From: Avi Kivity <avi@redhat.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 00/28] Memory API conversion, batch 7
Date: Mon, 12 Sep 2011 13:50:38 +0300 [thread overview]
Message-ID: <1315824666-4214-1-git-send-email-avi@redhat.com> (raw)
git://github.com/avikivity/qemu.git memory/batch
More of the same. I tested what I could using the images on the qemu wiki -
note not all images boot even on upstream.
Avi Kivity (9):
mips_jazz: convert to memory API
mips_malta: convert to memory API
mips_mipssim: convert to memory API
mips_r4k: convert to memory API
musicpal: convert to memory API
omap1: convert to memory API (part I)
omap1: convert to memory API (part II)
mips_malta: move i8259 initialization after piix4 initialization
pci: simplify memory region registration
Edgar E. Iglesias (5):
etrax-pic: Convert to MemoryRegion
etrax-ser: Convert to MemoryRegion
etrax-timer: Convert to MemoryRegion
etrax-dma: Convert to MemoryRegion
etrax-eth: Convert to MemoryRegion
Richard Henderson (14):
pci: add pci_address_space_io()
isa: Pass i/o address space to isa_bus_new
isa: add isa_register_ioport()
pc: Re-order pc_init1 to initialize the ISA bus before ISA devices
cs4231a: Convert to MemoryRegion
i8254: Convert to MemoryRegion
i8259: Convert to MemoryRegion
pckbd: Convert to MemoryRegion
serial: Convert serial_isa_initfn to MemoryRegion
fdc: Convert isabus_fdc_init1 to MemoryRegion
serial: Convert serial_mm_init to MemoryRegion
serial: Use enum device_endian in serial_mm_init parameter
serial: Remove ioregister parameter from serial_mm_init
serial: Add MemoryRegion parameter to serial_mm_init
hw/cs4231a.c | 38 ++--
hw/etraxfs_dma.c | 43 +++--
hw/etraxfs_eth.c | 30 ++--
hw/etraxfs_pic.c | 30 ++--
hw/etraxfs_ser.c | 33 ++--
hw/etraxfs_timer.c | 31 ++--
hw/fdc.c | 53 +++--
hw/i8254.c | 16 ++-
hw/i8259.c | 65 ++++--
hw/isa-bus.c | 14 ++-
hw/isa.h | 7 +-
hw/mips_jazz.c | 119 +++++-----
hw/mips_malta.c | 69 +++---
hw/mips_mipssim.c | 15 +-
hw/mips_r4k.c | 41 ++---
hw/musicpal.c | 261 +++++++++--------------
hw/omap.h | 18 ++-
hw/omap1.c | 533 +++++++++++++++++++++++++---------------------
hw/omap_sx1.c | 4 +-
hw/omap_uart.c | 27 +--
hw/palm.c | 4 +-
hw/pc.h | 10 +-
hw/pc_piix.c | 24 ++-
hw/pci.c | 18 +-
hw/pci.h | 1 +
hw/pckbd.c | 59 +++--
hw/petalogix_ml605_mmu.c | 6 +-
hw/piix4.c | 2 +-
hw/piix_pci.c | 2 +-
hw/ppc405_uc.c | 20 +-
hw/ppc440.c | 11 +-
hw/ppc_prep.c | 2 +-
hw/ppce500_mpc8544ds.c | 10 +-
hw/pxa2xx.c | 38 ++--
hw/serial.c | 162 ++++-----------
hw/sm501.c | 12 +-
hw/sun4u.c | 7 +-
hw/virtex_ml507.c | 5 +-
hw/vt82c686.c | 2 +-
39 files changed, 927 insertions(+), 915 deletions(-)
--
1.7.6.1
next reply other threads:[~2011-09-12 10:51 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-09-12 10:50 Avi Kivity [this message]
2011-09-12 10:50 ` [Qemu-devel] [PULL 01/28] mips_jazz: convert to memory API Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 02/28] mips_malta: " Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 03/28] mips_mipssim: " Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 04/28] mips_r4k: " Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 05/28] musicpal: " Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 06/28] omap1: convert to memory API (part I) Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 07/28] omap1: convert to memory API (part II) Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 08/28] pci: add pci_address_space_io() Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 09/28] isa: Pass i/o address space to isa_bus_new Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 10/28] isa: add isa_register_ioport() Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 11/28] pc: Re-order pc_init1 to initialize the ISA bus before ISA devices Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 12/28] cs4231a: Convert to MemoryRegion Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 13/28] i8254: " Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 14/28] mips_malta: move i8259 initialization after piix4 initialization Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 15/28] i8259: Convert to MemoryRegion Avi Kivity
2011-09-12 12:54 ` Jan Kiszka
2011-09-12 13:30 ` Jan Kiszka
2011-09-12 10:50 ` [Qemu-devel] [PULL 16/28] pckbd: " Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 17/28] serial: Convert serial_isa_initfn " Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 18/28] fdc: Convert isabus_fdc_init1 " Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 19/28] pci: simplify memory region registration Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 20/28] etrax-pic: Convert to MemoryRegion Avi Kivity
2011-09-12 10:50 ` [Qemu-devel] [PULL 21/28] etrax-ser: " Avi Kivity
2011-09-12 10:51 ` [Qemu-devel] [PULL 22/28] etrax-timer: " Avi Kivity
2011-09-12 10:51 ` [Qemu-devel] [PULL 23/28] etrax-dma: " Avi Kivity
2011-09-12 10:51 ` [Qemu-devel] [PULL 24/28] etrax-eth: " Avi Kivity
2011-09-12 10:51 ` [Qemu-devel] [PULL 25/28] serial: Convert serial_mm_init " Avi Kivity
2011-09-12 10:51 ` [Qemu-devel] [PULL 26/28] serial: Use enum device_endian in serial_mm_init parameter Avi Kivity
2011-09-12 10:51 ` [Qemu-devel] [PULL 27/28] serial: Remove ioregister parameter from serial_mm_init Avi Kivity
2011-09-12 10:51 ` [Qemu-devel] [PULL 28/28] serial: Add MemoryRegion parameter to serial_mm_init Avi Kivity
2011-09-12 12:29 ` [Qemu-devel] [PULL 00/28] Memory API conversion, batch 7 Avi Kivity
2011-09-12 12:57 ` Anthony Liguori
2011-09-12 13:04 ` Avi Kivity
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1315824666-4214-1-git-send-email-avi@redhat.com \
--to=avi@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.