From mboxrd@z Thu Jan 1 00:00:00 1970 From: Philippe Gerum In-Reply-To: <13263236d9e.sdiani@domain.hid> References: <13263236d9e.sdiani@domain.hid> Content-Type: text/plain; charset="UTF-8" Date: Tue, 13 Sep 2011 16:22:24 +0200 Message-ID: <1315923744.2096.17.camel@domain.hid> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Subject: Re: [Adeos-main] R: Re: Adeos for PowerPc 2.6.29.4-64 bit List-Id: General discussion about Adeos List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: "sdiani@domain.hid" Cc: adeos-main@gna.org On Tue, 2011-09-13 at 16:14 +0200, sdiani@domain.hid wrote: > I mean, the patch applied is for the 32-bit. No. Adeos -powerpc patches support both 32 and 64bit platforms. Check the contents. > The kernel is compiled 64-bit. > How can I do to have or create the > "adeos-ipipe-2.6.29.4-powerpc64.patch" ? > If is possible. > > Thanks > > ----Messaggio originale---- > Da: rpm@xenomai.org > Data: 13-set-2011 9.15 > A: "sdiani@domain.hid" > Cc: > Ogg: Re: Adeos for PowerPc 2.6.29.4-64 bit > > On Tue, 2011-09-13 at 00:54 +0200, sdiani@domain.hid wrote: > > Hi, > > > > Is it possible to have an adeos 64-bit patch for the > > 2.6.29.4-64-bit kernel, running on a G5 (PowerPc64)? > > if not, how can I built one ? > > The latest that I found is > > "adeos-ipipe-2.6.22-rc5-powerpc64-1.4-00.patch". > > I don't understand what you mean. The thread you are replying > to shows > that you already found a working ppc64 patch for 2.6.29.4. If > it does > not eventually, then you will have to fix it. I don't think > anyone is > maintaining the pipeline for this old release. > > > > > Thanks > > Sergio > > ----Messaggio originale---- > > Da: sdiani@domain.hid > > Data: 10-mag-2011 14.11 > > A: > > Cc: > > Ogg: R: [Adeos-main] R: Re: Adeos for PowerPc > 2.6.29.4-64 bit > > > > It seems working, it worked for 1 hour without > freezing > > Now i want to stress the kernel a bit. > > > > Thanks a lot > > > > Sergio > > ----Messaggio originale---- > > Da: sdiani@domain.hid > > Data: 9-mag-2011 17.16 > > A: > > Cc: > > Ogg: [Adeos-main] R: Re: Adeos for PowerPc > 2.6.29.4-64 > > bit > > > > Tonight I try it and I will tell You > > > > Thanks > > > > Sergio > > ----Messaggio originale---- > > Da: rpm@xenomai.org > > Data: 4-mag-2011 16.44 > > A: > "sdiani@domain.hid" > > Cc: > > Ogg: Re: [Adeos-main] Adeos for > PowerPc > > 2.6.29.4-64 bit > > > > On Wed, 2011-05-04 at 14:57 +0200, > > sdiani@domain.hid wrote: > > > > > > Hi everyone, > > > i'm trying to compile the 2.6.29.4 > 64-bit > > Denx kernel for PowerPC > > > ( PPC 970 , G5 Desktop ). > > > I have applied the > > > patch > > > adeos-ipipe-2.6.29.4-powerpc-DENX-2.7-04.patch > > and after > > > reboot i get this error: > > > > > > NIP > > [000001C968] .power4_idle+0x54/0x58 > > > LR = > (null) > > > .... > > > > Exceptionn: 901 at > > power4_idle+0x54/0x58 > > > > LR > > = .cpu_idle +0x11c/0x1d4 > > > > > > It regards the idle_power4.S file > and the > > only changes in it, are > > > about the CONFIG_SOFTDISABLE. > > > Can Anyone help me to solve it ? > > > > The power save code for powermac > won't work as > > is with Adeos. Try > > booting with powersave=off. > > > > > > > > Thank you in advance > > > > > > Sergio > > > > > > _______________________________________________ > > > Adeos-main mailing list > > > Adeos-main@domain.hid > > > > https://mail.gna.org/listinfo/adeos-main > > > > -- > > Philippe. > > > > > > > > > > > > > > > > > > -- > Philippe. > > > > -- Philippe.