All of lore.kernel.org
 help / color / mirror / Atom feed
From: Steve Kerrison <steve@stevekerrison.com>
To: Andreas Oberritter <obi@linuxtv.org>
Cc: linux-media@vger.kernel.org, Antti Palosaari <crope@iki.fi>,
	Mauro Carvalho Chehab <mchehab@redhat.com>
Subject: Re: [git:v4l-dvb/for_v2.6.40] [media] Sony CXD2820R DVB-T/T2/C demodulator driver
Date: Fri, 06 May 2011 11:42:19 +0100	[thread overview]
Message-ID: <1304678539.8670.29.camel@ares> (raw)
In-Reply-To: <4DC3C6FA.8070505@linuxtv.org>

Hi Andreas,

>From cxd2820r_priv.h:

> +/*
> + * FIXME: These are totally wrong and must be added properly to the API.
> + * Only temporary solution in order to get driver compile.
> + */
> +#define SYS_DVBT2             SYS_DAB
> +#define TRANSMISSION_MODE_1K  0
> +#define TRANSMISSION_MODE_16K 0
> +#define TRANSMISSION_MODE_32K 0
> +#define GUARD_INTERVAL_1_128  0
> +#define GUARD_INTERVAL_19_128 0
> +#define GUARD_INTERVAL_19_256 0


I believe Antti didn't want to make frontent.h changes until a consensus
was reached on how to develop the API for T2 support.

Regards,
-- 
Steve Kerrison MEng Hons.
http://www.stevekerrison.com/ 

On Fri, 2011-05-06 at 12:01 +0200, Andreas Oberritter wrote:
> On 05/05/2011 12:53 PM, Mauro Carvalho Chehab wrote:
> > +		switch (priv->delivery_system) {
> > +		case SYS_UNDEFINED:
> > +			if (c->delivery_system == SYS_DVBT) {
> > +				/* SLEEP => DVB-T */
> > +				ret = cxd2820r_set_frontend_t(fe, p);
> > +			} else {
> > +				/* SLEEP => DVB-T2 */
> > +				ret = cxd2820r_set_frontend_t2(fe, p);
> > +			}
> > +			break;
> > +		case SYS_DVBT:
> > +			if (c->delivery_system == SYS_DVBT) {
> > +				/* DVB-T => DVB-T */
> > +				ret = cxd2820r_set_frontend_t(fe, p);
> > +			} else if (c->delivery_system == SYS_DVBT2) {
> > +				/* DVB-T => DVB-T2 */
> > +				ret = cxd2820r_sleep_t(fe);
> > +				ret = cxd2820r_set_frontend_t2(fe, p);
> > +			}
> > +			break;
> > +		case SYS_DVBT2:
> > +			if (c->delivery_system == SYS_DVBT2) {
> 
> Is this driver compilable? I don't see the necessary changes to
> linux/dvb/frontend.h to add SYS_DVBT2 in your tree.
> 
> See below for a patch that I used for testing DVB-T2 internally.
> 
> Regards,
> Andreas
> 
> --
> commit e89f95641f29b7a4457e7a68649f4374933e36a2
> Author: Andreas Oberritter <obi@linuxtv.org>
> Date:   Mon Mar 15 14:43:52 2010 +0100
> 
>     DVB: Add basic API support for DVB-T2 and bump minor version
>     
>     Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
> 
> diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c
> index f5016ae..6f06efe 100644
> --- a/drivers/media/dvb/dvb-core/dvb_frontend.c
> +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c
> @@ -1141,10 +1141,9 @@ static void dtv_property_adv_params_sync(struct dvb_frontend *fe)
>  		break;
>  	}
>  
> -	if(c->delivery_system == SYS_ISDBT) {
> -		/* Fake out a generic DVB-T request so we pass validation in the ioctl */
> -		p->frequency = c->frequency;
> -		p->inversion = c->inversion;
> +	/* Fake out a generic DVB-T request so we pass validation in the ioctl */
> +	if ((c->delivery_system == SYS_ISDBT) ||
> +	    (c->delivery_system == SYS_DVBT2)) {
>  		p->u.ofdm.constellation = QAM_AUTO;
>  		p->u.ofdm.code_rate_HP = FEC_AUTO;
>  		p->u.ofdm.code_rate_LP = FEC_AUTO;
> diff --git a/include/linux/dvb/frontend.h b/include/linux/dvb/frontend.h
> index 493a2bf..36a3ed6 100644
> --- a/include/linux/dvb/frontend.h
> +++ b/include/linux/dvb/frontend.h
> @@ -175,14 +175,20 @@ typedef enum fe_transmit_mode {
>  	TRANSMISSION_MODE_2K,
>  	TRANSMISSION_MODE_8K,
>  	TRANSMISSION_MODE_AUTO,
> -	TRANSMISSION_MODE_4K
> +	TRANSMISSION_MODE_4K,
> +	TRANSMISSION_MODE_1K,
> +	TRANSMISSION_MODE_16K,
> +	TRANSMISSION_MODE_32K,
>  } fe_transmit_mode_t;
>  
>  typedef enum fe_bandwidth {
>  	BANDWIDTH_8_MHZ,
>  	BANDWIDTH_7_MHZ,
>  	BANDWIDTH_6_MHZ,
> -	BANDWIDTH_AUTO
> +	BANDWIDTH_AUTO,
> +	BANDWIDTH_5_MHZ,
> +	BANDWIDTH_10_MHZ,
> +	BANDWIDTH_1_712_MHZ,
>  } fe_bandwidth_t;
>  
> 
> @@ -191,7 +197,10 @@ typedef enum fe_guard_interval {
>  	GUARD_INTERVAL_1_16,
>  	GUARD_INTERVAL_1_8,
>  	GUARD_INTERVAL_1_4,
> -	GUARD_INTERVAL_AUTO
> +	GUARD_INTERVAL_AUTO,
> +	GUARD_INTERVAL_1_128,
> +	GUARD_INTERVAL_19_128,
> +	GUARD_INTERVAL_19_256,
>  } fe_guard_interval_t;
>  
> 
> @@ -305,7 +314,9 @@ struct dvb_frontend_event {
>  
>  #define DTV_ISDBS_TS_ID		42
>  
> -#define DTV_MAX_COMMAND				DTV_ISDBS_TS_ID
> +#define DTV_DVBT2_PLP_ID	43
> +
> +#define DTV_MAX_COMMAND				DTV_DVBT2_PLP_ID
>  
>  typedef enum fe_pilot {
>  	PILOT_ON,
> @@ -337,6 +348,7 @@ typedef enum fe_delivery_system {
>  	SYS_DMBTH,
>  	SYS_CMMB,
>  	SYS_DAB,
> +	SYS_DVBT2,
>  } fe_delivery_system_t;
>  
>  struct dtv_cmds_h {
> diff --git a/include/linux/dvb/version.h b/include/linux/dvb/version.h
> index 5a7546c..1421cc8 100644
> --- a/include/linux/dvb/version.h
> +++ b/include/linux/dvb/version.h
> @@ -24,6 +24,6 @@
>  #define _DVBVERSION_H_
>  
>  #define DVB_API_VERSION 5
> -#define DVB_API_VERSION_MINOR 2
> +#define DVB_API_VERSION_MINOR 3
>  
>  #endif /*_DVBVERSION_H_*/
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html


  reply	other threads:[~2011-05-06 10:48 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <E1QHwSm-0006hA-A9@www.linuxtv.org>
2011-05-06 10:01 ` [git:v4l-dvb/for_v2.6.40] [media] Sony CXD2820R DVB-T/T2/C demodulator driver Andreas Oberritter
2011-05-06 10:42   ` Steve Kerrison [this message]
2011-05-06 12:23     ` Mauro Carvalho Chehab
2011-05-06 12:36       ` Andreas Oberritter
2011-05-06 14:35         ` Antti Palosaari
     [not found] <20110506125542.ADA1D162E7@stevekerrison.com>
2011-05-06 13:46 ` Antti Palosaari
2011-05-06 15:30 ` Mauro Carvalho Chehab
2011-05-06 15:46   ` Mauro Carvalho Chehab

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1304678539.8670.29.camel@ares \
    --to=steve@stevekerrison.com \
    --cc=crope@iki.fi \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@redhat.com \
    --cc=obi@linuxtv.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.