From: Mike Frysinger <vapier@gentoo.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 6/7] Blackfin: cm-bf537e/cm-bf537u/tcm-bf537: enable mmc_spi support
Date: Mon, 23 May 2011 23:30:59 -0400 [thread overview]
Message-ID: <1306207860-5124-7-git-send-email-vapier@gentoo.org> (raw)
In-Reply-To: <1306207860-5124-1-git-send-email-vapier@gentoo.org>
From: Harald Krapfenbauer <harald.krapfenbauer@bluetechnix.com>
These boards have an mmc/sd slot on them connected over SPI, so
enable the driver.
Signed-off-by: Harald Krapfenbauer <harald.krapfenbauer@bluetechnix.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
include/configs/cm-bf537e.h | 17 ++++++++++++++++-
include/configs/cm-bf537u.h | 16 +++++++++++++++-
include/configs/tcm-bf537.h | 16 +++++++++++++++-
3 files changed, 46 insertions(+), 3 deletions(-)
diff --git a/include/configs/cm-bf537e.h b/include/configs/cm-bf537e.h
index 4eff9c9..7040567 100644
--- a/include/configs/cm-bf537e.h
+++ b/include/configs/cm-bf537e.h
@@ -55,7 +55,7 @@
#define CONFIG_EBIU_AMBCTL0_VAL (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3)
#define CONFIG_EBIU_AMBCTL1_VAL (B3WAT_7 | B3RAT_11 | B3HT_2 | B3ST_3 | B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3)
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
+#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
#define CONFIG_SYS_MALLOC_LEN (128 * 1024)
@@ -89,6 +89,13 @@
/*
+ * SPI Settings
+ */
+#define CONFIG_BFIN_SPI
+#define CONFIG_ENV_SPI_MAX_HZ 30000000
+
+
+/*
* Env Storage Settings
*/
#define CONFIG_ENV_IS_IN_FLASH 1
@@ -122,6 +129,14 @@
/*
+ * SPI_MMC Settings
+ */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MMC_SPI
+
+
+/*
* Misc Settings
*/
#define CONFIG_BAUDRATE 115200
diff --git a/include/configs/cm-bf537u.h b/include/configs/cm-bf537u.h
index ccb3b47..5dca810 100644
--- a/include/configs/cm-bf537u.h
+++ b/include/configs/cm-bf537u.h
@@ -54,7 +54,7 @@
#define CONFIG_EBIU_AMBCTL0_VAL (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3)
#define CONFIG_EBIU_AMBCTL1_VAL (B3WAT_7 | B3RAT_11 | B3HT_2 | B3ST_3 | B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3)
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
+#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
#define CONFIG_SYS_MALLOC_LEN (128 * 1024)
@@ -87,6 +87,13 @@
/*
+ * SPI Settings
+ */
+#define CONFIG_BFIN_SPI
+#define CONFIG_ENV_SPI_MAX_HZ 30000000
+
+
+/*
* Env Storage Settings
*/
#define CONFIG_ENV_IS_IN_FLASH 1
@@ -120,6 +127,13 @@
/*
+ * SPI_MMC Settings
+ */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MMC_SPI
+
+/*
* Misc Settings
*/
#define CONFIG_BAUDRATE 115200
diff --git a/include/configs/tcm-bf537.h b/include/configs/tcm-bf537.h
index 0807589..dc16f2e 100644
--- a/include/configs/tcm-bf537.h
+++ b/include/configs/tcm-bf537.h
@@ -55,7 +55,7 @@
#define CONFIG_EBIU_AMBCTL0_VAL (B1WAT_7 | B1RAT_11 | B1HT_2 | B1ST_3 | B0WAT_7 | B0RAT_11 | B0HT_2 | B0ST_3)
#define CONFIG_EBIU_AMBCTL1_VAL (B3WAT_7 | B3RAT_11 | B3HT_2 | B3ST_3 | B2WAT_7 | B2RAT_11 | B2HT_2 | B2ST_3)
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
+#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
#define CONFIG_SYS_MALLOC_LEN (128 * 1024)
@@ -89,6 +89,13 @@
/*
+ * SPI Settings
+ */
+#define CONFIG_BFIN_SPI
+#define CONFIG_ENV_SPI_MAX_HZ 30000000
+
+
+/*
* Env Storage Settings
*/
#define CONFIG_ENV_IS_IN_FLASH 1
@@ -122,6 +129,13 @@
/*
+ * SPI_MMC Settings
+ */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MMC_SPI
+
+/*
* Misc Settings
*/
#define CONFIG_BAUDRATE 115200
--
1.7.5.rc3
next prev parent reply other threads:[~2011-05-24 3:30 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-24 3:30 [U-Boot] [PATCH 0/7] Blackfin fixes for 2011.06 Mike Frysinger
2011-05-24 3:30 ` [U-Boot] [PATCH 1/7] Blackfin: use common LDSCRIPT logic Mike Frysinger
2011-05-24 3:30 ` [U-Boot] [PATCH 2/7] Blackfin: use on-chip reset func with newer parts Mike Frysinger
2011-05-24 3:30 ` [U-Boot] [PATCH 3/7] Blackfin: bf548-ezkit/bf561-ezkit: update env location Mike Frysinger
2011-05-24 3:30 ` [U-Boot] [PATCH 4/7] Blackfin: boards: build zlib dir with -O2 Mike Frysinger
2011-05-24 3:30 ` [U-Boot] [PATCH 5/7] Blackfin: cm-bf537e/cm-bf537u/tcm-bf537: update network settings Mike Frysinger
2011-05-24 3:30 ` Mike Frysinger [this message]
2011-05-24 3:31 ` [U-Boot] [PATCH 7/7] Blackfin: cm-bf537e/cm-bf537u/tcm-bf537: update embedded env settings Mike Frysinger
2011-05-24 3:32 ` [U-Boot] Pull request u-boot-blackfin.git Mike Frysinger
2011-06-01 19:58 ` Wolfgang Denk
2011-06-02 15:02 ` Mike Frysinger
2011-06-02 20:46 ` Wolfgang Denk
2011-06-03 17:28 ` [U-Boot] Pull request u-boot-blackfin.git (v2) Mike Frysinger
2011-06-08 21:28 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1306207860-5124-7-git-send-email-vapier@gentoo.org \
--to=vapier@gentoo.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.