From: Thomas Pedersen <thomas@cozybit.com>
To: linux-wireless@vger.kernel.org
Cc: Javier Cardona <javier@cozybit.com>,
johannes@sipsolutions.net, linville@tuxdriver.com
Subject: [PATCH 7/9] mac80211: Consolidate {mesh,mpp}_path_flush into one function
Date: Wed, 24 Aug 2011 18:40:50 -0700 [thread overview]
Message-ID: <1314236452-7226-8-git-send-email-thomas@cozybit.com> (raw)
In-Reply-To: <1314236452-7226-1-git-send-email-thomas@cozybit.com>
From: Javier Cardona <javier@cozybit.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
---
net/mac80211/mesh_pathtbl.c | 65 +++++++++++++++++-------------------------
1 files changed, 26 insertions(+), 39 deletions(-)
diff --git a/net/mac80211/mesh_pathtbl.c b/net/mac80211/mesh_pathtbl.c
index e941de2..9d9e1ac 100644
--- a/net/mac80211/mesh_pathtbl.c
+++ b/net/mac80211/mesh_pathtbl.c
@@ -790,35 +790,6 @@ void mesh_plink_broken(struct sta_info *sta)
rcu_read_unlock();
}
-/**
- * mesh_path_flush_by_nexthop - Deletes mesh paths if their next hop matches
- *
- * @sta - mesh peer to match
- *
- * RCU notes: this function is called when a mesh plink transitions from
- * PLINK_ESTAB to any other state, since PLINK_ESTAB state is the only one that
- * allows path creation. This will happen before the sta can be freed (because
- * sta_info_destroy() calls this) so any reader in a rcu read block will be
- * protected against the plink disappearing.
- */
-void mesh_path_flush_by_nexthop(struct sta_info *sta)
-{
- struct mesh_table *tbl;
- struct mesh_path *mpath;
- struct mpath_node *node;
- struct hlist_node *p;
- int i;
-
- rcu_read_lock();
- tbl = rcu_dereference(mesh_paths);
- for_each_mesh_entry(tbl, p, node, i) {
- mpath = node->mpath;
- if (rcu_dereference(mpath->next_hop) == sta)
- mesh_path_del(mpath->dst, mpath->sdata);
- }
- rcu_read_unlock();
-}
-
static void mesh_path_node_reclaim(struct rcu_head *rp)
{
struct mpath_node *node = container_of(rp, struct mpath_node, rcu);
@@ -845,7 +816,18 @@ static void __mesh_path_del(struct mesh_table *tbl, struct mpath_node *node)
atomic_dec(&tbl->entries);
}
-static void mesh_path_flush(struct ieee80211_sub_if_data *sdata)
+/**
+ * mesh_path_flush_by_nexthop - Deletes mesh paths if their next hop matches
+ *
+ * @sta - mesh peer to match
+ *
+ * RCU notes: this function is called when a mesh plink transitions from
+ * PLINK_ESTAB to any other state, since PLINK_ESTAB state is the only one that
+ * allows path creation. This will happen before the sta can be freed (because
+ * sta_info_destroy() calls this) so any reader in a rcu read block will be
+ * protected against the plink disappearing.
+ */
+void mesh_path_flush_by_nexthop(struct sta_info *sta)
{
struct mesh_table *tbl;
struct mesh_path *mpath;
@@ -857,7 +839,7 @@ static void mesh_path_flush(struct ieee80211_sub_if_data *sdata)
tbl = rcu_dereference(mesh_paths);
for_each_mesh_entry(tbl, p, node, i) {
mpath = node->mpath;
- if (mpath->sdata == sdata) {
+ if (rcu_dereference(mpath->next_hop) == sta) {
spin_lock_bh(&tbl->hashwlock[i]);
__mesh_path_del(tbl, node);
spin_unlock_bh(&tbl->hashwlock[i]);
@@ -866,24 +848,23 @@ static void mesh_path_flush(struct ieee80211_sub_if_data *sdata)
rcu_read_unlock();
}
-static void mpp_path_flush(struct ieee80211_sub_if_data *sdata)
+/* Needs to be called with the rcu read lock taken */
+static void table_flush_by_iface(struct mesh_table *tbl,
+ struct ieee80211_sub_if_data *sdata)
{
- struct mesh_table *tbl;
struct mesh_path *mpath;
struct mpath_node *node;
struct hlist_node *p;
int i;
- read_lock_bh(&pathtbl_resize_lock);
- tbl = rcu_dereference_protected(mpp_paths,
- lockdep_is_held(pathtbl_resize_lock));
for_each_mesh_entry(tbl, p, node, i) {
mpath = node->mpath;
+ if (mpath->sdata != sdata)
+ continue;
spin_lock_bh(&tbl->hashwlock[i]);
__mesh_path_del(tbl, node);
spin_unlock_bh(&tbl->hashwlock[i]);
}
- read_unlock_bh(&pathtbl_resize_lock);
}
/**
@@ -896,8 +877,14 @@ static void mpp_path_flush(struct ieee80211_sub_if_data *sdata)
*/
void mesh_path_flush_by_iface(struct ieee80211_sub_if_data *sdata)
{
- mesh_path_flush(sdata);
- mpp_path_flush(sdata);
+ struct mesh_table *tbl;
+
+ rcu_read_lock();
+ tbl = rcu_dereference(mesh_paths);
+ table_flush_by_iface(tbl, sdata);
+ tbl = rcu_dereference(mpp_paths);
+ table_flush_by_iface(tbl, sdata);
+ rcu_read_unlock();
}
/**
--
1.7.4.1
next prev parent reply other threads:[~2011-08-25 1:41 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-25 1:40 [PATCH 0/9] mesh fixes Thomas Pedersen
2011-08-25 1:40 ` [PATCH 1/9] mac80211: Fix RCU pointer dereference in mesh_path_discard_frame() Thomas Pedersen
2011-08-25 2:08 ` Johannes Berg
2011-08-25 18:16 ` Javier Cardona
2011-08-25 18:21 ` Johannes Berg
2011-08-25 18:45 ` Javier Cardona
2011-08-25 18:48 ` Johannes Berg
2011-08-25 19:04 ` Javier Cardona
2011-08-25 1:40 ` [PATCH 2/9] mac80211: Limit amount of HWMP frames and forwarded data packets in queues on mesh interfaces Thomas Pedersen
2011-08-25 5:08 ` Johannes Berg
2011-08-25 17:46 ` Javier Cardona
2011-08-25 1:40 ` [PATCH 3/9] mac80211: Remove mesh paths when an interface is removed Thomas Pedersen
2011-08-25 1:40 ` [PATCH 4/9] mac80211: Improve mpath state locking Thomas Pedersen
2011-08-25 1:40 ` [PATCH 5/9] mac80211: Remove redundant mesh path expiration checks Thomas Pedersen
2011-08-25 1:40 ` [PATCH 6/9] mac80211: Don't iterate twice over all mpaths when once in sufficient Thomas Pedersen
2011-08-25 1:40 ` Thomas Pedersen [this message]
2011-08-25 1:40 ` [PATCH 8/9] mac80211: Don't take the mesh path resize lock when deleting an mpath Thomas Pedersen
2011-08-25 1:40 ` [PATCH 9/9] mac80211: Consolidate mesh path duplicated functions Thomas Pedersen
2011-08-27 0:18 ` [PATCH v2 0/8] mesh fixes Javier Cardona
2011-08-27 0:18 ` [PATCH v2 1/8] mac80211: Fix RCU pointer dereference in mesh_path_discard_frame() Javier Cardona
2011-08-27 0:18 ` [PATCH v2 2/8] mac80211: Remove mesh paths when an interface is removed Javier Cardona
2011-08-27 0:18 ` [PATCH v2 3/8] mac80211: Improve mpath state locking Javier Cardona
2011-08-27 0:18 ` [PATCH v2 4/8] mac80211: Remove redundant mesh path expiration checks Javier Cardona
2011-08-27 0:18 ` [PATCH v2 5/8] mac80211: Don't iterate twice over all mpaths when once in sufficient Javier Cardona
2011-08-27 0:18 ` [PATCH v2 6/8] mac80211: Consolidate {mesh,mpp}_path_flush into one function Javier Cardona
2011-08-29 13:49 ` Johannes Berg
2011-08-29 18:36 ` Javier Cardona
2011-08-29 18:38 ` Johannes Berg
2011-08-27 0:18 ` [PATCH v2 7/8] mac80211: Don't take the mesh path resize lock when deleting an mpath Javier Cardona
2011-08-29 13:49 ` Johannes Berg
2011-08-27 0:18 ` [PATCH v2 8/8] mac80211: Consolidate mesh path duplicated functions Javier Cardona
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1314236452-7226-8-git-send-email-thomas@cozybit.com \
--to=thomas@cozybit.com \
--cc=javier@cozybit.com \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.