All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Eric Bénard" <eric@eukrea.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 2/5] include/asm/arch-at91: update several .h files to ATMEL_xxx name scheme
Date: Tue,  7 Jun 2011 08:35:05 +0200	[thread overview]
Message-ID: <1307428508-26058-2-git-send-email-eric@eukrea.com> (raw)
In-Reply-To: <1307428508-26058-1-git-send-email-eric@eukrea.com>

Signed-off-by: Eric B?nard <eric@eukrea.com>
---
 arch/arm/include/asm/arch-at91/at91_matrix.h     |   10 +++---
 arch/arm/include/asm/arch-at91/at91_rstc.h       |    2 +-
 arch/arm/include/asm/arch-at91/at91_wdt.h        |    2 +-
 arch/arm/include/asm/arch-at91/at91sam9_sdramc.h |   30 +++++++++++-----------
 arch/arm/include/asm/arch-at91/at91sam9_smc.h    |   12 ++++----
 5 files changed, 28 insertions(+), 28 deletions(-)

diff --git a/arch/arm/include/asm/arch-at91/at91_matrix.h b/arch/arm/include/asm/arch-at91/at91_matrix.h
index f99b1d4..a9ba9e9 100644
--- a/arch/arm/include/asm/arch-at91/at91_matrix.h
+++ b/arch/arm/include/asm/arch-at91/at91_matrix.h
@@ -26,18 +26,18 @@
 #ifdef __ASSEMBLY__
 
 #if defined(CONFIG_AT91SAM9260) || defined(CONFIG_AT91SAM9G20)
-#define AT91_ASM_MATRIX_CSA0	(AT91_MATRIX_BASE + 0x11C)
+#define AT91_ASM_MATRIX_CSA0	(ATMEL_BASE_MATRIX + 0x11C)
 #elif defined(CONFIG_AT91SAM9261)
-#define AT91_ASM_MATRIX_CSA0	(AT91_MATRIX_BASE + 0x30)
+#define AT91_ASM_MATRIX_CSA0	(ATMEL_BASE_MATRIX + 0x30)
 #elif defined(CONFIG_AT91SAM9263)
-#define AT91_ASM_MATRIX_CSA0	(AT91_MATRIX_BASE + 0x120)
+#define AT91_ASM_MATRIX_CSA0	(ATMEL_BASE_MATRIX + 0x120)
 #elif defined(CONFIG_AT91SAM9G45)
-#define AT91_ASM_MATRIX_CSA0	(AT91_MATRIX_BASE + 0x128)
+#define AT91_ASM_MATRIX_CSA0	(ATMEL_BASE_MATRIX + 0x128)
 #else
 #error AT91_ASM_MATRIX_CSA0 is not definied for current CPU
 #endif
 
-#define AT91_ASM_MATRIX_MCFG	AT91_MATRIX_BASE
+#define AT91_ASM_MATRIX_MCFG	ATMEL_BASE_MATRIX
 
 #else
 #if defined(CONFIG_AT91SAM9260) || defined(CONFIG_AT91SAM9G20)
diff --git a/arch/arm/include/asm/arch-at91/at91_rstc.h b/arch/arm/include/asm/arch-at91/at91_rstc.h
index 510eed5..15ffd18 100644
--- a/arch/arm/include/asm/arch-at91/at91_rstc.h
+++ b/arch/arm/include/asm/arch-at91/at91_rstc.h
@@ -16,7 +16,7 @@
 #ifndef AT91_RSTC_H
 #define AT91_RSTC_H
 
-#define AT91_ASM_RSTC_MR	(AT91_RSTC_BASE + 0x08)
+#define AT91_ASM_RSTC_MR	(ATMEL_BASE_RSTC + 0x08)
 
 #ifndef __ASSEMBLY__
 
diff --git a/arch/arm/include/asm/arch-at91/at91_wdt.h b/arch/arm/include/asm/arch-at91/at91_wdt.h
index cf08daf..dc22ea1 100644
--- a/arch/arm/include/asm/arch-at91/at91_wdt.h
+++ b/arch/arm/include/asm/arch-at91/at91_wdt.h
@@ -19,7 +19,7 @@
 
 #ifdef __ASSEMBLY__
 
-#define AT91_ASM_WDT_MR	(AT91_WDT_BASE +  0x04)
+#define AT91_ASM_WDT_MR	(ATMEL_BASE_WDT +  0x04)
 
 #else
 
diff --git a/arch/arm/include/asm/arch-at91/at91sam9_sdramc.h b/arch/arm/include/asm/arch-at91/at91sam9_sdramc.h
index c3da3a6..54159a7 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9_sdramc.h
+++ b/arch/arm/include/asm/arch-at91/at91sam9_sdramc.h
@@ -19,19 +19,19 @@
 
 #ifdef __ASSEMBLY__
 
-#ifndef AT91_SDRAMC_BASE
-#define AT91_SDRAMC_BASE	AT91_SDRAMC0_BASE
+#ifndef ATMEL_BASE_SDRAMC
+#define ATMEL_BASE_SDRAMC	AT91_SDRAMC0_BASE
 #endif
 
-#define AT91_ASM_SDRAMC_MR	AT91_SDRAMC_BASE
-#define AT91_ASM_SDRAMC_TR	(AT91_SDRAMC_BASE + 0x04)
-#define AT91_ASM_SDRAMC_CR	(AT91_SDRAMC_BASE + 0x08)
-#define AT91_ASM_SDRAMC_MDR	(AT91_SDRAMC_BASE + 0x24)
+#define AT91_ASM_SDRAMC_MR	ATMEL_BASE_SDRAMC
+#define AT91_ASM_SDRAMC_TR	(ATMEL_BASE_SDRAMC + 0x04)
+#define AT91_ASM_SDRAMC_CR	(ATMEL_BASE_SDRAMC + 0x08)
+#define AT91_ASM_SDRAMC_MDR	(ATMEL_BASE_SDRAMC + 0x24)
 
 #endif
 
 /* SDRAM Controller (SDRAMC) registers */
-#define AT91_SDRAMC_MR		(AT91_SDRAMC + 0x00)	/* SDRAM Controller Mode Register */
+#define AT91_SDRAMC_MR		(ATMEL_BASE_SDRAMC + 0x00)	/* SDRAM Controller Mode Register */
 #define		AT91_SDRAMC_MODE	(0xf << 0)		/* Command Mode */
 #define			AT91_SDRAMC_MODE_NORMAL		0
 #define			AT91_SDRAMC_MODE_NOP		1
@@ -41,10 +41,10 @@
 #define			AT91_SDRAMC_MODE_EXT_LMR	5
 #define			AT91_SDRAMC_MODE_DEEP		6
 
-#define AT91_SDRAMC_TR		(AT91_SDRAMC + 0x04)	/* SDRAM Controller Refresh Timer Register */
+#define AT91_SDRAMC_TR		(ATMEL_BASE_SDRAMC + 0x04)	/* SDRAM Controller Refresh Timer Register */
 #define		AT91_SDRAMC_COUNT	(0xfff << 0)		/* Refresh Timer Counter */
 
-#define AT91_SDRAMC_CR		(AT91_SDRAMC + 0x08)	/* SDRAM Controller Configuration Register */
+#define AT91_SDRAMC_CR		(ATMEL_BASE_SDRAMC + 0x08)	/* SDRAM Controller Configuration Register */
 #define		AT91_SDRAMC_NC		(3 << 0)		/* Number of Column Bits */
 #define			AT91_SDRAMC_NC_8	(0 << 0)
 #define			AT91_SDRAMC_NC_9	(1 << 0)
@@ -71,7 +71,7 @@
 #define		AT91_SDRAMC_TRAS	(0xf << 24)		/* Active to Precharge Delay */
 #define		AT91_SDRAMC_TXSR	(0xf << 28)		/* Exit Self Refresh to Active Delay */
 
-#define AT91_SDRAMC_LPR		(AT91_SDRAMC + 0x10)	/* SDRAM Controller Low Power Register */
+#define AT91_SDRAMC_LPR		(ATMEL_BASE_SDRAMC + 0x10)	/* SDRAM Controller Low Power Register */
 #define		AT91_SDRAMC_LPCB		(3 << 0)	/* Low-power Configurations */
 #define			AT91_SDRAMC_LPCB_DISABLE		0
 #define			AT91_SDRAMC_LPCB_SELF_REFRESH		1
@@ -85,13 +85,13 @@
 #define			AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES	(1 << 12)
 #define			AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES	(2 << 12)
 
-#define AT91_SDRAMC_IER		(AT91_SDRAMC + 0x14)	/* SDRAM Controller Interrupt Enable Register */
-#define AT91_SDRAMC_IDR		(AT91_SDRAMC + 0x18)	/* SDRAM Controller Interrupt Disable Register */
-#define AT91_SDRAMC_IMR		(AT91_SDRAMC + 0x1C)	/* SDRAM Controller Interrupt Mask Register */
-#define AT91_SDRAMC_ISR		(AT91_SDRAMC + 0x20)	/* SDRAM Controller Interrupt Status Register */
+#define AT91_SDRAMC_IER		(ATMEL_BASE_SDRAMC + 0x14)	/* SDRAM Controller Interrupt Enable Register */
+#define AT91_SDRAMC_IDR		(ATMEL_BASE_SDRAMC + 0x18)	/* SDRAM Controller Interrupt Disable Register */
+#define AT91_SDRAMC_IMR		(ATMEL_BASE_SDRAMC + 0x1C)	/* SDRAM Controller Interrupt Mask Register */
+#define AT91_SDRAMC_ISR		(ATMEL_BASE_SDRAMC + 0x20)	/* SDRAM Controller Interrupt Status Register */
 #define		AT91_SDRAMC_RES		(1 << 0)		/* Refresh Error Status */
 
-#define AT91_SDRAMC_MDR		(AT91_SDRAMC + 0x24)	/* SDRAM Memory Device Register */
+#define AT91_SDRAMC_MDR		(ATMEL_BASE_SDRAMC + 0x24)	/* SDRAM Memory Device Register */
 #define		AT91_SDRAMC_MD		(3 << 0)		/* Memory Device Type */
 #define			AT91_SDRAMC_MD_SDRAM		0
 #define			AT91_SDRAMC_MD_LOW_POWER_SDRAM	1
diff --git a/arch/arm/include/asm/arch-at91/at91sam9_smc.h b/arch/arm/include/asm/arch-at91/at91sam9_smc.h
index d180c8a..2ea2791 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9_smc.h
+++ b/arch/arm/include/asm/arch-at91/at91sam9_smc.h
@@ -18,14 +18,14 @@
 
 #ifdef __ASSEMBLY__
 
-#ifndef AT91_SMC_BASE
-#define AT91_SMC_BASE	AT91_SMC0_BASE
+#ifndef ATMEL_BASE_SMC
+#define ATMEL_BASE_SMC	ATMEL_BASE_SMC0
 #endif
 
-#define AT91_ASM_SMC_SETUP0	AT91_SMC_BASE
-#define AT91_ASM_SMC_PULSE0	(AT91_SMC_BASE + 0x04)
-#define AT91_ASM_SMC_CYCLE0	(AT91_SMC_BASE + 0x08)
-#define AT91_ASM_SMC_MODE0	(AT91_SMC_BASE + 0x0C)
+#define AT91_ASM_SMC_SETUP0	ATMEL_BASE_SMC
+#define AT91_ASM_SMC_PULSE0	(ATMEL_BASE_SMC + 0x04)
+#define AT91_ASM_SMC_CYCLE0	(ATMEL_BASE_SMC + 0x08)
+#define AT91_ASM_SMC_MODE0	(ATMEL_BASE_SMC + 0x0C)
 
 #else
 
-- 
1.7.4.4

  reply	other threads:[~2011-06-07  6:35 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-06-07  6:35 [U-Boot] [PATCH 1/5] at91sam9260_devices: fix following atmal rework Eric Bénard
2011-06-07  6:35 ` Eric Bénard [this message]
2011-06-07  6:35 ` [U-Boot] [PATCH 3/5] arm926ejs/at91/lowlevel_init.S: temporary fix Eric Bénard
2011-06-07  8:04   ` Reinhard Meyer
2011-06-07  8:32     ` Eric Bénard
2011-06-07  6:35 ` [U-Boot] [PATCH 4/5] cpu9260/9G20: fix board support Eric Bénard
2011-06-07  6:35 ` [U-Boot] [PATCH 5/5] cpuat91: " Eric Bénard
2011-06-07  7:56 ` [U-Boot] [PATCH 1/5] at91sam9260_devices: fix following atmal rework Reinhard Meyer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1307428508-26058-2-git-send-email-eric@eukrea.com \
    --to=eric@eukrea.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.