All of lore.kernel.org
 help / color / mirror / Atom feed
From: Emeltchenko Andrei <Andrei.Emeltchenko.news@gmail.com>
To: linux-bluetooth@vger.kernel.org
Subject: [RFCv2 5/7] Bluetooth: parse EFS in l2cap config response
Date: Thu,  1 Sep 2011 14:07:34 +0300	[thread overview]
Message-ID: <1314875256-6904-6-git-send-email-Andrei.Emeltchenko.news@gmail.com> (raw)
In-Reply-To: <1314875256-6904-1-git-send-email-Andrei.Emeltchenko.news@gmail.com>

From: Andrei Emeltchenko <andrei.emeltchenko@intel.com>

Add parsing extended flowspec in l2cap config response
Based upon haijun.liu <haijun.liu@atheros.com> series of patches
(sent Sun, 22 Aug 2010)

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
---
 net/bluetooth/l2cap_core.c |   29 ++++++++++++++++++++++++++++-
 1 files changed, 28 insertions(+), 1 deletions(-)

diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index b7f36da..02908f0 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -2213,6 +2213,7 @@ static int l2cap_parse_conf_rsp(struct l2cap_chan *chan, void *rsp, int len, voi
 	int type, olen;
 	unsigned long val;
 	struct l2cap_conf_rfc rfc;
+	struct l2cap_conf_efs efs;
 
 	BT_DBG("chan %p, rsp %p, len %d, req %p", chan, rsp, len, data);
 
@@ -2248,6 +2249,19 @@ static int l2cap_parse_conf_rsp(struct l2cap_chan *chan, void *rsp, int len, voi
 			l2cap_add_conf_opt(&ptr, L2CAP_CONF_RFC,
 					sizeof(rfc), (unsigned long) &rfc);
 			break;
+
+		case L2CAP_CONF_EFS:
+			if (olen == sizeof(efs))
+				memcpy(&efs, (void *)val, olen);
+
+			if (chan->local_stype != L2CAP_SERV_NOTRAFIC &&
+				efs.service_type != L2CAP_SERV_NOTRAFIC &&
+				efs.service_type != chan->local_stype)
+				return -ECONNREFUSED;
+
+			l2cap_add_conf_opt(&ptr, L2CAP_CONF_EFS,
+					sizeof(efs), (unsigned long) &efs);
+			break;
 		}
 	}
 
@@ -2256,13 +2270,26 @@ static int l2cap_parse_conf_rsp(struct l2cap_chan *chan, void *rsp, int len, voi
 
 	chan->mode = rfc.mode;
 
-	if (*result == L2CAP_CONF_SUCCESS) {
+	if (*result == L2CAP_CONF_SUCCESS || *result == L2CAP_CONF_PENDING) {
 		switch (rfc.mode) {
 		case L2CAP_MODE_ERTM:
 			chan->retrans_timeout = le16_to_cpu(rfc.retrans_timeout);
 			chan->monitor_timeout = le16_to_cpu(rfc.monitor_timeout);
 			chan->mps    = le16_to_cpu(rfc.max_pdu_size);
+
+			if (test_bit(FLAG_EFS_ENABLE, &chan->flags)) {
+				/* id, service type should not be changed */
+				chan->local_msdu =
+					le16_to_cpu(efs.max_sdu_size);
+				chan->local_sdu_itime =
+					le32_to_cpu(efs.sdu_inter_time);
+				chan->local_acc_lat =
+					le32_to_cpu(efs.access_latency);
+				chan->local_flush_to =
+					le32_to_cpu(efs.flush_timeout);
+			}
 			break;
+
 		case L2CAP_MODE_STREAMING:
 			chan->mps    = le16_to_cpu(rfc.max_pdu_size);
 		}
-- 
1.7.4.1


  parent reply	other threads:[~2011-09-01 11:07 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-09-01 11:07 [RFCv2 0/7] EFS: extended flow specification option support Emeltchenko Andrei
2011-09-01 11:07 ` [RFCv2 1/7] Bluetooth: L2CAP extended feature mask update Emeltchenko Andrei
2011-09-01 11:07 ` [RFCv2 2/7] Bluetooth: EFS: definitions and headers for EFS Emeltchenko Andrei
2011-09-01 11:07 ` [RFCv2 3/7] Bluetooth: EFS: add disable_flowspec kernel param Emeltchenko Andrei
2011-09-13 20:17   ` Gustavo Padovan
2011-09-14  5:30     ` Marcel Holtmann
2011-09-14  8:30       ` Emeltchenko Andrei
2011-09-14 13:38         ` Gustavo Padovan
2011-09-01 11:07 ` [RFCv2 4/7] Bluetooth: parse EFS in l2cap config request Emeltchenko Andrei
2011-09-13 20:32   ` Gustavo Padovan
2011-09-01 11:07 ` Emeltchenko Andrei [this message]
2011-09-01 11:07 ` [RFCv2 6/7] Bluetooth: add EFS option in l2cap conf req Emeltchenko Andrei
2011-09-01 12:45   ` Szymon Janc
2011-09-02  7:25     ` Emeltchenko Andrei
2011-09-01 11:07 ` [RFCv2 7/7] Bluetooth: EFS: parse l2cap config rsp pending Emeltchenko Andrei

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1314875256-6904-6-git-send-email-Andrei.Emeltchenko.news@gmail.com \
    --to=andrei.emeltchenko.news@gmail.com \
    --cc=linux-bluetooth@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.