From: "Michel Dänzer" <michel@daenzer.net>
To: Alex Deucher <alexdeucher@gmail.com>
Cc: Dave Airlie <airlied@redhat.com>,
dri-devel@lists.freedesktop.org,
Joachim Henke <j-o@users.sourceforge.net>
Subject: Re: [regression] blank screen with radeondrmfb on iMac G5 (ALS)
Date: Sat, 21 May 2011 18:02:33 +0200 [thread overview]
Message-ID: <1305993753.8515.24.camel@thor.local> (raw)
In-Reply-To: <BANLkTimvSf_yrZ4-b6QGOt=1KZWxQu1FSg@mail.gmail.com>
On Sam, 2011-05-21 at 11:14 -0400, Alex Deucher wrote:
> On Sat, May 21, 2011 at 8:21 AM, Joachim Henke
> <j-o@users.sourceforge.net> wrote:
> > Hello,
> >
> > I found a regression in Linux 2.6.37.2 - I know this report comes quite
> > late, but I had no time to investigate until now. And I found that this
> > still persists up to 2.6.39 :(
> >
> > When I upgraded from 2.6.37 to 2.6.37.3, after reboot my machine came up
> > with a blank/black screen (backlight on). It's an iMac G5 (Ambient Light
> > Sensor) with a Radeon 9600 (RV350). After Xorg had started, the screen
> > remained blank.
> >
> > There were only a few Radeon specific changes between these two versions, so
> > that I could quickly identify the cause. It's commit
> > ce9eb2c297f918be46e36dd86b7e88cabdc3e22df
> > (9fad321ac6bedd96f449754a1a25289ea1789a49 upstream). After reverting this
> > with a simple patch, it works properly again:
> >
> > --- linux-2.6.39/drivers/gpu/drm/radeon/radeon_combios.c.orig
> > +++ linux-2.6.39/drivers/gpu/drm/radeon/radeon_combios.c
> > @@ -1515,11 +1515,6 @@
> > (rdev->pdev->subsystem_device == 0x4a48)) {
> > /* Mac X800 */
> > rdev->mode_info.connector_table = CT_MAC_X800;
> > - } else if ((rdev->pdev->device == 0x4150) &&
> > - (rdev->pdev->subsystem_vendor == 0x1002) &&
> > - (rdev->pdev->subsystem_device == 0x4150)) {
> > - /* Mac G5 9600 */
> > - rdev->mode_info.connector_table = CT_MAC_G5_9600;
> > } else
> > #endif /* CONFIG_PPC_PMAC */
> > #ifdef CONFIG_PPC64
> >
> >
> > This is a diff from the dmesg [without my patch] -> [with my patch]:
> >
> > [drm] ring test succeeded in 0 usecs
> > [drm] radeon: ib pool ready.
> > [drm] ib test succeeded in 0 usecs
> > -[drm] Connector Table: 12 (mac g5 9600)
> > -[drm] No valid Ext TMDS info found in BIOS
> > -[drm] No TV DAC info found in BIOS
> > +[drm] Connector Table: 1 (generic)
> > [drm] No TMDS info found in BIOS
> > +[drm] No TV DAC info found in BIOS
> > [drm] Radeon Display Connectors
> > [drm] Connector 0:
> > [drm] DVI-I
> > [drm] HPD1
> > [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
> > [drm] Encoders:
> > -[drm] DFP2: INTERNAL_DVO1
> > +[drm] DFP1: INTERNAL_TMDS1
> > [drm] CRT2: INTERNAL_DAC2
> > [drm] Connector 1:
> > -[drm] DVI-I
> > -[drm] HPD2
> > +[drm] VGA
> > [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
> > [drm] Encoders:
> > -[drm] DFP1: INTERNAL_TMDS1
> > [drm] CRT1: INTERNAL_DAC1
> > [drm] Connector 2:
> > [drm] S-video
> >
> >
> > On which kind of machines was the original commit tested/supposed to work?
> > Do you see a possibility to fix this in a proper way upstream?
>
> It was a 9600 from a G5, I don't recall which one.
Probably a tower.
> Thank apple for making multiple systems all wired up differently with the same pci
> ids. I suppose to fix it properly we'll need some way of identifying
> the specific machine. Are there specific ids for each g5 for
> of_machine_is_compatible()?
Yeah, they should have distinct identifiers, visible on
the /proc/cpuinfo model/machine/motherboard lines.
--
Earthling Michel Dänzer | http://www.vmware.com
Libre software enthusiast | Debian, X and DRI developer
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2011-05-21 16:02 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-21 12:21 [regression] blank screen with radeondrmfb on iMac G5 (ALS) Joachim Henke
2011-05-21 15:14 ` Alex Deucher
2011-05-21 16:02 ` Michel Dänzer [this message]
2011-05-21 17:05 ` Joachim Henke
2011-06-06 16:53 ` [PATCH] drm/radeon/kms: fix mac g5 quirk Alex Deucher
2011-06-14 6:39 ` Michel Dänzer
2011-06-14 6:48 ` Alex Deucher
2011-06-14 6:57 ` Michel Dänzer
2011-06-14 15:22 ` [PATCH] drm/radeon/kms: be more pendatic about the " Alex Deucher
2011-06-14 15:25 ` Michel Dänzer
2011-06-14 15:27 ` [PATCH] drm/radeon/kms: be more pedantic about the g5 quirk (v2) Alex Deucher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1305993753.8515.24.camel@thor.local \
--to=michel@daenzer.net \
--cc=airlied@redhat.com \
--cc=alexdeucher@gmail.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=j-o@users.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.