type: SAS/SATA Plug Receptacle External Reference Designator: Not Specified External Connector Type: None Port Type: SATA Handle 0x0810, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: INT_SATA5 Internal Connector Type: SAS/SATA Plug Receptacle External Reference Designator: Not Specified External Connector Type: None Port Type: SATA Handle 0x0811, DMI type 126, 9 bytes Inactive Handle 0x0812, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: Not Specified External Connector Type: RJ-45 Port Type: Network Port Handle 0x0813, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: Not Specified External Connector Type: RJ-45 Port Type: Network Port Handle 0x0814, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: Not Specified Internal Connector Type: None External Reference Designator: Not Specified External Connector Type: DB-9 male Port Type: Serial Port 16550A Compatible Handle 0x0900, DMI type 9, 17 bytes System Slot Information Designation: PCIE1 Type: x8 Current Usage: Available Length: Long Characteristics: 3.3 V is provided PME signal is supported Handle 0x0901, DMI type 9, 17 bytes System Slot Information Designation: PCIE2 Type: x8 Current Usage: Available Length: Long Characteristics: 3.3 V is provided PME signal is supported Handle 0x0902, DMI type 126, 17 bytes Inactive Handle 0x0903, DMI type 126, 17 bytes Inactive Handle 0x0904, DMI type 126, 17 bytes Inactive Handle 0x0A00, DMI type 10, 12 bytes On Board Device 1 Information Type: Video Status: Enabled Description: Embedded Matrox G200 Video On Board Device 2 Information Type: Ethernet Status: Enabled Description: Embedded Broadcom 5716 NIC 1 On Board Device 3 Information Type: Ethernet Status: Enabled Description: Embedded Broadcom 5716 NIC 2 On Board Device 4 Information Type: SAS Controller Status: Enabled Description: Integrated SAS Controller Handle 0x0B00, DMI type 11, 5 bytes OEM Strings String 1: Dell System String 2: 5[0000] Handle 0x7E00, DMI type 126, 170 bytes Inactive Handle 0x0C00, DMI type 12, 5 bytes System Configuration Options Option 1: NVRAM_CLR: Clear user settable NVRAM areas and set defaults Option 2: PWRD_EN: Close to enable password Handle 0x0D00, DMI type 13, 22 bytes BIOS Language Information Installable Languages: 1 en|US|iso8859-1 Currently Installed Language: en|US|iso8859-1 Handle 0x1000, DMI type 16, 15 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: Multi-bit ECC Maximum Capacity: 32 GB Error Information Handle: Not Provided Number Of Devices: 6 Handle 0x1100, DMI type 17, 28 bytes Memory Device Array Handle: 0x1000 Error Information Handle: Not Provided Total Width: 72 bits Data Width: 64 bits Size: 2048 MB Form Factor: DIMM Set: 1 Locator: DIMM_A1 Bank Locator: Not Specified Type: Type Detail: Synchronous Speed: 1333 MHz (0.8 ns) Manufacturer: 00AD000080AD Serial Number: 0FA35777 Asset Tag: 01103000 Part Number: HMT125U7TFR8C-H9 Handle 0x1101, DMI type 17, 28 bytes Memory Device Array Handle: 0x1000 Error Information Handle: Not Provided Total Width: 72 bits Data Width: 64 bits Size: 2048 MB Form Factor: DIMM Set: 1 Locator: DIMM_A2 Bank Locator: Not Specified Type: Type Detail: Synchronous Speed: 1333 MHz (0.8 ns) Manufacturer: 00AD000080AD Serial Number: 0F635782 Asset Tag: 01103000 Part Number: HMT125U7TFR8C-H9 Handle 0x1102, DMI type 17, 28 bytes Memory Device Array Handle: 0x1000 Error Information Handle: Not Provided Total Width: 72 bits Data Width: 64 bits Size: 2048 MB Form Factor: DIMM Set: 2 Locator: DIMM_A3 Bank Locator: Not Specified Type: Type Detail: Synchronous Speed: 1333 MHz (0.8 ns) Manufacturer: 00AD000080AD Serial Number: 0F23577E Asset Tag: 01103000 Part Number: HMT125U7TFR8C-H9 Handle 0x1103, DMI type 17, 28 bytes Memory Device Array Handle: 0x1000 Error Information Handle: Not Provided Total Width: 72 bits Data Width: 64 bits Size: 2048 MB Form Factor: DIMM Set: 2 Locator: DIMM_A4 Bank Locator: Not Specified Type: Type Detail: Synchronous Speed: 1333 MHz (0.8 ns) Manufacturer: 00AD000080AD Serial Number: 0F535115 Asset Tag: 01103000 Part Number: HMT125U7TFR8C-H9 Handle 0x1104, DMI type 17, 28 bytes Memory Device Array Handle: 0x1000 Error Information Handle: Not Provided Total Width: 72 bits Data Width: 64 bits Size: No Module Installed Form Factor: DIMM Set: 3 Locator: DIMM_A5 Bank Locator: Not Specified Type: Type Detail: Synchronous Speed: Unknown Manufacturer: Serial Number: Asset Tag: Part Number: Handle 0x1105, DMI type 17, 28 bytes Memory Device Array Handle: 0x1000 Error Information Handle: Not Provided Total Width: 72 bits Data Width: 64 bits Size: No Module Installed Form Factor: DIMM Set: 3 Locator: DIMM_A6 Bank Locator: Not Specified Type: Type Detail: Synchronous Speed: Unknown Manufacturer: Serial Number: Asset Tag: Part Number: Handle 0x1300, DMI type 19, 15 bytes Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x000BFFFFFFF Range Size: 3 GB Physical Array Handle: 0x1000 Partition Width: 0 Handle 0x1301, DMI type 19, 15 bytes Memory Array Mapped Address Starting Address: 0x00100000000 Ending Address: 0x0023FFFFFFF Range Size: 5 GB Physical Array Handle: 0x1000 Partition Width: 0 Handle 0x2000, DMI type 32, 11 bytes System Boot Information Status: No errors detected Handle 0x2600, DMI type 38, 18 bytes IPMI Device Information Interface Type: KCS (Keyboard Control Style) Specification Version: 2.0 I2C Slave Address: 0x10 NV Storage Device: Not Present Base Address: 0x0000000000000CA8 (I/O) Register Spacing: 32-bit Boundaries Handle 0x2900, DMI type 41, 11 bytes Unknown Type Header and Data: 29 0B 00 29 01 85 01 00 00 02 00 Strings: Embedded NIC 1 Handle 0x2901, DMI type 41, 11 bytes Unknown Type Header and Data: 29 0B 01 29 01 85 02 00 00 02 01 Strings: Embedded NIC 2 Handle 0x2902, DMI type 41, 11 bytes Unknown Type Header and Data: 29 0B 02 29 01 8A 04 00 00 03 00 Strings: Integrated SAS Handle 0x2903, DMI type 126, 11 bytes Inactive Handle 0x2904, DMI type 41, 11 bytes Unknown Type Header and Data: 29 0B 04 29 01 83 04 00 00 01 18 Strings: Embedded Video Handle 0xD000, DMI type 208, 16 bytes OEM-specific Type Header and Data: D0 10 00 D0 02 00 FE 00 A3 02 00 00 00 01 00 00 Handle 0xD200, DMI type 210, 12 bytes OEM-specific Type Header and Data: D2 0C 00 D2 F8 03 04 03 06 80 04 05 Handle 0xD400, DMI type 212, 87 bytes OEM-specific Type Header and Data: D4 57 00 D4 70 00 71 00 00 10 2D 2E 42 00 11 FE 01 43 00 11 FE 00 70 01 11 9F 20 6F 01 11 9F 00 00 00 11 9F 20 00 00 11 9F 00 31 40 11 FB 00 32 40 11 FB 04 9D 00 11 FD 02 9E 00 11 FD 00 9F 00 26 FE 01 A0 00 26 FE 00 28 40 26 DF 20 29 40 26 DF 00 FF FF 00 00 00 Handle 0xD401, DMI type 212, 242 bytes OEM-specific Type Header and Data: D4 F2 01 D4 70 00 71 00 03 40 5A 6D 5C 00 78 BF 40 5D 00 78 BF 00 6C 01 57 FC 00 6B 01 57 FC 01 6A 01 57 FC 02 12 02 57 EF 00 11 02 57 EF 10 77 01 54 FC 00 78 01 54 FC 01 79 01 54 FC 02 7A 01 54 FC 03 33 40 54 CF 00 34 40 54 CF 10 35 40 54 CF 20 36 40 54 CF 30 1A 40 54 FB 04 1B 40 54 FB 00 1C 40 54 F7 08 1D 40 54 F7 00 43 40 58 DF 20 42 40 58 DF 00 24 40 58 BF 40 25 40 58 BF 00 6E 00 58 FC 01 2D 00 58 FC 02 DA 01 58 FC 03 22 40 58 EF 10 23 40 58 EF 00 BB 00 58 F3 04 BC 00 58 F3 08 DB 01 58 F3 0C 2D 02 55 FE 01 2E 02 55 FE 00 D8 00 55 7F 80 D9 00 55 7F 00 54 02 56 DF 00 57 02 56 DF 20 4D 02 56 BF 00 4E 02 56 BF 40 2D 01 56 7F 80 2E 01 56 7F 00 00 C0 5C 00 0A 03 C0 67 00 05 83 00 76 00 00 84 00 77 00 00 FF FF 00 00 00 Handle 0xD402, DMI type 212, 172 bytes OEM-specific Type Header and Data: D4 AC 02 D4 72 00 73 00 00 40 5D 5E D3 00 00 00 02 D4 00 02 00 02 4A 01 46 BF 40 4B 01 46 BF 00 00 90 2C 00 00 01 90 2D 00 00 DE 00 63 FE 01 26 40 42 FE 01 27 40 42 FE 00 17 01 4A FE 00 18 01 4A FE 01 19 01 4A FD 00 1A 01 4A FD 02 1B 01 4A FB 00 1C 01 4A FB 04 1D 01 4A F7 00 1E 01 4A F7 08 1F 01 44 FE 00 20 01 44 FE 01 00 00 44 FD 00 00 00 44 FD 02 35 01 4B FC 00 37 01 4B FC 01 39 01 4B FC 02 3B 01 4B F3 04 02 40 46 DF 00 01 40 46 DF 20 FC 01 45 BF 00 FD 01 45 BF 40 00 00 45 7F 80 00 00 45 7F 00 FF FF 00 00 00 Handle 0xD403, DMI type 212, 97 bytes OEM-specific Type Header and Data: D4 61 03 D4 72 00 73 00 00 40 5D 5E D1 00 46 FE 00 D2 00 46 FE 01 40 01 47 EF 10 41 01 47 EF 00 EB 01 47 FD 00 EA 01 47 FD 02 33 02 47 F3 04 32 02 47 F3 08 31 02 47 F3 00 6E 02 47 F3 00 4B 02 47 DF 00 4C 02 47 DF 20 44 01 4E CF 00 45 01 4E CF 10 4A 02 4E F3 04 0C 80 4E F3 08 FF FF 00 00 00 Handle 0xD800, DMI type 216, 9 bytes OEM-specific Type Header and Data: D8 09 00 D8 01 02 01 00 00 Strings: MATROX VGA/VBE BIOS, Version V3.8WO Handle 0xDE00, DMI type 222, 16 bytes OEM-specific Type Header and Data: DE 10 00 DE 01 08 FF FF 00 00 00 00 00 00 00 01 Handle 0xE100, DMI type 225, 33 bytes OEM-specific Type Header and Data: E1 21 00 E1 01 01 00 04 00 02 00 11 00 03 01 11 00 04 02 11 00 05 03 11 00 06 04 11 00 07 05 11 00 Strings: CPU.Socket.1 DIMM.Socket.A1 DIMM.Socket.A2 DIMM.Socket.A3 DIMM.Socket.A4 DIMM.Socket.A5 DIMM.Socket.A6 Handle 0x7F00, DMI type 127, 4 bytes End Of Table --=-Upzeh1WEkdUs2ndx2NRz Content-Disposition: attachment; filename="lspci.out" Content-Type: text/plain; name="lspci.out"; charset="UTF-8" Content-Transfer-Encoding: 7bit 00:00.0 Host bridge: Intel Corporation Clarksfield/Lynnfield DMI (rev 11) Subsystem: Dell Device 02a3 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Capabilities: [150] Access Controls Capabilities: [160] Vendor Specific Information 00:03.0 PCI bridge: Intel Corporation Clarksfield/Lynnfield PCI Express Root Port 1 (rev 11) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Subsystem: Dell Device 02a3 Capabilities: [60] Message Signalled Interrupts: Mask+ 64bit- Queue=0/1 Enable+ Address: feeff00c Data: 4151 Masking: 00000002 Pending: 00000000 Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag+ RBE+ FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #1, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 <512ns, L1 <4us ClockPM- Suprise+ LLActRep+ BwNot+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled+ Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise- Slot # 1, PowerLimit 25.000000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd Off, Power+ Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [e0] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Advanced Error Reporting Capabilities: [150] Access Controls Capabilities: [160] Vendor Specific Information Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:05.0 PCI bridge: Intel Corporation Clarksfield/Lynnfield PCI Express Root Port 3 (rev 11) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Subsystem: Dell Device 02a3 Capabilities: [60] Message Signalled Interrupts: Mask+ 64bit- Queue=0/1 Enable+ Address: feeff00c Data: 4159 Masking: 00000002 Pending: 00000000 Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag+ RBE+ FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #3, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 <512ns, L1 <4us ClockPM- Suprise+ LLActRep+ BwNot+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled+ Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise- Slot # 2, PowerLimit 25.000000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Off, PwrInd Off, Power+ Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [e0] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Advanced Error Reporting Capabilities: [150] Access Controls Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:08.0 System peripheral: Intel Corporation Clarksfield/Lynnfield System Management Registers (rev 11) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 00:08.1 System peripheral: Intel Corporation Clarksfield/Lynnfield Semaphore and Scratchpad Registers (rev 11) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 00:08.2 System peripheral: Intel Corporation Clarksfield/Lynnfield System Control and Status Registers (rev 11) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 00:08.3 System peripheral: Intel Corporation Clarksfield/Lynnfield Miscellaneous Registers (rev 11) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1c.0 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 1 (rev 05) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v2) Root Port (Slot-), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <256ns, L1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: feeff00c Data: 4161 Capabilities: [90] Subsystem: Dell Device 02a3 Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.4 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 5 (rev 05) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v2) Root Port (Slot-), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #5, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <256ns, L1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Address: feeff00c Data: 4169 Capabilities: [90] Subsystem: Dell Device 02a3 Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1d.0 USB Controller: Intel Corporation Ibex Peak USB2 Enhanced Host Controller (rev 05) (prog-if 20 [EHCI]) Subsystem: Dell Device 02a3 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a5) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Subsystem: Dell Device 02a3 00:1f.0 ISA bridge: Intel Corporation Ibex Peak LPC Interface Controller (rev 05) Subsystem: Dell Device 02a3 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- 00:1f.2 IDE interface: Intel Corporation Ibex Peak 4 port SATA IDE Controller (rev 05) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Dell Device 02a3 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Kernel driver in use: ata_piix Kernel modules: ata_generic, ata_piix, ide-pci-generic 00:1f.5 IDE interface: Intel Corporation Ibex Peak 2 port SATA IDE Controller (rev 05) (prog-if 85 [Master SecO PriO]) Subsystem: Dell Device 02a3 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Kernel driver in use: ata_piix Kernel modules: ata_generic, ata_piix, ide-pci-generic 01:03.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200eW WPCM450 [Hermon] - Winbond/Nuvoton (rev 0a) (prog-if 00 [VGA controller]) Subsystem: Dell Device 02a3 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/4 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [a0] MSI-X: Enable+ Mask- TabSize=9 Vector table: BAR=0 offset=0000c000 PBA: BAR=0 offset=0000e000 Capabilities: [ac] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+ RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <2us, L1 <2us ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100] Device Serial Number 2a-88-52-fe-ff-2b-2b-84 Capabilities: [110] Advanced Error Reporting Capabilities: [150] Power Budgeting Capabilities: [160] Virtual Channel Kernel driver in use: bnx2 Kernel modules: bnx2 02:00.1 Ethernet controller: Broadcom Corporation NetXtreme II BCM5716 Gigabit Ethernet (rev 20) Subsystem: Dell Device 02a3 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/4 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [a0] MSI-X: Enable- Mask- TabSize=9 Vector table: BAR=0 offset=0000c000 PBA: BAR=0 offset=0000e000 Capabilities: [ac] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+ RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <2us, L1 <2us ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100] Device Serial Number 2b-88-52-fe-ff-2b-2b-84 Capabilities: [110] Advanced Error Reporting Capabilities: [150] Power Budgeting Capabilities: [160] Virtual Channel Kernel driver in use: bnx2 Kernel modules: bnx2 03:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1068E PCI-Express Fusion-MPT SAS (rev 08) Subsystem: Dell SAS 6/iR Integrated Blades RAID Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Kernel driver in use: mptsas Kernel modules: mptsas --=-Upzeh1WEkdUs2ndx2NRz Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel --=-Upzeh1WEkdUs2ndx2NRz--