From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from tim.rpsys.net (93-97-173-237.zone5.bethere.co.uk [93.97.173.237]) by yocto-www.yoctoproject.org (Postfix) with ESMTP id A8A4FE00777 for ; Fri, 19 Aug 2011 13:50:01 -0700 (PDT) Received: from localhost (localhost [127.0.0.1]) by tim.rpsys.net (8.13.6/8.13.8) with ESMTP id p7JKntwD000397; Fri, 19 Aug 2011 21:49:55 +0100 Received: from tim.rpsys.net ([127.0.0.1]) by localhost (tim.rpsys.net [127.0.0.1]) (amavisd-new, port 10024) with LMTP id 32371-05; Fri, 19 Aug 2011 21:49:51 +0100 (BST) Received: from [192.168.3.10] ([192.168.3.10]) (authenticated bits=0) by tim.rpsys.net (8.13.6/8.13.8) with ESMTP id p7JKnjhb000391 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO); Fri, 19 Aug 2011 21:49:48 +0100 From: Richard Purdie To: Chris Tapp In-Reply-To: References: <1D7CE6A2-A65C-44F7-89F9-F66374E58B36@keylevel.com> <1313770598.13995.115.camel@rex> Date: Fri, 19 Aug 2011 13:49:41 -0700 Message-ID: <1313786982.13995.126.camel@rex> Mime-Version: 1.0 X-Mailer: Evolution 2.32.2 X-Virus-Scanned: amavisd-new at rpsys.net Cc: yocto@yoctoproject.org Subject: Re: Build fails moving from 4.0.1 to 5.0.1 X-BeenThere: yocto@yoctoproject.org X-Mailman-Version: 2.1.13 Precedence: list List-Id: Discussion of all things Yocto List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 19 Aug 2011 20:50:02 -0000 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 7bit On Fri, 2011-08-19 at 20:43 +0100, Chris Tapp wrote: > On 19 Aug 2011, at 17:16, Richard Purdie wrote: > > > On Fri, 2011-08-19 at 08:29 +0100, Chris Tapp wrote: > >> I've got a configuration that builds ok under 4.0.1, but when I build > >> under 5.0.1 I get the following right at the end: > >> > >> Installing task-poky-boot (1.0-r7) to root... > >> Downloading file:/home/chris/yocto/ebox3300-build/tmp/deploy/ipk/ > >> Vortex86DX/task-poky-boot_1.0-r7_Vortex86DX.ipk. > >> Installing task-sjs (1.0-r0) to root... > >> Downloading file:/home/chris/yocto/ebox3300-build/tmp/deploy/ipk/ > >> Vortex86DX/task-sjs_1.0-r0_Vortex86DX.ipk. > >> Unknown package 'run-postinsts'. > >> Collected errors: > >> * satisfy_dependencies_for: Cannot satisfy the following > >> dependencies for task-poky-boot: > >> * tinylogin * busybox * modutils-initscripts * initscripts * > >> console-tools * initscripts * udev * sysvinit * netbase * base- > >> passwd * > >> * opkg_install_cmd: Cannot install package task-poky-boot. > >> * satisfy_dependencies_for: Cannot satisfy the following > >> dependencies for task-sjs: > >> * yocto-wallboard * psplash * syslinux * > >> * opkg_install_cmd: Cannot install package task-sjs. > >> * opkg_install_cmd: Cannot install package run-postinsts. > >> ERROR: Function 'do_rootfs' failed (see ... > >> > >> If I look in tmp/work, it looks as if the missing dependencies have > >> all been built and packaged within their work areas. > >> > >> I tried cleaning and rebuilding 'task-sjs', but that made no > >> difference to the errors reported against it. > >> > >> Where should I start looking to work out what's going wrong here? Is > >> it as simple as needing to add something like RDEPENDS? > > > > This sounds like the machine specific packages are failing to be found > > so it sounds like a package feed issue. Is sounds like PACKAGE_ARCHS > > isn't listing everything it needs to (such as the machine name) or the > > package system isn't finding a group of packages for some other > > reason. > > Thanks, but that's way over my head at the moment ;-) > > I've searched through the meta data for PACKAGE_ARCHS, but that's not > thrown anything up to make me think there was anything I should look at. > > I'm using my own machine recipe. Is this were I should be looking? Yes, I suspect something about your machine config is resulting in this but its hard to me to say what. You can do things like "bitbake -e | grep ^PACKAGE_ARCHS" to see the contents of variables. I'm curious if your machine name is listed in that list. Cheers, Richard