From: Alex Williamson <alex.williamson@redhat.com>
To: Yinghai Lu <yinghai@kernel.org>
Cc: David Woodhouse <dwmw2@infradead.org>,
Vinod Koul <vinod.koul@intel.com>,
linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
Jesse Barnes <jbarnes@virtuousgeek.org>,
iommu@lists.linux-foundation.org,
Dan Williams <dan.j.williams@intel.com>,
Andrew Morton <akpm@linux-foundation.org>
Subject: Re: [PATCH] pci, dmar: Update dmar units devices list during hotplug
Date: Tue, 24 May 2011 16:38:56 -0600 [thread overview]
Message-ID: <1306276736.3100.107.camel@x201> (raw)
In-Reply-To: <4DDC26FE.6070207@kernel.org>
On Tue, 2011-05-24 at 14:45 -0700, Yinghai Lu wrote:
> No, it does not work.
I didn't say this wasn't without some effort, just thought it might give
you a jump start.
Alex
> [ 592.792864] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
> [ 592.793279] IP: [<ffffffff8136271a>] dmar_match_scope+0x27/0xb6
> [ 592.804488] PGD 0
> [ 592.804629] Oops: 0000 [#1] SMP
> [ 592.804849] CPU 1
> [ 592.804947] Modules linked in:
> [ 592.824426]
> [ 592.824521] Pid: 14498, comm: kworker/u:7 Tainted: G W 2.6.39-tip-yh-06738-g5d55a15-dirty #1043 Oracle Corporation Sun Fire X4800 M2 /
> [ 592.844637] RIP: 0010:[<ffffffff8136271a>] [<ffffffff8136271a>] dmar_match_scope+0x27/0xb6
> [ 592.864410] RSP: 0018:ffff881ffce45a70 EFLAGS: 00010293
> [ 592.864673] RAX: 0000000000000000 RBX: 0000000000000008 RCX: 0000000000000000
> [ 592.884403] RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff88fffeef6000
> [ 592.904205] RBP: ffff881ffce45ab0 R08: 0000000000000000 R09: 0000000000000000
> [ 592.904535] R10: 0000000000000000 R11: ffff88dffedda320 R12: 0000000000000000
> [ 592.924419] R13: 0000000000000000 R14: ffff88fffeef6000 R15: 0000000000000000
> [ 592.924748] FS: 0000000000000000(0000) GS:ffff88207d800000(0000) knlGS:0000000000000000
> [ 592.944447] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
> [ 592.964196] CR2: 0000000000000010 CR3: 00000000023cb000 CR4: 00000000000006e0
> [ 592.964541] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [ 592.984308] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> [ 593.004091] Process kworker/u:7 (pid: 14498, threadinfo ffff881ffce44000, task ffff881ffce3c560)
> [ 593.004492] Stack:
> [ 593.024051] ffff881ffce45a80 ffffffff8134bf6a ffff881ffce45ab0 ffff88407d002640
> [ 593.024479] 0000000000000000 0000000000000000 0000000000000000 0000000000000000
> [ 593.044272] ffff881ffce45ae0 ffffffff81363e4a ffff881ffce45b00 ffff88dffe1c1d00
> [ 593.064027] Call Trace:
> [ 593.064156] [<ffffffff8134bf6a>] ? pci_get_device+0x16/0x18
> [ 593.064441] [<ffffffff81363e4a>] device_to_iommu+0x4c/0x77
> [ 593.084054] [<ffffffff81364163>] domain_remove_one_dev_info+0x39/0x1fc
> [ 593.084361] [<ffffffff8136637f>] device_notifier+0x52/0x78
> [ 593.104093] [<ffffffff81c24cc3>] notifier_call_chain+0x68/0x9f
> [ 593.123814] [<ffffffff81193710>] ? sysfs_schedule_callback+0x1df/0x1df
> [ 593.124125] [<ffffffff8109f209>] __blocking_notifier_call_chain+0x4c/0x61
> [ 593.143899] [<ffffffff8109f232>] blocking_notifier_call_chain+0x14/0x16
> [ 593.144207] [<ffffffff81414909>] __device_release_driver+0xcd/0xd2
> [ 593.163934] [<ffffffff81414933>] device_release_driver+0x25/0x32
> [ 593.164222] [<ffffffff814144bd>] bus_remove_device+0x8e/0x9f
> [ 593.183934] [<ffffffff8141255e>] device_del+0x130/0x17f
> [ 593.184186] [<ffffffff814125c3>] device_unregister+0x16/0x23
> [ 593.203888] [<ffffffff813473e5>] pci_stop_bus_device+0x61/0x83
> [ 593.223661] [<ffffffff8134c88a>] ? remove_callback+0x1f/0x3c
> [ 593.223932] [<ffffffff813473b4>] pci_stop_bus_device+0x30/0x83
> [ 593.243652] [<ffffffff81347470>] pci_remove_bus_device+0x1a/0xba
> [ 593.243955] [<ffffffff8134c896>] remove_callback+0x2b/0x3c
> [ 593.263631] [<ffffffff8119372c>] sysfs_schedule_callback_work+0x1c/0x5f
> [ 593.263962] [<ffffffff8109433b>] process_one_work+0x231/0x3e6
> [ 593.283667] [<ffffffff810942ac>] ? process_one_work+0x1a2/0x3e6
> [ 593.283958] [<ffffffff81094829>] worker_thread+0x17c/0x240
> [ 593.303651] [<ffffffff810add32>] ? trace_hardirqs_on+0xd/0xf
> [ 593.303927] [<ffffffff810946ad>] ? manage_workers+0xab/0xab
> [ 593.323617] [<ffffffff81099ea5>] kthread+0xa0/0xa8
> [ 593.323845] [<ffffffff810adbcc>] ? trace_hardirqs_on_caller+0x1f/0x178
> [ 593.343620] [<ffffffff81c29614>] kernel_thread_helper+0x4/0x10
> [ 593.343888] [<ffffffff81c218c4>] ? _raw_spin_unlock_irq+0x30/0x36
> [ 593.363642] [<ffffffff810add32>] ? trace_hardirqs_on+0xd/0xf
> [ 593.383357] [<ffffffff81c21bc0>] ? retint_restore_args+0xe/0xe
> [ 593.383624] [<ffffffff81099e05>] ? __init_kthread_worker+0x5b/0x5b
> [ 593.403441] [<ffffffff81c29610>] ? gs_change+0xb/0xb
> [ 593.403667] Code: 41 5f c9 c3 55 48 89 e5 41 57 41 56 41 55 41 54 53 48 83 ec 18 66 66 66 66 90 45 31 ed 89 f3 49 89 d4 49 89 fe 44 0f b7 f9 eb 72
> [ 593.424146] 8b 44 24 10 49 8b 16 48 8b 80 88 00 00 00 44 3b 38 75 57 48
> [ 593.443684] RIP [<ffffffff8136271a>] dmar_match_scope+0x27/0xb6
> [ 593.443968] RSP <ffff881ffce45a70>
> [ 593.463319] CR2: 0000000000000010
> [ 593.463510] ---[ end trace 75ddbb3d94414ea9 ]---
> [ 593.465841] BUG: unable to handle kernel
>
next prev parent reply other threads:[~2011-05-24 22:39 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-08 18:48 [PATCH] pci, dmar: Update dmar units devices list during hotplug Yinghai Lu
2011-05-19 22:15 ` Alex Williamson
2011-05-24 10:58 ` David Woodhouse
2011-05-24 17:42 ` Alex Williamson
2011-05-24 18:11 ` Yinghai Lu
2011-05-24 19:34 ` Yinghai Lu
2011-05-24 20:07 ` Alex Williamson
2011-05-24 20:24 ` Yinghai Lu
2011-05-24 20:34 ` Alex Williamson
2011-05-24 21:45 ` Yinghai Lu
2011-05-24 22:38 ` Alex Williamson [this message]
2011-05-24 23:02 ` Yinghai Lu
2011-05-25 5:42 ` Yinghai Lu
2011-05-25 5:45 ` Yinghai Lu
2011-05-25 12:43 ` Alex Williamson
2011-05-28 22:11 ` David Woodhouse
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1306276736.3100.107.camel@x201 \
--to=alex.williamson@redhat.com \
--cc=akpm@linux-foundation.org \
--cc=dan.j.williams@intel.com \
--cc=dwmw2@infradead.org \
--cc=iommu@lists.linux-foundation.org \
--cc=jbarnes@virtuousgeek.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=vinod.koul@intel.com \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.