From: Mike Frysinger <vapier@gentoo.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 07/18] Blackfin: post: setup default CONFIG_SYS_POST_WORD_ADDR
Date: Tue, 28 Jun 2011 15:36:16 -0400 [thread overview]
Message-ID: <1309289787-7846-8-git-send-email-vapier@gentoo.org> (raw)
In-Reply-To: <1309289787-7846-1-git-send-email-vapier@gentoo.org>
Set the default post word location to an L1 data location for all
Blackfin parts so things "just work" for most people.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
arch/blackfin/include/asm/config.h | 3 +++
include/configs/bf537-stamp.h | 1 -
2 files changed, 3 insertions(+), 1 deletions(-)
diff --git a/arch/blackfin/include/asm/config.h b/arch/blackfin/include/asm/config.h
index 89814cd..bc3c252 100644
--- a/arch/blackfin/include/asm/config.h
+++ b/arch/blackfin/include/asm/config.h
@@ -121,6 +121,9 @@
#ifndef CONFIG_SYS_MEMTEST_END
# define CONFIG_SYS_MEMTEST_END (CONFIG_STACKBASE - 8192 + 4)
#endif
+#ifndef CONFIG_SYS_POST_WORD_ADDR
+# define CONFIG_SYS_POST_WORD_ADDR (L1_DATA_B_SRAM + L1_DATA_B_SRAM_SIZE - 4)
+#endif
/* Check to make sure everything fits in external RAM */
#if CONFIG_SYS_MAX_RAM_SIZE && \
diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h
index c31e914..da14a4f 100644
--- a/include/configs/bf537-stamp.h
+++ b/include/configs/bf537-stamp.h
@@ -260,7 +260,6 @@
#define FLASH_START_POST_BLOCK 11 /* Should > = 11 */
#define FLASH_END_POST_BLOCK 71 /* Should < = 71 */
#endif
-#define CONFIG_SYS_POST_WORD_ADDR 0xFF903FFC
/* These are for board tests */
#if 0
--
1.7.5.3
next prev parent reply other threads:[~2011-06-28 19:36 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-28 19:36 [U-Boot] [PATCH 00/18] Blackfin updates for v2011.09 Mike Frysinger
2011-06-28 19:36 ` [U-Boot] [PATCH 01/18] Blackfin: uart: move debug buffers into local bss Mike Frysinger
2011-06-28 19:36 ` [U-Boot] [PATCH 02/18] Blackfin: uart: add multiple serial support Mike Frysinger
2011-06-28 19:36 ` [U-Boot] [PATCH 03/18] Blackfin: adi boards: enable multi serial support by default Mike Frysinger
2011-06-28 19:36 ` [U-Boot] [PATCH 04/18] Blackfin: dont reset SWRST on newer bf526 parts Mike Frysinger
2011-07-05 5:24 ` [U-Boot] [PATCH v2] " Mike Frysinger
2011-06-28 19:36 ` [U-Boot] [PATCH 05/18] Blackfin: add init.elf helper code Mike Frysinger
2011-06-28 19:36 ` [U-Boot] [PATCH 06/18] Blackfin: uart: fix printf warning Mike Frysinger
2011-06-28 19:36 ` Mike Frysinger [this message]
2011-06-28 19:36 ` [U-Boot] [PATCH 08/18] Blackfin: gpio: optimize free path a little Mike Frysinger
2011-06-28 19:36 ` [U-Boot] [PATCH 09/18] Blackfin: sync MMR read/write helpers with Linux Mike Frysinger
2011-06-28 19:36 ` [U-Boot] [PATCH 10/18] Blackfin: cm-bf537e/cm-bf537u/tcm-bf537: update network settings Mike Frysinger
2011-06-28 19:36 ` [U-Boot] [PATCH 11/18] Blackfin: cm-bf537e/cm-bf537u/tcm-bf537: enable mmc_spi support Mike Frysinger
2011-06-28 19:36 ` [U-Boot] [PATCH 12/18] Blackfin: portmux: allow header to be included in assembly files Mike Frysinger
2011-06-28 19:36 ` [U-Boot] [PATCH 13/18] Blackfin: drop unused dma.h header from start code Mike Frysinger
2011-06-28 19:36 ` [U-Boot] [PATCH 14/18] Blackfin: adi boards: enable pretty flash progress output Mike Frysinger
2011-06-28 19:36 ` [U-Boot] [PATCH 15/18] Blackfin: split out async setup Mike Frysinger
2011-06-28 19:36 ` [U-Boot] [PATCH 16/18] Blackfin: serial: convert to bfin_{read, write} helpers Mike Frysinger
2011-06-28 19:36 ` [U-Boot] [PATCH 17/18] Blackfin: update anomaly lists to latest public info Mike Frysinger
2011-06-28 19:36 ` [U-Boot] [PATCH 18/18] Blackfin: adi boards: also set stderr to nc with helper Mike Frysinger
2011-06-29 2:50 ` [U-Boot] Pull request u-boot-blackfin.git Mike Frysinger
2011-06-29 21:23 ` Wolfgang Denk
2011-06-30 15:45 ` Mike Frysinger
2011-06-30 15:55 ` Wolfgang Denk
2011-06-29 21:23 ` [U-Boot] [PATCH 00/18] Blackfin updates for v2011.09 Wolfgang Denk
2011-06-30 17:23 ` Mike Frysinger
2011-07-05 5:25 ` [U-Boot] [PATCH 19/21] Blackfin: serial: move early debug strings into .rodata section Mike Frysinger
2011-07-05 5:25 ` [U-Boot] [PATCH 20/21] Blackfin: switch to common display_options() Mike Frysinger
2011-07-05 5:25 ` [U-Boot] [PATCH 21/21] Blackfin: jtag-console: fix timer usage Mike Frysinger
2011-07-12 6:21 ` [U-Boot] [PATCH 00/18] Blackfin updates for v2011.09 Mike Frysinger
2011-07-12 6:23 ` [U-Boot] Pull request u-boot-blackfin.git Mike Frysinger
2011-08-02 19:49 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1309289787-7846-8-git-send-email-vapier@gentoo.org \
--to=vapier@gentoo.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.