All of lore.kernel.org
 help / color / mirror / Atom feed
From: Joerg Roedel <joerg.roedel@amd.com>
To: <iommu@lists.linux-foundation.org>,
	Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: <linux-kernel@vger.kernel.org>, <linux-pci@vger.kernel.org>,
	Joerg Roedel <joerg.roedel@amd.com>
Subject: [PATCH 1/5] PCI: Move ATS declarations in seperate header file
Date: Fri, 8 Apr 2011 10:17:06 +0200	[thread overview]
Message-ID: <1302250630-8183-2-git-send-email-joerg.roedel@amd.com> (raw)
In-Reply-To: <1302250630-8183-1-git-send-email-joerg.roedel@amd.com>

This patch moves the relevant declarations from the local
header file in drivers/pci to a more accessible locations so
that it can be used by the AMD IOMMU driver too.
The file is named pci-ats-pri.h because support for the PCI
PRI capability will also be added there in a later
patch-set.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
---
 drivers/pci/intel-iommu.c |    1 +
 drivers/pci/iov.c         |    1 +
 drivers/pci/pci.h         |   37 --------------------------------
 include/linux/pci-ats.h   |   52 +++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 54 insertions(+), 37 deletions(-)
 create mode 100644 include/linux/pci-ats.h

diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index 7da3bef..fdb2cef 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -39,6 +39,7 @@
 #include <linux/syscore_ops.h>
 #include <linux/tboot.h>
 #include <linux/dmi.h>
+#include <linux/pci-ats.h>
 #include <asm/cacheflush.h>
 #include <asm/iommu.h>
 #include "pci.h"
diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
index 553d8ee..42fae47 100644
--- a/drivers/pci/iov.c
+++ b/drivers/pci/iov.c
@@ -13,6 +13,7 @@
 #include <linux/mutex.h>
 #include <linux/string.h>
 #include <linux/delay.h>
+#include <linux/pci-ats.h>
 #include "pci.h"
 
 #define VIRTFN_ID_LEN	16
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index a6ec200..4020025 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -250,15 +250,6 @@ struct pci_sriov {
 	u8 __iomem *mstate;	/* VF Migration State Array */
 };
 
-/* Address Translation Service */
-struct pci_ats {
-	int pos;	/* capability position */
-	int stu;	/* Smallest Translation Unit */
-	int qdep;	/* Invalidate Queue Depth */
-	int ref_cnt;	/* Physical Function reference count */
-	unsigned int is_enabled:1;	/* Enable bit is set */
-};
-
 #ifdef CONFIG_PCI_IOV
 extern int pci_iov_init(struct pci_dev *dev);
 extern void pci_iov_release(struct pci_dev *dev);
@@ -269,19 +260,6 @@ extern resource_size_t pci_sriov_resource_alignment(struct pci_dev *dev,
 extern void pci_restore_iov_state(struct pci_dev *dev);
 extern int pci_iov_bus_range(struct pci_bus *bus);
 
-extern int pci_enable_ats(struct pci_dev *dev, int ps);
-extern void pci_disable_ats(struct pci_dev *dev);
-extern int pci_ats_queue_depth(struct pci_dev *dev);
-/**
- * pci_ats_enabled - query the ATS status
- * @dev: the PCI device
- *
- * Returns 1 if ATS capability is enabled, or 0 if not.
- */
-static inline int pci_ats_enabled(struct pci_dev *dev)
-{
-	return dev->ats && dev->ats->is_enabled;
-}
 #else
 static inline int pci_iov_init(struct pci_dev *dev)
 {
@@ -304,21 +282,6 @@ static inline int pci_iov_bus_range(struct pci_bus *bus)
 	return 0;
 }
 
-static inline int pci_enable_ats(struct pci_dev *dev, int ps)
-{
-	return -ENODEV;
-}
-static inline void pci_disable_ats(struct pci_dev *dev)
-{
-}
-static inline int pci_ats_queue_depth(struct pci_dev *dev)
-{
-	return -ENODEV;
-}
-static inline int pci_ats_enabled(struct pci_dev *dev)
-{
-	return 0;
-}
 #endif /* CONFIG_PCI_IOV */
 
 static inline resource_size_t pci_resource_alignment(struct pci_dev *dev,
diff --git a/include/linux/pci-ats.h b/include/linux/pci-ats.h
new file mode 100644
index 0000000..655824f
--- /dev/null
+++ b/include/linux/pci-ats.h
@@ -0,0 +1,52 @@
+#ifndef LINUX_PCI_ATS_H
+#define LINUX_PCI_ATS_H
+
+/* Address Translation Service */
+struct pci_ats {
+	int pos;        /* capability position */
+	int stu;        /* Smallest Translation Unit */
+	int qdep;       /* Invalidate Queue Depth */
+	int ref_cnt;    /* Physical Function reference count */
+	unsigned int is_enabled:1;      /* Enable bit is set */
+};
+
+#ifdef CONFIG_PCI_IOV
+
+extern int pci_enable_ats(struct pci_dev *dev, int ps);
+extern void pci_disable_ats(struct pci_dev *dev);
+extern int pci_ats_queue_depth(struct pci_dev *dev);
+/**
+ * pci_ats_enabled - query the ATS status
+ * @dev: the PCI device
+ *
+ * Returns 1 if ATS capability is enabled, or 0 if not.
+ */
+static inline int pci_ats_enabled(struct pci_dev *dev)
+{
+	return dev->ats && dev->ats->is_enabled;
+}
+
+#else /* CONFIG_PCI_IOV */
+
+static inline int pci_enable_ats(struct pci_dev *dev, int ps)
+{
+	return -ENODEV;
+}
+
+static inline void pci_disable_ats(struct pci_dev *dev)
+{
+}
+
+static inline int pci_ats_queue_depth(struct pci_dev *dev)
+{
+	return -ENODEV;
+}
+
+static inline int pci_ats_enabled(struct pci_dev *dev)
+{
+	return 0;
+}
+
+#endif /* CONFIG_PCI_IOV */
+
+#endif /* LINUX_PCI_ATS_H*/
-- 
1.7.1



  reply	other threads:[~2011-04-08  8:18 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-04-08  8:17 [PATCH 0/5] ATS support for AMD IOMMU driver Joerg Roedel
2011-04-08  8:17 ` Joerg Roedel [this message]
2011-04-08 15:25   ` [PATCH 1/5] PCI: Move ATS declarations in seperate header file Jesse Barnes
2011-04-08 18:33   ` Rolf Eike Beer
2011-04-11  6:20     ` Roedel, Joerg
2011-04-08  8:17 ` [PATCH 2/5] x86/amd-iommu: Select PCI_IOV with AMD IOMMU driver Joerg Roedel
2011-04-08  8:17 ` [PATCH 3/5] x86/amd-iommu: Flush device IOTLB if ATS is enabled Joerg Roedel
2011-04-08  8:17 ` [PATCH 4/5] x86/amd-iommu: Add flag to indicate IOTLB support Joerg Roedel
2011-04-08  8:17 ` [PATCH 5/5] x86/amd-iommu: Add ATS enable/disable code Joerg Roedel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1302250630-8183-2-git-send-email-joerg.roedel@amd.com \
    --to=joerg.roedel@amd.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=jbarnes@virtuousgeek.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.