All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sangbeom Kim <sbkim73@samsung.com>
To: alsa-devel@alsa-project.org, linux-samsung-soc@vger.kernel.org
Cc: jassisinghbrar@gmail.com, lrg@slimlogic.co.uk,
	broonie@opensource.wolfsonmicro.com, kgene.kim@samsung.com,
	Sangbeom Kim <sbkim73@samsung.com>
Subject: [PATCH 2/2] ASoC: SAMSUNG: Add WM8994 PCM Machine driver
Date: Mon, 25 Apr 2011 15:54:31 +0900	[thread overview]
Message-ID: <1303714472-2391-2-git-send-email-sbkim73@samsung.com> (raw)
In-Reply-To: <1303714472-2391-1-git-send-email-sbkim73@samsung.com>

This patch add WM8994 PCM machine driver to support PCM audio
on SMDKV310, SMDKC210 boards.
Playback and Capture supports 8kHz sampling rates.
and It is tested on SMDKV310, SMDKC210.

Signed-off-by: Sangbeom Kim <sbkim73@samsung.com>
---
 sound/soc/samsung/Kconfig          |    8 ++
 sound/soc/samsung/Makefile         |    2 +
 sound/soc/samsung/smdk_wm8994pcm.c |  175 ++++++++++++++++++++++++++++++++++++
 3 files changed, 185 insertions(+), 0 deletions(-)
 create mode 100644 sound/soc/samsung/smdk_wm8994pcm.c

diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig
index b8c7a2e..db2bc49 100644
--- a/sound/soc/samsung/Kconfig
+++ b/sound/soc/samsung/Kconfig
@@ -170,3 +170,11 @@ config SND_SOC_SMDK_WM8580_PCM
 	select SND_SAMSUNG_PCM
 	help
 	  Say Y if you want to add support for SoC audio on the SMDK.
+
+config SND_SOC_SMDK_WM8994_PCM
+	tristate "SoC PCM Audio support for WM8994 on SMDK"
+	depends on SND_SOC_SAMSUNG && (MACH_SMDKC210 || MACH_SMDKV310)
+	select SND_SOC_WM8994
+	select SND_SAMSUNG_PCM
+	help
+	  Say Y if you want to add support for SoC audio on the SMDK.
diff --git a/sound/soc/samsung/Makefile b/sound/soc/samsung/Makefile
index 6c598fc..4a3a428 100644
--- a/sound/soc/samsung/Makefile
+++ b/sound/soc/samsung/Makefile
@@ -35,6 +35,7 @@ snd-soc-s3c64xx-smartq-wm8987-objs := smartq_wm8987.o
 snd-soc-goni-wm8994-objs := goni_wm8994.o
 snd-soc-smdk-spdif-objs := smdk_spdif.o
 snd-soc-smdk-wm8580pcm-objs := smdk_wm8580pcm.o
+snd-soc-smdk-wm8994pcm-objs := smdk_wm8994pcm.o
 
 obj-$(CONFIG_SND_SOC_SAMSUNG_JIVE_WM8750) += snd-soc-jive-wm8750.o
 obj-$(CONFIG_SND_SOC_SAMSUNG_NEO1973_WM8753) += snd-soc-neo1973-wm8753.o
@@ -53,3 +54,4 @@ obj-$(CONFIG_SND_SOC_SMARTQ) += snd-soc-s3c64xx-smartq-wm8987.o
 obj-$(CONFIG_SND_SOC_SAMSUNG_SMDK_SPDIF) += snd-soc-smdk-spdif.o
 obj-$(CONFIG_SND_SOC_GONI_AQUILA_WM8994) += snd-soc-goni-wm8994.o
 obj-$(CONFIG_SND_SOC_SMDK_WM8580_PCM) += snd-soc-smdk-wm8580pcm.o
+obj-$(CONFIG_SND_SOC_SMDK_WM8994_PCM) += snd-soc-smdk-wm8994pcm.o
diff --git a/sound/soc/samsung/smdk_wm8994pcm.c b/sound/soc/samsung/smdk_wm8994pcm.c
new file mode 100644
index 0000000..756c228
--- /dev/null
+++ b/sound/soc/samsung/smdk_wm8994pcm.c
@@ -0,0 +1,175 @@
+/*
+ *  sound/soc/samsung/smdk_wm8994pcm.c
+ *
+ *  Copyright (c) 2011 Samsung Electronics Co. Ltd
+ *
+ *  This program is free software; you can redistribute  it and/or  modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+#include <sound/soc.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+
+#include "../codecs/wm8994.h"
+#include "dma.h"
+#include "pcm.h"
+
+/*
+ * Board Settings:
+ *  o '1' means 'ON'
+ *  o '0' means 'OFF'
+ *  o 'X' means 'Don't care'
+ *
+ * SMDKC210, SMDKV310: CFG3- 1001, CFG5-1000, CFG7-111111
+ */
+
+/*
+ * Configure audio route as :-
+ * $ amixer sset 'DAC1' on,on
+ * $ amixer sset 'Right Headphone Mux' 'DAC'
+ * $ amixer sset 'Left Headphone Mux' 'DAC'
+ * $ amixer sset 'DAC1R Mixer AIF1.1' on
+ * $ amixer sset 'DAC1L Mixer AIF1.1' on
+ * $ amixer sset 'IN2L' on
+ * $ amixer sset 'IN2L PGA IN2LN' on
+ * $ amixer sset 'MIXINL IN2L' on
+ * $ amixer sset 'AIF1ADC1L Mixer ADC/DMIC' on
+ * $ amixer sset 'IN2R' on
+ * $ amixer sset 'IN2R PGA IN2RN' on
+ * $ amixer sset 'MIXINR IN2R' on
+ * $ amixer sset 'AIF1ADC1R Mixer ADC/DMIC' on
+ */
+
+/* SMDK has a 16.9344MHZ crystal attached to WM8994 */
+#define SMDK_WM8994_FREQ 16934400
+
+static int smdk_wm8994_pcm_hw_params(struct snd_pcm_substream *substream,
+			      struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+	unsigned long mclk_freq;
+	int rfs, ret;
+
+	switch(params_rate(params)) {
+	case 8000:
+		rfs = 512;
+		break;
+	default:
+		printk(KERN_ERR "%s:%d Sampling Rate %u not supported!\n",
+		__func__, __LINE__, params_rate(params));
+		return -EINVAL;
+	}
+
+	mclk_freq = params_rate(params) * rfs;
+
+	/* Set the codec DAI configuration */
+	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_B
+				| SND_SOC_DAIFMT_IB_NF
+				| SND_SOC_DAIFMT_CBS_CFS);
+	if (ret < 0)
+		return ret;
+
+	/* Set the cpu DAI configuration */
+	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_DSP_B
+				| SND_SOC_DAIFMT_IB_NF
+				| SND_SOC_DAIFMT_CBS_CFS);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_dai_set_sysclk(codec_dai, WM8994_SYSCLK_FLL1,
+					mclk_freq, SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		return ret;
+
+	ret = snd_soc_dai_set_pll(codec_dai, WM8994_FLL1, WM8994_FLL_SRC_MCLK1,
+					SMDK_WM8994_FREQ, mclk_freq);
+	if (ret < 0)
+		return ret;
+
+	/* Set PCM source clock on CPU */
+	ret = snd_soc_dai_set_sysclk(cpu_dai, S3C_PCM_CLKSRC_MUX,
+					mclk_freq, SND_SOC_CLOCK_IN);
+	if (ret < 0)
+		return ret;
+
+	/* Set SCLK_DIV for making bclk */
+	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C_PCM_SCLK_PER_FS, rfs);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static struct snd_soc_ops smdk_wm8994_pcm_ops = {
+	.hw_params = smdk_wm8994_pcm_hw_params,
+};
+
+static struct snd_soc_dai_link smdk_dai[] = {
+	{
+		.name = "WM8994 PAIF PCM",
+		.stream_name = "Primary PCM",
+		.cpu_dai_name = "samsung-pcm.0",
+		.codec_dai_name = "wm8994-aif1",
+		.platform_name = "samsung-audio",
+		.codec_name = "wm8994-codec",
+		.ops = &smdk_wm8994_pcm_ops,
+	},
+};
+
+static struct snd_soc_card smdk_pcm = {
+	.name = "SMDK-PCM",
+	.dai_link = smdk_dai,
+	.num_links = 1,
+};
+
+static int __devinit snd_smdk_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+
+	smdk_pcm.dev = &pdev->dev;
+	ret = snd_soc_register_card(&smdk_pcm);
+	if (ret) {
+		dev_err(&pdev->dev, "snd_soc_register_card failed %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int __devexit snd_smdk_remove(struct platform_device *pdev)
+{
+	snd_soc_unregister_card(&smdk_pcm);
+	platform_set_drvdata(pdev, NULL);
+	return 0;
+}
+
+static struct platform_driver snd_smdk_driver = {
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = "samsung-smdk-pcm",
+	},
+	.probe = snd_smdk_probe,
+	.remove = __devexit_p(snd_smdk_remove),
+};
+
+static int __init smdk_audio_init(void)
+{
+	return platform_driver_register(&snd_smdk_driver);
+}
+
+module_init(smdk_audio_init);
+
+static void __exit smdk_audio_exit(void)
+{
+	platform_driver_unregister(&snd_smdk_driver);
+}
+
+module_exit(smdk_audio_exit);
+
+MODULE_AUTHOR("Sangbeom Kim, <sbkim73@samsung.com>");
+MODULE_DESCRIPTION("ALSA SoC SMDK WM8994 for PCM");
+MODULE_LICENSE("GPL");
-- 
1.7.1

  reply	other threads:[~2011-04-25  6:54 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-04-25  6:54 (unknown), Sangbeom Kim
2011-04-25  6:54 ` Sangbeom Kim [this message]
2011-04-25  6:54 ` [PATCH 1/2] ARM: EXYNOS4: Add PCM audio support for WM8994 Sangbeom Kim
2011-04-25 16:10   ` Jassi Brar
2011-04-26  2:06     ` [alsa-devel] " Sangbeom Kim
2011-04-26  5:07       ` Jassi Brar
2011-04-26  8:26 ` [alsa-devel] (no subject) Liam Girdwood

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1303714472-2391-2-git-send-email-sbkim73@samsung.com \
    --to=sbkim73@samsung.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@opensource.wolfsonmicro.com \
    --cc=jassisinghbrar@gmail.com \
    --cc=kgene.kim@samsung.com \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=lrg@slimlogic.co.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.