From: Tatyana Brokhman <tlinder-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
To: greg-U8xfFu+wG4EAvxtiuMwx3w@public.gmane.org
Cc: linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
balbi-l0cyMroinI0@public.gmane.org,
ablay-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
Tatyana Brokhman
<tlinder-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Subject: [PATCH/RFC 0/5] usb:tools: usb unittests framework
Date: Thu, 16 Jun 2011 16:28:47 +0300 [thread overview]
Message-ID: <1308230936-23897-1-git-send-email-tlinder@codeaurora.org> (raw)
This patch seriese introduces a user-space framework for developing unit tests in
order to test the USB functionality of a connected device.
These tests communicate with the USB device via libusb interface.
They are meant to run with the g_zero and dummy_hcd module since several
proprietary control messages were added to those modules. But a smaller
subset of the tests can be run on any USB device and on real UDCs.
Tatyana Brokhman (5):
usb unittests framework
usb:dummy_hcd: connect/disconnect test support
usb:g_zero: bulk in/out unittest support
usb: dummy_hcd: Disable single-request fifo in dummy hcd
usb: Add support for streams alloc/dealloc to devio.c
drivers/usb/core/devio.c | 128 ++-
drivers/usb/gadget/dummy_hcd.c | 74 +-
drivers/usb/gadget/f_sourcesink.c | 12 +
include/linux/usbdevice_fs.h | 5 +
.../usb/unittests/Documentation/autoconfig_readme | 20 +
.../usb/unittests/Documentation/create-gadget-img | 47 +
tools/usb/unittests/Documentation/unittests-info | 526 +++++
tools/usb/unittests/Documentation/unittests-setup | 127 ++
.../0001-Add-support-to-USB3-descriptors.patch | 420 ++++
...2-Add-support-for-libusb_get_device_speed.patch | 172 ++
.../libusb_patches/0003-Add-UAS-defines.patch | 56 +
.../0004-libusb-Add-stream-support-to-LIBUSB.patch | 314 +++
tools/usb/unittests/make/Makefile | 132 ++
tools/usb/unittests/make/autoconfig.sh | 118 ++
tools/usb/unittests/usb/UASP_CMD_tests.cc | 2140 ++++++++++++++++++++
tools/usb/unittests/usb/UASP_TM_tests.cc | 1207 +++++++++++
tools/usb/unittests/usb/UASP_tests.h | 434 ++++
tools/usb/unittests/usb/composite_tests.cc | 1645 +++++++++++++++
tools/usb/unittests/usb/composite_tests.h | 293 +++
tools/usb/unittests/usb/g_serial_tests.cc | 198 ++
tools/usb/unittests/usb/g_serial_tests.h | 68 +
tools/usb/unittests/usb/hs_expected_desc.h | 164 ++
tools/usb/unittests/usb/libusb_utils.cc | 358 ++++
tools/usb/unittests/usb/libusb_utils.h | 149 ++
tools/usb/unittests/usb/ss_expected_desc.h | 291 +++
tools/usb/unittests/usb/streams_tests.cc | 243 +++
tools/usb/unittests/usb/streams_tests.h | 51 +
tools/usb/unittests/usb/usb_devel_mode.cc | 185 ++
tools/usb/unittests/usb/usb_devel_mode.h | 50 +
tools/usb/unittests/usb/usb_tests.cc | 651 ++++++
tools/usb/unittests/usb/usb_tests.h | 146 ++
tools/usb/unittests/usb/usb_tests_main.cc | 83 +
tools/usb/unittests/usb/ut_config.h | 89 +
33 files changed, 10570 insertions(+), 26 deletions(-)
create mode 100644 tools/usb/unittests/Documentation/autoconfig_readme
create mode 100644 tools/usb/unittests/Documentation/create-gadget-img
create mode 100644 tools/usb/unittests/Documentation/unittests-info
create mode 100644 tools/usb/unittests/Documentation/unittests-setup
create mode 100644 tools/usb/unittests/libusb_patches/0001-Add-support-to-USB3-descriptors.patch
create mode 100644 tools/usb/unittests/libusb_patches/0002-Add-support-for-libusb_get_device_speed.patch
create mode 100644 tools/usb/unittests/libusb_patches/0003-Add-UAS-defines.patch
create mode 100644 tools/usb/unittests/libusb_patches/0004-libusb-Add-stream-support-to-LIBUSB.patch
create mode 100644 tools/usb/unittests/make/Makefile
create mode 100644 tools/usb/unittests/make/autoconfig.sh
create mode 100644 tools/usb/unittests/usb/UASP_CMD_tests.cc
create mode 100644 tools/usb/unittests/usb/UASP_TM_tests.cc
create mode 100644 tools/usb/unittests/usb/UASP_tests.h
create mode 100644 tools/usb/unittests/usb/composite_tests.cc
create mode 100644 tools/usb/unittests/usb/composite_tests.h
create mode 100644 tools/usb/unittests/usb/g_serial_tests.cc
create mode 100644 tools/usb/unittests/usb/g_serial_tests.h
create mode 100644 tools/usb/unittests/usb/hs_expected_desc.h
create mode 100644 tools/usb/unittests/usb/libusb_utils.cc
create mode 100644 tools/usb/unittests/usb/libusb_utils.h
create mode 100644 tools/usb/unittests/usb/ss_expected_desc.h
create mode 100644 tools/usb/unittests/usb/streams_tests.cc
create mode 100644 tools/usb/unittests/usb/streams_tests.h
create mode 100644 tools/usb/unittests/usb/usb_devel_mode.cc
create mode 100644 tools/usb/unittests/usb/usb_devel_mode.h
create mode 100644 tools/usb/unittests/usb/usb_tests.cc
create mode 100644 tools/usb/unittests/usb/usb_tests.h
create mode 100644 tools/usb/unittests/usb/usb_tests_main.cc
create mode 100644 tools/usb/unittests/usb/ut_config.h
--
1.7.3.3
--
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2011-06-16 13:28 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-16 13:28 Tatyana Brokhman [this message]
[not found] ` <1308230936-23897-1-git-send-email-tlinder-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2011-06-16 15:03 ` [PATCH/RFC 0/5] usb:tools: usb unittests framework Sergei Shtylyov
2011-06-16 19:51 ` Tanya Brokhman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1308230936-23897-1-git-send-email-tlinder@codeaurora.org \
--to=tlinder-sgv2jx0feol9jmxxk+q4oq@public.gmane.org \
--cc=ablay-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=balbi-l0cyMroinI0@public.gmane.org \
--cc=greg-U8xfFu+wG4EAvxtiuMwx3w@public.gmane.org \
--cc=linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.