sensors gives various ALARM but my chipset w83697hf is listed as supported 
in: http://www.lm-sensors.org/wiki/Devices
    W83627HF, W83637HF, W83627THF, W83697HF yes    w83627hf LPC 2.6.5 
my PC works fine ...
the following messages are from UBUNTU Oneiric but I have similar messages from Natty and Maverick

may you help me?
thanks

corrado@corrado-oneiric:~$ uname -r
3.0.0-11-generic
corrado@corrado-oneiric:~$ sensors -v
sensors version 3.3.0 with libsensors version 3.3.0
corrado@corrado-oneiric:~$ sensors
coretemp-isa-0000
Adapter: ISA adapter
Core 0:       +52.0°C  (high = +78.0°C, crit = +100.0°C)
Core 1:       +52.0°C  (high = +78.0°C, crit = +100.0°C)

w83697hf-isa-0290
Adapter: ISA adapter
in0:          +1.31 V  (min =  +0.74 V, max =  +0.06 V)  ALARM
in2:          +3.23 V  (min =  +0.70 V, max =  +1.22 V)  ALARM
in3:          +3.02 V  (min =  +2.69 V, max =  +2.13 V)  ALARM
in4:          +2.96 V  (min =  +1.62 V, max =  +0.38 V)  ALARM
in5:          +3.07 V  (min =  +1.60 V, max =  +1.18 V)  ALARM
in6:          +3.18 V  (min =  +0.35 V, max =  +1.79 V)  ALARM
in7:          +3.30 V  (min =  +0.13 V, max =  +0.51 V)  ALARM
in8:          +3.41 V  (min =  +0.32 V, max =  +1.09 V)  ALARM
fan1:           0 RPM  (min = 3668 RPM, div = 8)  ALARM
fan2:        2596 RPM  (min = 2343 RPM, div = 8)
temp1:        +40.0°C  (high = +53.0°C, hyst = +60.0°C)  sensor = thermistor
temp2:        +38.5°C  (high = +80.0°C, hyst = +75.0°C)  sensor = thermistor
beep_enable: enabled

nouveau-pci-0200
Adapter: PCI adapter
temp1:        +80.0°C  (high = +100.0°C, crit = +110.0°C)

corrado@corrado-oneiric:~$