[U-Boot] [PATCH 1/2] EfikaMX: Add imximage config for Efika SB

All of lore.kernel.org
 help / color / mirror / Atom feed

From: Marek Vasut <marek.vasut@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 1/2] EfikaMX: Add imximage config for Efika SB
Date: Mon, 19 Sep 2011 12:42:20 +0200	[thread overview]
Message-ID: <1316428941-8957-2-git-send-email-marek.vasut@gmail.com> (raw)
In-Reply-To: <1316428941-8957-1-git-send-email-marek.vasut@gmail.com>

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
---
 board/efikamx/imximage.cfg    |  122 -----------------------------------------
 board/efikamx/imximage_mx.cfg |  122 +++++++++++++++++++++++++++++++++++++++++
 board/efikamx/imximage_sb.cfg |  122 +++++++++++++++++++++++++++++++++++++++++
 boards.cfg                    |    3 +-
 4 files changed, 246 insertions(+), 123 deletions(-)
 delete mode 100644 board/efikamx/imximage.cfg
 create mode 100644 board/efikamx/imximage_mx.cfg
 create mode 100644 board/efikamx/imximage_sb.cfg

diff --git a/board/efikamx/imximage.cfg b/board/efikamx/imximage.cfg
deleted file mode 100644
index 6fe0ff9..0000000
--- a/board/efikamx/imximage.cfg
+++ /dev/null
@@ -1,122 +0,0 @@
-#
-# Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
-#
-# BASED ON: imx51evk
-#
-# (C) Copyright 2009
-# Stefano Babic DENX Software Engineering sbabic at denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not write to the Free Software
-# Foundation Inc. 51 Franklin Street Fifth Floor Boston,
-# MA 02110-1301 USA
-#
-# Refer docs/README.imxmage for more details about how-to configure
-# and create imximage boot image
-#
-# The syntax is taken as close as possible with the kwbimage
-
-# Boot Device : one of
-# spi, sd (the board has no nand neither onenand)
-BOOT_FROM	spi
-
-# Device Configuration Data (DCD)
-#
-# Each entry must have the format:
-# Addr-type           Address        Value
-#
-# where:
-#	Addr-type register length (1,2 or 4 bytes)
-#	Address	  absolute address of the register
-#	value	  value to be stored in the register
-
-# Setting IOMUXC
-DATA 4 0x73fa88a0 0x000
-DATA 4 0x73fa850c 0x20c5
-DATA 4 0x73fa8510 0x20c5
-DATA 4 0x73fa883c 0x5
-DATA 4 0x73fa8848 0x5
-DATA 4 0x73fa84b8 0xe7
-DATA 4 0x73fa84bc 0x45
-DATA 4 0x73fa84c0 0x45
-DATA 4 0x73fa84c4 0x45
-DATA 4 0x73fa84c8 0x45
-DATA 4 0x73fa8820 0x0
-DATA 4 0x73fa84a4 0x5
-DATA 4 0x73fa84a8 0x5
-DATA 4 0x73fa84ac 0xe5
-DATA 4 0x73fa84b0 0xe5
-DATA 4 0x73fa84b4 0xe5
-DATA 4 0x73fa84cc 0xe5
-DATA 4 0x73fa84d0 0xe4
-
-DATA 4 0x73fa882c 0x4
-DATA 4 0x73fa88a4 0x4
-DATA 4 0x73fa88ac 0x4
-DATA 4 0x73fa88b8 0x4
-
-# Setting DDR for micron
-# 13 Rows, 10 Cols, 32 bit, SREF=4 Micron Model
-# CAS=3 BL=4
-# ESDCTL_ESDCTL0
-DATA 4 0x83fd9000 0x82a20000
-# ESDCTL_ESDCTL1
-DATA 4 0x83fd9008 0x82a20000
-# ESDCTL_ESDMISC
-DATA 4 0x83fd9010 0xcaaaf6d0
-# ESDCTL_ESDCFG0
-DATA 4 0x83fd9004 0x3f3574aa
-# ESDCTL_ESDCFG1
-DATA 4 0x83fd900c 0x3f3574aa
-
-# Init DRAM on CS0
-# ESDCTL_ESDSCR
-DATA 4 0x83fd9014 0x04008008
-DATA 4 0x83fd9014 0x0000801a
-DATA 4 0x83fd9014 0x0000801b
-DATA 4 0x83fd9014 0x00448019
-DATA 4 0x83fd9014 0x07328018
-DATA 4 0x83fd9014 0x04008008
-DATA 4 0x83fd9014 0x00008010
-DATA 4 0x83fd9014 0x00008010
-DATA 4 0x83fd9014 0x06328018
-DATA 4 0x83fd9014 0x03808019
-DATA 4 0x83fd9014 0x00408019
-DATA 4 0x83fd9014 0x00008000
-
-# Init DRAM on CS1
-DATA 4 0x83fd9014 0x0400800c
-DATA 4 0x83fd9014 0x0000801e
-DATA 4 0x83fd9014 0x0000801f
-DATA 4 0x83fd9014 0x0000801d
-DATA 4 0x83fd9014 0x0732801c
-DATA 4 0x83fd9014 0x0400800c
-DATA 4 0x83fd9014 0x00008014
-DATA 4 0x83fd9014 0x00008014
-DATA 4 0x83fd9014 0x0632801c
-DATA 4 0x83fd9014 0x0380801d
-DATA 4 0x83fd9014 0x0040801d
-DATA 4 0x83fd9014 0x00008004
-
-# Write to CTL0
-DATA 4 0x83fd9000 0xb2a20000
-# Write to CTL1
-DATA 4 0x83fd9008 0xb2a20000
-# ESDMISC
-DATA 4 0x83fd9010 0x000ad6d0
-#ESDCTL_ESDCDLYGD
-DATA 4 0x83fd9034 0x90000000
-DATA 4 0x83fd9014 0x00000000
diff --git a/board/efikamx/imximage_mx.cfg b/board/efikamx/imximage_mx.cfg
new file mode 100644
index 0000000..6fe0ff9
--- /dev/null
+++ b/board/efikamx/imximage_mx.cfg
@@ -0,0 +1,122 @@
+#
+# Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
+#
+# BASED ON: imx51evk
+#
+# (C) Copyright 2009
+# Stefano Babic DENX Software Engineering sbabic at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not write to the Free Software
+# Foundation Inc. 51 Franklin Street Fifth Floor Boston,
+# MA 02110-1301 USA
+#
+# Refer docs/README.imxmage for more details about how-to configure
+# and create imximage boot image
+#
+# The syntax is taken as close as possible with the kwbimage
+
+# Boot Device : one of
+# spi, sd (the board has no nand neither onenand)
+BOOT_FROM	spi
+
+# Device Configuration Data (DCD)
+#
+# Each entry must have the format:
+# Addr-type           Address        Value
+#
+# where:
+#	Addr-type register length (1,2 or 4 bytes)
+#	Address	  absolute address of the register
+#	value	  value to be stored in the register
+
+# Setting IOMUXC
+DATA 4 0x73fa88a0 0x000
+DATA 4 0x73fa850c 0x20c5
+DATA 4 0x73fa8510 0x20c5
+DATA 4 0x73fa883c 0x5
+DATA 4 0x73fa8848 0x5
+DATA 4 0x73fa84b8 0xe7
+DATA 4 0x73fa84bc 0x45
+DATA 4 0x73fa84c0 0x45
+DATA 4 0x73fa84c4 0x45
+DATA 4 0x73fa84c8 0x45
+DATA 4 0x73fa8820 0x0
+DATA 4 0x73fa84a4 0x5
+DATA 4 0x73fa84a8 0x5
+DATA 4 0x73fa84ac 0xe5
+DATA 4 0x73fa84b0 0xe5
+DATA 4 0x73fa84b4 0xe5
+DATA 4 0x73fa84cc 0xe5
+DATA 4 0x73fa84d0 0xe4
+
+DATA 4 0x73fa882c 0x4
+DATA 4 0x73fa88a4 0x4
+DATA 4 0x73fa88ac 0x4
+DATA 4 0x73fa88b8 0x4
+
+# Setting DDR for micron
+# 13 Rows, 10 Cols, 32 bit, SREF=4 Micron Model
+# CAS=3 BL=4
+# ESDCTL_ESDCTL0
+DATA 4 0x83fd9000 0x82a20000
+# ESDCTL_ESDCTL1
+DATA 4 0x83fd9008 0x82a20000
+# ESDCTL_ESDMISC
+DATA 4 0x83fd9010 0xcaaaf6d0
+# ESDCTL_ESDCFG0
+DATA 4 0x83fd9004 0x3f3574aa
+# ESDCTL_ESDCFG1
+DATA 4 0x83fd900c 0x3f3574aa
+
+# Init DRAM on CS0
+# ESDCTL_ESDSCR
+DATA 4 0x83fd9014 0x04008008
+DATA 4 0x83fd9014 0x0000801a
+DATA 4 0x83fd9014 0x0000801b
+DATA 4 0x83fd9014 0x00448019
+DATA 4 0x83fd9014 0x07328018
+DATA 4 0x83fd9014 0x04008008
+DATA 4 0x83fd9014 0x00008010
+DATA 4 0x83fd9014 0x00008010
+DATA 4 0x83fd9014 0x06328018
+DATA 4 0x83fd9014 0x03808019
+DATA 4 0x83fd9014 0x00408019
+DATA 4 0x83fd9014 0x00008000
+
+# Init DRAM on CS1
+DATA 4 0x83fd9014 0x0400800c
+DATA 4 0x83fd9014 0x0000801e
+DATA 4 0x83fd9014 0x0000801f
+DATA 4 0x83fd9014 0x0000801d
+DATA 4 0x83fd9014 0x0732801c
+DATA 4 0x83fd9014 0x0400800c
+DATA 4 0x83fd9014 0x00008014
+DATA 4 0x83fd9014 0x00008014
+DATA 4 0x83fd9014 0x0632801c
+DATA 4 0x83fd9014 0x0380801d
+DATA 4 0x83fd9014 0x0040801d
+DATA 4 0x83fd9014 0x00008004
+
+# Write to CTL0
+DATA 4 0x83fd9000 0xb2a20000
+# Write to CTL1
+DATA 4 0x83fd9008 0xb2a20000
+# ESDMISC
+DATA 4 0x83fd9010 0x000ad6d0
+#ESDCTL_ESDCDLYGD
+DATA 4 0x83fd9034 0x90000000
+DATA 4 0x83fd9014 0x00000000
diff --git a/board/efikamx/imximage_sb.cfg b/board/efikamx/imximage_sb.cfg
new file mode 100644
index 0000000..878146f
--- /dev/null
+++ b/board/efikamx/imximage_sb.cfg
@@ -0,0 +1,122 @@
+#
+# Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
+#
+# BASED ON: imx51evk
+#
+# (C) Copyright 2009
+# Stefano Babic DENX Software Engineering sbabic at denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not write to the Free Software
+# Foundation Inc. 51 Franklin Street Fifth Floor Boston,
+# MA 02110-1301 USA
+#
+# Refer docs/README.imxmage for more details about how-to configure
+# and create imximage boot image
+#
+# The syntax is taken as close as possible with the kwbimage
+
+# Boot Device : one of
+# spi, sd (the board has no nand neither onenand)
+BOOT_FROM	spi
+
+# Device Configuration Data (DCD)
+#
+# Each entry must have the format:
+# Addr-type           Address        Value
+#
+# where:
+#	Addr-type register length (1,2 or 4 bytes)
+#	Address	  absolute address of the register
+#	value	  value to be stored in the register
+
+# Setting IOMUXC
+DATA 4 0x73fa88a0 0x200
+DATA 4 0x73fa850c 0x20c3
+DATA 4 0x73fa8510 0x20c3
+DATA 4 0x73fa883c 0x2
+DATA 4 0x73fa8848 0x2
+DATA 4 0x73fa84b8 0xe7
+DATA 4 0x73fa84bc 0x45
+DATA 4 0x73fa84c0 0x45
+DATA 4 0x73fa84c4 0x45
+DATA 4 0x73fa84c8 0x45
+DATA 4 0x73fa8820 0x0
+DATA 4 0x73fa84a4 0x5
+DATA 4 0x73fa84a8 0x5
+DATA 4 0x73fa84ac 0xe3
+DATA 4 0x73fa84b0 0xe3
+DATA 4 0x73fa84b4 0xe3
+DATA 4 0x73fa84cc 0xe3
+DATA 4 0x73fa84d0 0xe2
+
+DATA 4 0x73fa882c 0x4
+DATA 4 0x73fa88a4 0x4
+DATA 4 0x73fa88ac 0x4
+DATA 4 0x73fa88b8 0x4
+
+# Setting DDR for micron
+# 13 Rows, 10 Cols, 32 bit, SREF=4 Micron Model
+# CAS=3 BL=4
+# ESDCTL_ESDCTL0
+DATA 4 0x83fd9000 0x82a20000
+# ESDCTL_ESDCTL1
+DATA 4 0x83fd9008 0x82a20000
+# ESDCTL_ESDMISC
+DATA 4 0x83fd9010 0xcaaaf6d0
+# ESDCTL_ESDCFG0
+DATA 4 0x83fd9004 0x333574aa
+# ESDCTL_ESDCFG1
+DATA 4 0x83fd900c 0x333574aa
+
+# Init DRAM on CS0
+# ESDCTL_ESDSCR
+DATA 4 0x83fd9014 0x04008008
+DATA 4 0x83fd9014 0x0000801a
+DATA 4 0x83fd9014 0x0000801b
+DATA 4 0x83fd9014 0x00448019
+DATA 4 0x83fd9014 0x07328018
+DATA 4 0x83fd9014 0x04008008
+DATA 4 0x83fd9014 0x00008010
+DATA 4 0x83fd9014 0x00008010
+DATA 4 0x83fd9014 0x06328018
+DATA 4 0x83fd9014 0x03808019
+DATA 4 0x83fd9014 0x00408019
+DATA 4 0x83fd9014 0x00008000
+
+# Init DRAM on CS1
+DATA 4 0x83fd9014 0x0400800c
+DATA 4 0x83fd9014 0x0000801e
+DATA 4 0x83fd9014 0x0000801f
+DATA 4 0x83fd9014 0x0000801d
+DATA 4 0x83fd9014 0x0732801c
+DATA 4 0x83fd9014 0x0400800c
+DATA 4 0x83fd9014 0x00008014
+DATA 4 0x83fd9014 0x00008014
+DATA 4 0x83fd9014 0x0632801c
+DATA 4 0x83fd9014 0x0380801d
+DATA 4 0x83fd9014 0x0040801d
+DATA 4 0x83fd9014 0x00008004
+
+# Write to CTL0
+DATA 4 0x83fd9000 0xb2a20000
+# Write to CTL1
+DATA 4 0x83fd9008 0xb2a20000
+# ESDMISC
+DATA 4 0x83fd9010 0xcaaaf6d0
+#ESDCTL_ESDCDLYGD
+DATA 4 0x83fd9034 0x90000000
+DATA 4 0x83fd9014 0x00000000
diff --git a/boards.cfg b/boards.cfg
index 8a5bfc1..bf9e0f7 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -155,7 +155,8 @@ dkb			     arm         arm926ejs   -                   Marvell        pantheon
 integratorap_cm946es         arm         arm946es    integrator          armltd         -               integratorap
 integratorcp_cm946es         arm         arm946es    integrator          armltd         -               integratorcp
 ca9x4_ct_vxp                 arm         armv7       vexpress            armltd
-efikamx                      arm         armv7       efikamx             -              mx5		efikamx:IMX_CONFIG=board/efikamx/imximage.cfg
+efikamx                      arm         armv7       efikamx             -              mx5		efikamx:MACH_EFIKAMX,IMX_CONFIG=board/efikamx/imximage_mx.cfg
+efikasb                      arm         armv7       efikamx             -              mx5		efikamx:MACH_EFIKASB,IMX_CONFIG=board/efikamx/imximage_sb.cfg
 mx51evk                      arm         armv7       mx51evk             freescale      mx5		mx51evk:IMX_CONFIG=board/freescale/mx51evk/imximage.cfg
 mx53ard                      arm         armv7       mx53ard             freescale      mx5		mx53ard:IMX_CONFIG=board/freescale/mx53ard/imximage_dd3.cfg
 mx53evk                      arm         armv7       mx53evk             freescale      mx5		mx53evk:IMX_CONFIG=board/freescale/mx53evk/imximage.cfg
-- 
1.7.5.4

next prev parent reply	other threads:[~2011-09-19 10:42 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-09-19 10:42 [U-Boot] [PATCH 0/2] Add EfikaSB support Marek Vasut
2011-09-19 10:42 ` Marek Vasut [this message]
2011-09-19 13:19   ` [U-Boot] [PATCH 1/2] EfikaMX: Add imximage config for Efika SB Stefano Babic
2011-09-19 18:57   ` [U-Boot] [PATCH 1/2 V2] " Marek Vasut
2011-09-25 19:52   ` Marek Vasut
2011-09-26 10:53     ` Stefano Babic
2011-09-19 10:42 ` [U-Boot] [PATCH 2/2] EfikaSB: Add preliminary EfikaSB support Marek Vasut
2011-09-22  9:44   ` Stefano Babic
2011-09-22 12:29     ` Marek Vasut
2011-09-22 14:00       ` Stefano Babic
2011-09-22 15:52         ` Marek Vasut
2011-09-25 19:55   ` [U-Boot] [PATCH 2/2 V2] " Marek Vasut
2011-09-26 10:53     ` Stefano Babic

find likely ancestor, descendant, or conflicting patches for this message:
( dfblob:6fe0ff9 dfblob:6fe0ff9 dfblob:878146f dfblob:8a5bfc1
dfblob:bf9e0f7 )
 OR (
bs:"[U-Boot] [PATCH 1/2] EfikaMX: Add imximage config for Efika SB" )
	(help)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1316428941-8957-2-git-send-email-marek.vasut@gmail.com \
    --to=marek.vasut@gmail.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Be sure your reply has a Subject: header at the top and a blank line before the message body.

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.