[PATCH v4 1/2] ata: pata_at91.c bugfix for initial_timing initialisation

[Igor Plyatov <plyatov@gmail.com>]

The "struct ata_timing" must contain 10 members, but ".dmack_hold" member was
forgotten for "initial_timing" initialisation. This patch fixes such a problem.

Signed-off-by: Igor Plyatov <plyatov@gmail.com>
---
 drivers/ata/pata_at91.c |   14 ++++++++++++--
 1 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c
index 0da0dcc..0267d54 100644
--- a/drivers/ata/pata_at91.c
+++ b/drivers/ata/pata_at91.c
@@ -49,8 +49,18 @@ struct at91_ide_info {
 	void __iomem *alt_addr;
 };
 
-static const struct ata_timing initial_timing =
-	{XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0};
+static const struct ata_timing initial_timing = {
+	.mode		= XFER_PIO_0,
+	.setup		= 70,
+	.act8b		= 290,
+	.rec8b		= 240,
+	.cyc8b		= 600,
+	.active		= 165,
+	.recover	= 150,
+	.dmack_hold	= 0,
+	.cycle		= 600,
+	.udma		= 0
+};
 
 static unsigned long calc_mck_cycles(unsigned long ns, unsigned long mck_hz)
 {
-- 
1.7.1