All of lore.kernel.org
 help / color / mirror / Atom feed
From: jason77.wang@gmail.com (Hui Wang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] mx5: modify pm and idle
Date: Fri, 30 Sep 2011 14:37:22 +0800	[thread overview]
Message-ID: <1317364642-22956-1-git-send-email-jason77.wang@gmail.com> (raw)

Two problems exist in the current i.MX5 pm suspend/resume and idle
functions. The first is the current i.MX5 suspend routine will call
tzic_enable_wake(1) to set wake source, this will set all enabled
irq as wake source rather than those wake capable. The second
is i.MX5 idle will call mx5_cpu_lp_set() to prepare enter low power
mode, but it forgets to call wfi instruction to enter this mode.

To fix these two problems, using generic irq chip pm interface and
adding a new function mx5_arch_idle().

Signed-off-by: Hui Wang <jason77.wang@gmail.com>
---

This patch is basing on the latest imx-features branch.

This patch is validated on the i.MX51 PDK board (CPU revision 2.0).

Since both pm suspend/resume and idle has close relation with
mx5_cpu_lp_set() and tzic_enable_wake(), i choose to use one patch
instead of independent two to address existing problems.

 arch/arm/mach-mx5/system.c              |   24 +++++++++++++++--
 arch/arm/plat-mxc/include/mach/mxc.h    |    2 +-
 arch/arm/plat-mxc/include/mach/system.h |    3 +-
 arch/arm/plat-mxc/tzic.c                |   42 ++++++++++++++++++++++---------
 4 files changed, 54 insertions(+), 17 deletions(-)

diff --git a/arch/arm/mach-mx5/system.c b/arch/arm/mach-mx5/system.c
index 76ae8dc..92bf341 100644
--- a/arch/arm/mach-mx5/system.c
+++ b/arch/arm/mach-mx5/system.c
@@ -10,11 +10,17 @@
  * http://www.opensource.org/licenses/gpl-license.html
  * http://www.gnu.org/copyleft/gpl.html
  */
+#include <linux/suspend.h>
+#include <linux/clk.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <mach/hardware.h>
+#include <mach/common.h>
+
 #include "crm_regs.h"
 
+static struct clk *gpc_dvfs_clk;
+
 /* set cpu low power mode before WFI instruction. This function is called
   * mx5 because it can be used for mx50, mx51, and mx53.*/
 void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
@@ -54,9 +60,6 @@ void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
 			stop_mode = 1;
 		}
 		arm_srpgcr |= MXC_SRPGCR_PCR;
-
-		if (tzic_enable_wake(1) != 0)
-			return;
 		break;
 	case STOP_POWER_ON:
 		ccm_clpcr |= 0x2 << MXC_CCM_CLPCR_LPM_OFFSET;
@@ -82,3 +85,18 @@ void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
 		__raw_writel(empgc1, MXC_SRPG_EMPGC1_SRPGCR);
 	}
 }
+
+void mx5_arch_idle(void)
+{
+		if (gpc_dvfs_clk == NULL)
+			gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
+
+		/* gpc clock is needed for SRPG */
+		clk_enable(gpc_dvfs_clk);
+		mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
+		if (tzic_enable_wake() != 0)
+			goto exit;
+		cpu_do_idle();
+exit:
+		clk_disable(gpc_dvfs_clk);
+}
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index 0987923..c4d324a 100644
--- a/arch/arm/plat-mxc/include/mach/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -182,7 +182,7 @@ struct cpu_op {
 	u32 cpu_rate;
 };
 
-int tzic_enable_wake(int is_idle);
+int tzic_enable_wake(void);
 enum mxc_cpu_pwr_mode {
 	WAIT_CLOCKED,		/* wfi only */
 	WAIT_UNCLOCKED,		/* WAIT */
diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h
index 51f02a9..5b6f991 100644
--- a/arch/arm/plat-mxc/include/mach/system.h
+++ b/arch/arm/plat-mxc/include/mach/system.h
@@ -21,6 +21,7 @@
 #include <mach/common.h>
 
 extern void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode);
+extern void mx5_arch_idle(void);
 
 static inline void arch_idle(void)
 {
@@ -51,7 +52,7 @@ static inline void arch_idle(void)
 			"mcr p15, 0, %0, c1, c0, 0\n"
 			: "=r" (reg));
 	} else if (cpu_is_mx51())
-		mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
+		mx5_arch_idle();
 	else
 		cpu_do_idle();
 }
diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c
index e993a18..bd73910 100644
--- a/arch/arm/plat-mxc/tzic.c
+++ b/arch/arm/plat-mxc/tzic.c
@@ -72,14 +72,35 @@ static int tzic_set_irq_fiq(unsigned int irq, unsigned int type)
 #define tzic_set_irq_fiq NULL
 #endif
 
-static unsigned int *wakeup_intr[4];
-
 static struct mxc_extra_irq tzic_extra_irq = {
 #ifdef CONFIG_FIQ
 	.set_irq_fiq = tzic_set_irq_fiq,
 #endif
 };
 
+#ifdef CONFIG_PM
+static void tzic_irq_suspend(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	int idx = gc->irq_base >> 5;
+
+	__raw_writel(gc->wake_active, tzic_base + TZIC_WAKEUP0(idx));
+}
+
+static void tzic_irq_resume(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	int idx = gc->irq_base >> 5;
+
+	__raw_writel(__raw_readl(tzic_base + TZIC_ENSET0(idx)),
+		     tzic_base + TZIC_WAKEUP0(idx));
+}
+
+#else
+#define tzic_irq_suspend NULL
+#define tzic_irq_resume NULL
+#endif
+
 static __init void tzic_init_gc(unsigned int irq_start)
 {
 	struct irq_chip_generic *gc;
@@ -90,12 +111,13 @@ static __init void tzic_init_gc(unsigned int irq_start)
 				    handle_level_irq);
 	gc->private = &tzic_extra_irq;
 	gc->wake_enabled = IRQ_MSK(32);
-	wakeup_intr[idx] = &gc->wake_active;
 
 	ct = gc->chip_types;
 	ct->chip.irq_mask = irq_gc_mask_disable_reg;
 	ct->chip.irq_unmask = irq_gc_unmask_enable_reg;
 	ct->chip.irq_set_wake = irq_gc_set_wake;
+	ct->chip.irq_suspend = tzic_irq_suspend;
+	ct->chip.irq_resume = tzic_irq_resume;
 	ct->regs.disable = TZIC_ENCLEAR0(idx);
 	ct->regs.enable = TZIC_ENSET0(idx);
 
@@ -166,23 +188,19 @@ void __init tzic_init_irq(void __iomem *irqbase)
 /**
  * tzic_enable_wake() - enable wakeup interrupt
  *
- * @param is_idle		1 if called in idle loop (ENSET0 register);
- *				0 to be used when called from low power entry
  * @return			0 if successful; non-zero otherwise
  */
-int tzic_enable_wake(int is_idle)
+int tzic_enable_wake(void)
 {
-	unsigned int i, v;
+	unsigned int i;
 
 	__raw_writel(1, tzic_base + TZIC_DSMINT);
 	if (unlikely(__raw_readl(tzic_base + TZIC_DSMINT) == 0))
 		return -EAGAIN;
 
-	for (i = 0; i < 4; i++) {
-		v = is_idle ? __raw_readl(tzic_base + TZIC_ENSET0(i)) :
-			*wakeup_intr[i];
-		__raw_writel(v, tzic_base + TZIC_WAKEUP0(i));
-	}
+	for (i = 0; i < 4; i++)
+		__raw_writel(__raw_readl(tzic_base + TZIC_ENSET0(i)),
+			     tzic_base + TZIC_WAKEUP0(i));
 
 	return 0;
 }
-- 
1.7.6

             reply	other threads:[~2011-09-30  6:37 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-09-30  6:37 Hui Wang [this message]
2011-10-03  5:24 ` [PATCH] mx5: modify pm and idle Shawn Guo
2011-10-08  1:33   ` Hui Wang
2011-10-04  7:43 ` Sascha Hauer
2011-10-08  1:34   ` Hui Wang
2011-10-08  2:06     ` Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1317364642-22956-1-git-send-email-jason77.wang@gmail.com \
    --to=jason77.wang@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.