[PATCH 2/3] ath9k: make beacon timer initialization more reliable

[Felix Fietkau <nbd@openwrt.org>]

When starting the AP beacon timer, it assumes that the TSF has recently
been cleared. Set the SC_OP_TSF_RESET flag to ensure that this is always
the case.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
---
 drivers/net/wireless/ath/ath9k/beacon.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c
index 22e8e25..6d7088b 100644
--- a/drivers/net/wireless/ath/ath9k/beacon.c
+++ b/drivers/net/wireless/ath/ath9k/beacon.c
@@ -517,6 +517,7 @@ static void ath_beacon_config_ap(struct ath_softc *sc,
 	/* Set the computed AP beacon timers */
 
 	ath9k_hw_disable_interrupts(ah);
+	sc->sc_flags |= SC_OP_TSF_RESET;
 	ath9k_beacon_init(sc, nexttbtt, intval);
 	sc->beacon.bmisscnt = 0;
 	ath9k_hw_set_interrupts(ah, ah->imask);
-- 
1.7.3.2