From: Phil Blundell <pb@pbcl.net>
To: Patches and discussions about the oe-core layer
<openembedded-core@lists.openembedded.org>
Subject: Re: [PATCH v2] busybox: sync do_install() with oe master (mostly)
Date: Tue, 31 May 2011 14:31:13 +0100 [thread overview]
Message-ID: <1306848673.2525.493.camel@phil-desktop> (raw)
In-Reply-To: <1306404481.2525.296.camel@phil-desktop>
Ping?
p.
On Thu, 2011-05-26 at 11:08 +0100, Phil Blundell wrote:
> This is basically a backport of the current state of the art from the
> openembedded master repo. In particular this fixes an installation
> error on micro:
>
> | + cp -dPr /home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/image/bin /home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/image/sbin /home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/image /home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/image/busybox/
> | cp: will not create hard link `/home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/image/busybox/image/bin' to directory `/home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/image/busybox/bin'
> | cp: cannot copy a directory, `/home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/image', into itself, `/home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/image/busybox/image'
> | ERROR: Function 'do_install' failed (see /home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/temp/log.do_install.3808 for further information)
>
> Signed-off-by: Phil Blundell <philb@gnu.org>
> ---
>
> This version reinstates the busybox-udhcpc initscript which had gotten dropped by mistake in the last one.
>
> meta/recipes-core/busybox/busybox.inc | 99 +++++++++++++++------------
> meta/recipes-core/busybox/busybox_1.18.4.bb | 2 +-
> 2 files changed, 55 insertions(+), 46 deletions(-)
>
> diff --git a/meta/recipes-core/busybox/busybox.inc b/meta/recipes-core/busybox/busybox.inc
> index 341c5c4..86fbdae 100644
> --- a/meta/recipes-core/busybox/busybox.inc
> +++ b/meta/recipes-core/busybox/busybox.inc
> @@ -46,75 +46,84 @@ do_compile() {
> }
>
> do_install () {
> - unset CFLAGS CPPFLAGS CXXFLAGS LDFLAGS
> + oe_runmake busybox.links
> + if [ "${prefix}" != "/usr" ]; then
> + sed "s:^/usr/:${prefix}/:" busybox.links > busybox.links.new
> + mv busybox.links.new busybox.links
> + fi
> + if [ "${base_sbindir}" != "/sbin" ]; then
> + sed "s:^/sbin/:${base_sbindir}/:" busybox.links > busybox.links.new
> + mv busybox.links.new busybox.links
> + fi
> +
> install -d ${D}${sysconfdir}/init.d
> - oe_runmake "PREFIX=${D}" install
> - cp -pPR ${S}/_install/* ${D}/
> -
> - # Move everything to /busybox (not supposed to end up in any package)
> - install -d ${D}/busybox
> - ls ${D} -R
> -
> - cp -dPr ${D}${base_bindir} ${D}${base_sbindir} ${D}${prefix} ${D}/busybox/
> - # Move the busybox binary back to /bin
> - install -d ${D}${base_bindir}
> - mv ${D}/busybox${base_bindir}/busybox ${D}${base_bindir}/
> - # Move back the sh symlink
> - test -h ${D}/busybox${base_bindir}/sh && mv ${D}/busybox${base_bindir}/sh ${D}${base_bindir}/
> -
> - install -m 0755 ${WORKDIR}/syslog ${D}${sysconfdir}/init.d/syslog.${PN}
> - install -m 644 ${WORKDIR}/syslog.conf ${D}${sysconfdir}/syslog.conf.${PN}
> - if grep "CONFIG_CROND=y" ${WORKDIR}/defconfig; then
> - # Move crond back to /usr/sbin/crond
> - install -d ${D}${sbindir}
> - mv ${D}/busybox${sbindir}/crond ${D}${sbindir}/
>
> + if ! grep -q "CONFIG_FEATURE_INDIVIDUAL=y" ${WORKDIR}/defconfig; then
> + # Install /bin/busybox, and the /bin/sh link so the postinst script
> + # can run. Let update-alternatives handle the rest.
> + install -d ${D}${base_bindir}
> + if grep -q "CONFIG_FEATURE_SUID=y" ${WORKDIR}/defconfig; then
> + install -m 4755 ${S}/busybox ${D}${base_bindir}
> + else
> + install -m 0755 ${S}/busybox ${D}${base_bindir}
> + fi
> + ln -sf busybox ${D}${base_bindir}/sh
> + else
> + install -d ${D}${base_bindir} ${D}${base_sbindir}
> + install -d ${D}${libdir} ${D}${bindir} ${D}${sbindir}
> + cat busybox.links | while read FILE; do
> + NAME=`basename "$FILE"`
> + install -m 0755 "0_lib/$NAME" "${D}$FILE.${PN}"
> + done
> + # add suid bit where needed
> + for i in `grep -E "APPLET.*_BB_SUID_((MAYBE|REQUIRE))" include/applets.h | grep -v _BB_SUID_DROP | cut -f 3 -d '(' | cut -f 1 -d ','`; do
> + find ${D} -name $i.${PN} -exec chmod a+s {} \;
> + done
> + install -m 0755 0_lib/libbusybox.so.${PV} ${D}${libdir}/libbusybox.so.${PV}
> + ln -sf sh.${PN} ${D}${base_bindir}/sh
> + ln -sf ln.${PN} ${D}${base_bindir}/ln
> + ln -sf test.${PN} ${D}${bindir}/test
> + if [ -f ${D}/linuxrc.${PN} ]; then
> + mv ${D}/linuxrc.${PN} ${D}/linuxrc
> + fi
> + fi
> +
> + if grep -q "CONFIG_SYSLOGD=y" ${WORKDIR}/defconfig; then
> + install -m 0755 ${WORKDIR}/syslog ${D}${sysconfdir}/init.d/syslog.${PN}
> + install -m 644 ${WORKDIR}/syslog.conf ${D}${sysconfdir}/syslog.conf.${PN}
> + fi
> + if grep "CONFIG_CROND=y" ${WORKDIR}/defconfig; then
> install -m 0755 ${WORKDIR}/busybox-cron ${D}${sysconfdir}/init.d/
> fi
> if grep "CONFIG_HTTPD=y" ${WORKDIR}/defconfig; then
> - # Move httpd back to /usr/sbin/httpd
> - install -d ${D}${sbindir}
> - mv ${D}/busybox${sbindir}/httpd ${D}${sbindir}/
> -
> install -m 0755 ${WORKDIR}/busybox-httpd ${D}${sysconfdir}/init.d/
> install -d ${D}/srv/www
> fi
> if grep "CONFIG_UDHCPD=y" ${WORKDIR}/defconfig; then
> - # Move udhcpd back to /usr/sbin/udhcpd
> - install -d ${D}${sbindir}
> - mv ${D}/busybox${sbindir}/udhcpd ${D}${sbindir}/
> -
> install -m 0755 ${WORKDIR}/busybox-udhcpd ${D}${sysconfdir}/init.d/
> fi
> if grep "CONFIG_HWCLOCK=y" ${WORKDIR}/defconfig; then
> - # Move hwclock back to /sbin/hwclock
> - install -d ${D}${base_sbindir}
> - mv ${D}/busybox${base_sbindir}/hwclock ${D}${base_sbindir}/
> -
> + install -d ${D}${sysconfdir}/default
> install -m 0755 ${WORKDIR}/hwclock.sh ${D}${sysconfdir}/init.d/
> fi
> if grep "CONFIG_UDHCPC=y" ${WORKDIR}/defconfig; then
> - # Move dhcpc back to /usr/sbin/udhcpc
> - install -d ${D}${base_sbindir}
> - mv ${D}/busybox${base_sbindir}/udhcpc ${D}${base_sbindir}/
> -
> install -d ${D}${sysconfdir}/udhcpc.d
> install -d ${D}${datadir}/udhcpc
> - install -m 0755 ${S}/examples/udhcp/simple.script ${D}${sysconfdir}/udhcpc.d/50default
> + install -m 0755 ${WORKDIR}/simple.script ${D}${sysconfdir}/udhcpc.d/50default
> install -m 0755 ${WORKDIR}/default.script ${D}${datadir}/udhcpc/default.script
> install -m 0755 ${WORKDIR}/busybox-udhcpc ${D}${sysconfdir}/init.d/
> fi
> - if grep "CONFIG_MDEV=y" ${WORKDIR}/defconfig; then
> - install -m 0755 ${WORKDIR}/mdev ${D}${sysconfdir}/init.d/mdev
> - if grep "CONFIG_FEATURE_MDEV_CONF=y" ${WORKDIR}/defconfig; then
> - install -m 644 ${WORKDIR}/mdev.conf ${D}${sysconfdir}/mdev.conf
> - fi
> + if grep "CONFIG_INETD=y" ${WORKDIR}/defconfig; then
> + install -m 0755 ${WORKDIR}/inetd ${D}${sysconfdir}/init.d/inetd.${PN}
> + install -m 0644 ${WORKDIR}/inetd.conf ${D}${sysconfdir}/
> + fi
> + if grep "CONFIG_MDEV=y" ${WORKDIR}/defconfig; then
> + install -m 0755 ${WORKDIR}/mdev ${D}${sysconfdir}/init.d/mdev
> + if grep "CONFIG_FEATURE_MDEV_CONF=y" ${WORKDIR}/defconfig; then
> + install -m 644 ${WORKDIR}/mdev.conf ${D}${sysconfdir}/mdev.conf
> + fi
> fi
> -
> install -m 0644 ${S}/busybox.links ${D}${sysconfdir}
> -
> - # remove the temp dir to suppress warning, we are done with it
> - rm -rf ${D}/busybox
> }
>
> pkg_postinst_${PN} () {
> diff --git a/meta/recipes-core/busybox/busybox_1.18.4.bb b/meta/recipes-core/busybox/busybox_1.18.4.bb
> index cf37650..a5080d5 100644
> --- a/meta/recipes-core/busybox/busybox_1.18.4.bb
> +++ b/meta/recipes-core/busybox/busybox_1.18.4.bb
> @@ -1,5 +1,5 @@
> require busybox.inc
> -PR = "r1"
> +PR = "r2"
>
> SRC_URI = "http://www.busybox.net/downloads/busybox-${PV}.tar.bz2;name=tarball \
> file://udhcpscript.patch \
next prev parent reply other threads:[~2011-05-31 13:34 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-24 13:13 [PATCH] busybox: sync do_install() with oe master (mostly) Phil Blundell
2011-05-26 10:08 ` [PATCH v2] " Phil Blundell
2011-05-31 13:31 ` Phil Blundell [this message]
2011-06-03 0:05 ` Saul Wold
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1306848673.2525.493.camel@phil-desktop \
--to=pb@pbcl.net \
--cc=openembedded-core@lists.openembedded.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.