From: Thomas Pedersen <thomas@cozybit.com>
To: linux-wireless@vger.kernel.org
Cc: Thomas Pedersen <thomas@cozybit.com>,
johannes@sipsolutions.net, linville@tuxdriver.com
Subject: [PATCH 1/6] mac80211: fix mesh beacon format
Date: Tue, 9 Aug 2011 12:50:13 -0700 [thread overview]
Message-ID: <1312919418-32196-2-git-send-email-thomas@cozybit.com> (raw)
In-Reply-To: <1312919418-32196-1-git-send-email-thomas@cozybit.com>
Correct ordering of IEs in the mesh beacon while removing unneeded IEs
from mesh peering frames. Set privacy bit in capability info if security
is enabled. Add utility functions to aid in construction
of IEs and reduce code duplication.
Signed-off-by: Thomas Pedersen <thomas@cozybit.com>
---
net/mac80211/mesh.c | 223 +++++++++++++++++++++++++++++++++------------
net/mac80211/mesh.h | 14 +++
net/mac80211/mesh_plink.c | 7 +-
net/mac80211/tx.c | 14 +++-
4 files changed, 196 insertions(+), 62 deletions(-)
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index 29e9980..1990869 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -204,36 +204,185 @@ int mesh_rmc_check(u8 *sa, struct ieee80211s_hdr *mesh_hdr,
return 0;
}
-void mesh_mgmt_ies_add(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata)
+int
+mesh_add_meshconf_ie(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata)
+{
+ struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
+ u8 *pos, neighbors;
+ u8 meshconf_len = sizeof(struct ieee80211_meshconf_ie);
+
+ if (skb_tailroom(skb) < 2 + meshconf_len)
+ return -ENOMEM;
+
+ pos = skb_put(skb, 2 + meshconf_len);
+ *pos++ = WLAN_EID_MESH_CONFIG;
+ *pos++ = meshconf_len;
+
+ /* Active path selection protocol ID */
+ *pos++ = ifmsh->mesh_pp_id;
+ /* Active path selection metric ID */
+ *pos++ = ifmsh->mesh_pm_id;
+ /* Congestion control mode identifier */
+ *pos++ = ifmsh->mesh_cc_id;
+ /* Synchronization protocol identifier */
+ *pos++ = ifmsh->mesh_sp_id;
+ /* Authentication Protocol identifier */
+ *pos++ = ifmsh->mesh_auth_id;
+ /* Mesh Formation Info - number of neighbors */
+ neighbors = atomic_read(&ifmsh->mshstats.estab_plinks);
+ /* Number of neighbor mesh STAs or 15 whichever is smaller */
+ neighbors = (neighbors > 15) ? 15 : neighbors;
+ *pos++ = neighbors << 1;
+ /* Mesh capability */
+ ifmsh->accepting_plinks = mesh_plink_availables(sdata);
+ *pos = MESHCONF_CAPAB_FORWARDING;
+ *pos++ |= ifmsh->accepting_plinks ?
+ MESHCONF_CAPAB_ACCEPT_PLINKS : 0x00;
+ *pos++ = 0x00;
+
+ return 0;
+}
+
+int
+mesh_add_meshid_ie(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata)
+{
+ struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
+ u8 *pos;
+
+ if (skb_tailroom(skb) < 2 + ifmsh->mesh_id_len)
+ return -ENOMEM;
+
+ pos = skb_put(skb, 2 + ifmsh->mesh_id_len);
+ *pos++ = WLAN_EID_MESH_ID;
+ *pos++ = ifmsh->mesh_id_len;
+ if (ifmsh->mesh_id_len)
+ memcpy(pos, ifmsh->mesh_id, ifmsh->mesh_id_len);
+
+ return 0;
+}
+
+int
+mesh_add_vendor_ies(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata)
+{
+ struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
+ u8 offset, len;
+ const u8 *data;
+
+ if (!ifmsh->ie || !ifmsh->ie_len)
+ return 0;
+
+ /* fast-forward to vendor IEs */
+ offset = ieee80211_ie_split_vendor(ifmsh->ie, ifmsh->ie_len, 0);
+
+ if (offset) {
+ len = ifmsh->ie_len - offset;
+ data = ifmsh->ie + offset;
+ if (skb_tailroom(skb) < len)
+ return -ENOMEM;
+ memcpy(skb_put(skb, len), data, len);
+ }
+
+ return 0;
+}
+
+int
+mesh_add_rsn_ie(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata)
+{
+ struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
+ u8 len = 0;
+ const u8 *data;
+
+ if (!ifmsh->ie || !ifmsh->ie_len)
+ return 0;
+
+ /* find RSN IE */
+ data = ifmsh->ie;
+ while (data < ifmsh->ie + ifmsh->ie_len) {
+ if (*data == WLAN_EID_RSN) {
+ len = data[1] + 2;
+ break;
+ }
+ data++;
+ }
+
+ if (len) {
+ if (skb_tailroom(skb) < len)
+ return -ENOMEM;
+ memcpy(skb_put(skb, len), data, len);
+ }
+
+ return 0;
+}
+
+int
+mesh_add_srates_ie(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata)
{
struct ieee80211_local *local = sdata->local;
struct ieee80211_supported_band *sband;
- u8 *pos;
- int len, i, rate;
- u8 neighbors;
+ int rate;
+ u8 i, rates, *pos;
sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
- len = sband->n_bitrates;
- if (len > 8)
- len = 8;
- pos = skb_put(skb, len + 2);
+ rates = sband->n_bitrates;
+ if (rates > 8)
+ rates = 8;
+
+ if (skb_tailroom(skb) < rates + 2)
+ return -ENOMEM;
+
+ pos = skb_put(skb, rates + 2);
*pos++ = WLAN_EID_SUPP_RATES;
- *pos++ = len;
- for (i = 0; i < len; i++) {
+ *pos++ = rates;
+ for (i = 0; i < rates; i++) {
rate = sband->bitrates[i].bitrate;
*pos++ = (u8) (rate / 5);
}
- if (sband->n_bitrates > len) {
- pos = skb_put(skb, sband->n_bitrates - len + 2);
+ return 0;
+}
+
+int
+mesh_add_ext_srates_ie(struct sk_buff *skb,
+ struct ieee80211_sub_if_data *sdata)
+{
+ struct ieee80211_local *local = sdata->local;
+ struct ieee80211_supported_band *sband;
+ int rate;
+ u8 i, exrates, *pos;
+
+ sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
+ exrates = sband->n_bitrates;
+ if (exrates > 8)
+ exrates -= 8;
+ else
+ exrates = 0;
+
+ if (skb_tailroom(skb) < exrates + 2)
+ return -ENOMEM;
+
+ if (exrates) {
+ pos = skb_put(skb, exrates + 2);
*pos++ = WLAN_EID_EXT_SUPP_RATES;
- *pos++ = sband->n_bitrates - len;
- for (i = len; i < sband->n_bitrates; i++) {
+ *pos++ = exrates;
+ for (i = 8; i < sband->n_bitrates; i++) {
rate = sband->bitrates[i].bitrate;
*pos++ = (u8) (rate / 5);
}
}
+ return 0;
+}
+
+int mesh_add_ds_params_ie(struct sk_buff *skb,
+ struct ieee80211_sub_if_data *sdata)
+{
+ struct ieee80211_local *local = sdata->local;
+ struct ieee80211_supported_band *sband;
+ u8 *pos;
+
+ if (skb_tailroom(skb) < 3)
+ return -ENOMEM;
+ sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
if (sband->band == IEEE80211_BAND_2GHZ) {
pos = skb_put(skb, 2 + 1);
*pos++ = WLAN_EID_DS_PARAMS;
@@ -241,53 +390,9 @@ void mesh_mgmt_ies_add(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata)
*pos++ = ieee80211_frequency_to_channel(local->hw.conf.channel->center_freq);
}
- pos = skb_put(skb, 2 + sdata->u.mesh.mesh_id_len);
- *pos++ = WLAN_EID_MESH_ID;
- *pos++ = sdata->u.mesh.mesh_id_len;
- if (sdata->u.mesh.mesh_id_len)
- memcpy(pos, sdata->u.mesh.mesh_id, sdata->u.mesh.mesh_id_len);
-
- pos = skb_put(skb, 2 + sizeof(struct ieee80211_meshconf_ie));
- *pos++ = WLAN_EID_MESH_CONFIG;
- *pos++ = sizeof(struct ieee80211_meshconf_ie);
-
- /* Active path selection protocol ID */
- *pos++ = sdata->u.mesh.mesh_pp_id;
-
- /* Active path selection metric ID */
- *pos++ = sdata->u.mesh.mesh_pm_id;
-
- /* Congestion control mode identifier */
- *pos++ = sdata->u.mesh.mesh_cc_id;
-
- /* Synchronization protocol identifier */
- *pos++ = sdata->u.mesh.mesh_sp_id;
-
- /* Authentication Protocol identifier */
- *pos++ = sdata->u.mesh.mesh_auth_id;
-
- /* Mesh Formation Info - number of neighbors */
- neighbors = atomic_read(&sdata->u.mesh.mshstats.estab_plinks);
- /* Number of neighbor mesh STAs or 15 whichever is smaller */
- neighbors = (neighbors > 15) ? 15 : neighbors;
- *pos++ = neighbors << 1;
-
- /* Mesh capability */
- sdata->u.mesh.accepting_plinks = mesh_plink_availables(sdata);
- *pos = MESHCONF_CAPAB_FORWARDING;
- *pos++ |= sdata->u.mesh.accepting_plinks ?
- MESHCONF_CAPAB_ACCEPT_PLINKS : 0x00;
- *pos++ = 0x00;
-
- if (sdata->u.mesh.ie) {
- int len = sdata->u.mesh.ie_len;
- const u8 *data = sdata->u.mesh.ie;
- if (skb_tailroom(skb) > len)
- memcpy(skb_put(skb, len), data, len);
- }
+ return 0;
}
-
static void ieee80211_mesh_path_timer(unsigned long data)
{
struct ieee80211_sub_if_data *sdata =
diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h
index 249e733..b794360 100644
--- a/net/mac80211/mesh.h
+++ b/net/mac80211/mesh.h
@@ -199,6 +199,20 @@ bool mesh_matches_local(struct ieee802_11_elems *ie,
void mesh_ids_set_default(struct ieee80211_if_mesh *mesh);
void mesh_mgmt_ies_add(struct sk_buff *skb,
struct ieee80211_sub_if_data *sdata);
+int mesh_add_meshconf_ie(struct sk_buff *skb,
+ struct ieee80211_sub_if_data *sdata);
+int mesh_add_meshid_ie(struct sk_buff *skb,
+ struct ieee80211_sub_if_data *sdata);
+int mesh_add_rsn_ie(struct sk_buff *skb,
+ struct ieee80211_sub_if_data *sdata);
+int mesh_add_vendor_ies(struct sk_buff *skb,
+ struct ieee80211_sub_if_data *sdata);
+int mesh_add_srates_ie(struct sk_buff *skb,
+ struct ieee80211_sub_if_data *sdata);
+int mesh_add_ext_srates_ie(struct sk_buff *skb,
+ struct ieee80211_sub_if_data *sdata);
+int mesh_add_ds_params_ie(struct sk_buff *skb,
+ struct ieee80211_sub_if_data *sdata);
void mesh_rmc_free(struct ieee80211_sub_if_data *sdata);
int mesh_rmc_init(struct ieee80211_sub_if_data *sdata);
void ieee80211s_init(void);
diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c
index f4adc09..d582059 100644
--- a/net/mac80211/mesh_plink.c
+++ b/net/mac80211/mesh_plink.c
@@ -195,7 +195,12 @@ static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata,
memset(pos, 0, 2);
memcpy(pos + 2, &plid, 2);
}
- mesh_mgmt_ies_add(skb, sdata);
+ if (mesh_add_srates_ie(skb, sdata) ||
+ mesh_add_ext_srates_ie(skb,sdata) ||
+ mesh_add_rsn_ie(skb, sdata) ||
+ mesh_add_meshid_ie(skb, sdata) ||
+ mesh_add_meshconf_ie(skb, sdata))
+ return -1;
}
/* Add Peer Link Management element */
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 8cb0d2d..41088ad 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -2275,13 +2275,23 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw,
memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN);
mgmt->u.beacon.beacon_int =
cpu_to_le16(sdata->vif.bss_conf.beacon_int);
- mgmt->u.beacon.capab_info = 0x0; /* 0x0 for MPs */
+ mgmt->u.beacon.capab_info |= sdata->u.mesh.security
+ ? WLAN_CAPABILITY_PRIVACY : 0;
pos = skb_put(skb, 2);
*pos++ = WLAN_EID_SSID;
*pos++ = 0x0;
- mesh_mgmt_ies_add(skb, sdata);
+ if (mesh_add_srates_ie(skb, sdata) ||
+ mesh_add_ds_params_ie(skb, sdata) ||
+ mesh_add_ext_srates_ie(skb, sdata) ||
+ mesh_add_rsn_ie(skb, sdata) ||
+ mesh_add_meshid_ie(skb, sdata) ||
+ mesh_add_meshconf_ie(skb, sdata) ||
+ mesh_add_vendor_ies(skb, sdata)) {
+ pr_err("o11s: couldn't add ies!\n");
+ goto out;
+ }
} else {
WARN_ON(1);
goto out;
--
1.7.6
next prev parent reply other threads:[~2011-08-09 19:51 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-09 19:50 [PATCH 0/6] mac80211: mesh frame formats Thomas Pedersen
2011-08-09 19:50 ` Thomas Pedersen [this message]
2011-08-10 13:37 ` [PATCH 1/6] mac80211: fix mesh beacon format Johannes Berg
2011-08-10 18:20 ` Thomas Pedersen
2011-08-09 19:50 ` [PATCH 2/6] ieee80211: introduce Self Protected Action codes Thomas Pedersen
2011-08-09 19:50 ` [PATCH 3/6] mac80211: update mesh peering frame codes Thomas Pedersen
2011-08-09 19:50 ` [PATCH 4/6] mac80211: update mesh peering frame format Thomas Pedersen
2011-08-09 19:50 ` [PATCH 5/6] ieee80211: add mesh action codes Thomas Pedersen
2011-08-09 19:50 ` [PATCH 6/6] mac80211: update mesh path selection frame format Thomas Pedersen
-- strict thread matches above, loose matches on Subject: below --
2011-07-25 23:59 [PATCH 0/6] update mesh frame formats Thomas Pedersen
2011-07-25 23:59 ` [PATCH 1/6] mac80211: fix mesh beacon format Thomas Pedersen
2011-08-08 13:21 ` Johannes Berg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1312919418-32196-2-git-send-email-thomas@cozybit.com \
--to=thomas@cozybit.com \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.