From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Liam Girdwood <lrg@ti.com>, Grant Likely <grant@secretlab.ca>
Cc: alsa-devel@alsa-project.org, patches@opensource.wolfsonmicro.com,
Mark Brown <broonie@opensource.wolfsonmicro.com>,
devicetree-discuss@lists.ozlabs.com
Subject: [PATCH] ASoC: Add device tree binding for WM8731
Date: Tue, 26 Jul 2011 21:02:11 +0100 [thread overview]
Message-ID: <1311710531-25165-1-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
Tested with the famous "hey, look! this compiles" test plan.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
Documentation/devicetree/bindings/sound/wm8731.txt | 18 ++++++++++++++++++
sound/soc/codecs/wm8731.c | 12 ++++++++++++
2 files changed, 30 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/sound/wm8731.txt
diff --git a/Documentation/devicetree/bindings/sound/wm8731.txt b/Documentation/devicetree/bindings/sound/wm8731.txt
new file mode 100644
index 0000000..15f7004
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/wm8731.txt
@@ -0,0 +1,18 @@
+WM8731 audio CODEC
+
+This device supports both I2C and SPI (configured with pin strapping
+on the board).
+
+Required properties:
+
+ - compatible : "wlf,wm8731"
+
+ - reg : the I2C address of the device for I2C, the chip select
+ number for SPI.
+
+Example:
+
+codec: wm8731@1a {
+ compatible = "wlf,wm8731";
+ reg = <0x1a>;
+};
diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c
index 76b4361..5ecc05a 100644
--- a/sound/soc/codecs/wm8731.c
+++ b/sound/soc/codecs/wm8731.c
@@ -22,6 +22,7 @@
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/spi/spi.h>
+#include <linux/of_device.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
@@ -607,6 +608,11 @@ static struct snd_soc_codec_driver soc_codec_dev_wm8731 = {
.num_dapm_routes = ARRAY_SIZE(wm8731_intercon),
};
+static const struct of_device_id wm8731_of_match[] = {
+ { .compatible = "wlf,wm8731", },
+ { }
+};
+
#if defined(CONFIG_SPI_MASTER)
static int __devinit wm8731_spi_probe(struct spi_device *spi)
{
@@ -634,10 +640,13 @@ static int __devexit wm8731_spi_remove(struct spi_device *spi)
return 0;
}
+MODULE_DEVICE_TABLE(spi, wm8731_of_match);
+
static struct spi_driver wm8731_spi_driver = {
.driver = {
.name = "wm8731",
.owner = THIS_MODULE,
+ .of_match_table = wm8731_of_match,
},
.probe = wm8731_spi_probe,
.remove = __devexit_p(wm8731_spi_remove),
@@ -678,10 +687,13 @@ static const struct i2c_device_id wm8731_i2c_id[] = {
};
MODULE_DEVICE_TABLE(i2c, wm8731_i2c_id);
+MODULE_DEVICE_TABLE(i2c, wm8731_of_match);
+
static struct i2c_driver wm8731_i2c_driver = {
.driver = {
.name = "wm8731",
.owner = THIS_MODULE,
+ .of_match_table = wm8731_of_match,
},
.probe = wm8731_i2c_probe,
.remove = __devexit_p(wm8731_i2c_remove),
--
1.7.5.4
next reply other threads:[~2011-07-26 20:02 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-26 20:02 Mark Brown [this message]
2011-07-27 10:39 ` [PATCH] ASoC: Add device tree binding for WM8731 Liam Girdwood
[not found] <4e2f1db6.43f42a0a.523f.fffffa25SMTPIN_ADDED@mx.google.com>
2011-07-28 22:26 ` Grant Likely
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1311710531-25165-1-git-send-email-broonie@opensource.wolfsonmicro.com \
--to=broonie@opensource.wolfsonmicro.com \
--cc=alsa-devel@alsa-project.org \
--cc=devicetree-discuss@lists.ozlabs.com \
--cc=grant@secretlab.ca \
--cc=lrg@ti.com \
--cc=patches@opensource.wolfsonmicro.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.