From: ryan@bluewatersys.com (Ryan Mallon)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V4 23/23] at91: Remove mAgic and ISI device code
Date: Tue, 3 May 2011 12:03:37 +1200 [thread overview]
Message-ID: <1304381017-17912-24-git-send-email-ryan@bluewatersys.com> (raw)
In-Reply-To: <1304381017-17912-1-git-send-email-ryan@bluewatersys.com>
The AT572D940HF mAgic device and the AT91SAM9263 ISI device do not
have drivers yet and therefore the platform code in arch/arm/mach-at91
is unused and can be removed.
Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
---
arch/arm/mach-at91/at572d940hf_devices.c | 73 -----------------------------
arch/arm/mach-at91/at91sam9263_devices.c | 50 --------------------
arch/arm/mach-at91/board-at572d940hf_ek.c | 2 -
arch/arm/mach-at91/include/mach/board.h | 6 --
4 files changed, 0 insertions(+), 131 deletions(-)
diff --git a/arch/arm/mach-at91/at572d940hf_devices.c b/arch/arm/mach-at91/at572d940hf_devices.c
index 9910fc8..26aa567 100644
--- a/arch/arm/mach-at91/at572d940hf_devices.c
+++ b/arch/arm/mach-at91/at572d940hf_devices.c
@@ -250,79 +250,6 @@ static struct at91_dev_table_uart device_uart2 __initdata = {
.cts_pin = {AT91_PIN_PA16, AT91_PIN_PERIPH_A, 0, 0, 0},
};
-/* --------------------------------------------------------------------
- * mAgic
- * -------------------------------------------------------------------- */
-
-#ifdef CONFIG_MAGICV
-static struct resource mAgic_resources[] = {
- {
- .start = AT91_MAGIC_PM_BASE,
- .end = AT91_MAGIC_PM_BASE + AT91_MAGIC_PM_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = AT91_MAGIC_DM_I_BASE,
- .end = AT91_MAGIC_DM_I_BASE + AT91_MAGIC_DM_I_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = AT91_MAGIC_DM_F_BASE,
- .end = AT91_MAGIC_DM_F_BASE + AT91_MAGIC_DM_F_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = AT91_MAGIC_DM_DB_BASE,
- .end = AT91_MAGIC_DM_DB_BASE + AT91_MAGIC_DM_DB_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = AT91_MAGIC_REGS_BASE,
- .end = AT91_MAGIC_REGS_BASE + AT91_MAGIC_REGS_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = AT91_MAGIC_EXTPAGE_BASE,
- .end = AT91_MAGIC_EXTPAGE_BASE + AT91_MAGIC_EXTPAGE_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = AT572D940HF_ID_MSIRQ0,
- .end = AT572D940HF_ID_MSIRQ0,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = AT572D940HF_ID_MHALT,
- .end = AT572D940HF_ID_MHALT,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = AT572D940HF_ID_MEXC,
- .end = AT572D940HF_ID_MEXC,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = AT572D940HF_ID_MEDMA,
- .end = AT572D940HF_ID_MEDMA,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device mAgic_device = {
- .name = "mAgic",
- .id = -1,
- .num_resources = ARRAY_SIZE(mAgic_resources),
- .resource = mAgic_resources,
-};
-
-void __init at91_add_device_mAgic(void)
-{
- platform_device_register(&mAgic_device);
-}
-#else
-void __init at91_add_device_mAgic(void) {}
-#endif
-
static struct at91_device_table at572d940hf_device_table __initdata = {
.ethernet = &device_eth,
.usbh_ohci = &device_usbh_ohci,
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index b06246c..4bb42ae 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -309,56 +309,6 @@ static struct at91_dev_table_lcdc device_lcdc __initdata = {
};
/* --------------------------------------------------------------------
- * Image Sensor Interface
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_VIDEO_AT91_ISI) || defined(CONFIG_VIDEO_AT91_ISI_MODULE)
-
-struct resource isi_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_ISI,
- .end = AT91SAM9263_BASE_ISI + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9263_ID_ISI,
- .end = AT91SAM9263_ID_ISI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9263_isi_device = {
- .name = "at91_isi",
- .id = -1,
- .resource = isi_resources,
- .num_resources = ARRAY_SIZE(isi_resources),
-};
-
-void __init at91_add_device_isi(void)
-{
- at91_set_A_periph(AT91_PIN_PE0, 0); /* ISI_D0 */
- at91_set_A_periph(AT91_PIN_PE1, 0); /* ISI_D1 */
- at91_set_A_periph(AT91_PIN_PE2, 0); /* ISI_D2 */
- at91_set_A_periph(AT91_PIN_PE3, 0); /* ISI_D3 */
- at91_set_A_periph(AT91_PIN_PE4, 0); /* ISI_D4 */
- at91_set_A_periph(AT91_PIN_PE5, 0); /* ISI_D5 */
- at91_set_A_periph(AT91_PIN_PE6, 0); /* ISI_D6 */
- at91_set_A_periph(AT91_PIN_PE7, 0); /* ISI_D7 */
- at91_set_A_periph(AT91_PIN_PE8, 0); /* ISI_PCK */
- at91_set_A_periph(AT91_PIN_PE9, 0); /* ISI_HSYNC */
- at91_set_A_periph(AT91_PIN_PE10, 0); /* ISI_VSYNC */
- at91_set_B_periph(AT91_PIN_PE11, 0); /* ISI_MCK (PCK3) */
- at91_set_B_periph(AT91_PIN_PE12, 0); /* ISI_PD8 */
- at91_set_B_periph(AT91_PIN_PE13, 0); /* ISI_PD9 */
- at91_set_B_periph(AT91_PIN_PE14, 0); /* ISI_PD10 */
- at91_set_B_periph(AT91_PIN_PE15, 0); /* ISI_PD11 */
-}
-#else
-void __init at91_add_device_isi(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
* Timer/Counter block
* -------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/board-at572d940hf_ek.c b/arch/arm/mach-at91/board-at572d940hf_ek.c
index 8955133..ff62346 100644
--- a/arch/arm/mach-at91/board-at572d940hf_ek.c
+++ b/arch/arm/mach-at91/board-at572d940hf_ek.c
@@ -312,8 +312,6 @@ static void __init eb_board_init(void)
at91_add_device_mmc(0, &eb_mmc_data);
/* Ethernet */
at91_add_device_eth(&eb_eth_data);
- /* mAgic */
- at91_add_device_mAgic();
}
MACHINE_START(AT572D940HFEB, "Atmel AT91D940HF-EB")
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index 25a6127..33ba440 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -186,9 +186,6 @@ extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data);
/* AC97 */
extern void __init at91_add_device_ac97(struct ac97c_platform_data *data);
- /* ISI */
-extern void __init at91_add_device_isi(void);
-
/* Touchscreen Controller */
struct at91_tsadcc_data {
unsigned int adc_clock;
@@ -208,9 +205,6 @@ extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
extern void __init at91_pwm_leds(struct gpio_led *leds, int nr);
- /* AT572D940HF DSP */
-extern void __init at91_add_device_mAgic(void);
-
/* FIXME: this needs a better location, but gets stuff building again */
extern int at91_suspend_entering_slow_clock(void);
--
1.7.0.4
next prev parent reply other threads:[~2011-05-03 0:03 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-03 0:03 [PATCH V4 00/23] Create common framework for AT91 device initialisation Ryan Mallon
2011-05-03 0:03 ` [PATCH V4 01/23] at91: Add common devices framework Ryan Mallon
2011-05-03 0:03 ` [PATCH V4 02/23] at91: Make Ethernet device common Ryan Mallon
2011-05-03 0:03 ` [PATCH V4 03/23] at91: Make USB OHCI/EHCI devices common Ryan Mallon
2011-05-03 0:03 ` [PATCH V4 04/23] at91: Make UDC device common Ryan Mallon
2011-05-03 0:03 ` [PATCH V4 05/23] at91: Make MMC " Ryan Mallon
2011-05-03 0:03 ` [PATCH V4 06/23] at91: Make NAND " Ryan Mallon
2011-05-03 0:03 ` [PATCH V4 07/23] at91: Make TWI " Ryan Mallon
2011-05-03 0:03 ` [PATCH V4 08/23] at91: Make SPI " Ryan Mallon
2011-05-03 0:03 ` [PATCH V4 09/23] at91: Make TCB " Ryan Mallon
2011-05-03 0:03 ` [PATCH V4 10/23] at91: Make RTT " Ryan Mallon
2011-05-03 0:03 ` [PATCH V4 11/23] at91: Make watchdog " Ryan Mallon
2011-05-03 0:03 ` [PATCH V4 12/23] at91: Make UART devices common Ryan Mallon
2011-05-03 0:03 ` [PATCH V4 13/23] at91: Make PWM device common Ryan Mallon
2011-05-03 0:03 ` [PATCH V4 14/23] at91: Make SSC " Ryan Mallon
2011-05-03 0:03 ` [PATCH V4 15/23] at91: Make AC97 " Ryan Mallon
2011-05-03 0:03 ` [PATCH V4 16/23] at91: Make LCD controller " Ryan Mallon
2011-05-03 0:03 ` [PATCH V4 17/23] at91: Make touchscreen " Ryan Mallon
2011-05-03 0:03 ` [PATCH V4 18/23] at91: Make HDMAC " Ryan Mallon
2011-05-03 0:03 ` [PATCH V4 19/23] at91: Make RTC " Ryan Mallon
2011-05-03 0:03 ` [PATCH V4 20/23] at91: Make high speed USB gadget " Ryan Mallon
2011-05-03 0:03 ` [PATCH V4 21/23] at91: Make compact flash " Ryan Mallon
2011-05-03 0:03 ` [PATCH V4 22/23] at91: Move at91sam9263 CAN device to common devices Ryan Mallon
2011-05-03 0:03 ` Ryan Mallon [this message]
2011-05-03 0:08 ` [PATCH V4 00/23] Create common framework for AT91 device initialisation Jean-Christophe PLAGNIOL-VILLARD
2011-05-03 0:20 ` Ryan Mallon
2011-05-03 0:19 ` Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1304381017-17912-24-git-send-email-ryan@bluewatersys.com \
--to=ryan@bluewatersys.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.