From: Mark Salter <msalter@redhat.com>
To: linux-kernel@vger.kernel.org
Cc: linux-arch@vger.kernel.org, Aurelien Jacquiot <a-jacquiot@ti.com>,
Mark Salter <msalter@redhat.com>
Subject: [PATCH v4 16/24] C6X: cache control
Date: Tue, 4 Oct 2011 12:43:53 -0400 [thread overview]
Message-ID: <1317746641-26725-17-git-send-email-msalter@redhat.com> (raw)
In-Reply-To: <1317746641-26725-1-git-send-email-msalter@redhat.com>
From: Aurelien Jacquiot <a-jacquiot@ti.com>
Original port to early 2.6 kernel using TI COFF toolchain.
Brought up to date by Mark Salter <msalter@redhat.com>
Signed-off-by: Aurelien Jacquiot <a-jacquiot@ti.com>
Signed-off-by: Mark Salter <msalter@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
---
arch/c6x/include/asm/cache.h | 90 ++++++++
arch/c6x/include/asm/cacheflush.h | 65 ++++++
arch/c6x/platforms/cache.c | 445 +++++++++++++++++++++++++++++++++++++
3 files changed, 600 insertions(+), 0 deletions(-)
create mode 100644 arch/c6x/include/asm/cache.h
create mode 100644 arch/c6x/include/asm/cacheflush.h
create mode 100644 arch/c6x/platforms/cache.c
diff --git a/arch/c6x/include/asm/cache.h b/arch/c6x/include/asm/cache.h
new file mode 100644
index 0000000..6d521d9
--- /dev/null
+++ b/arch/c6x/include/asm/cache.h
@@ -0,0 +1,90 @@
+/*
+ * Port on Texas Instruments TMS320C6x architecture
+ *
+ * Copyright (C) 2005, 2006, 2009, 2010 Texas Instruments Incorporated
+ * Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _ASM_C6X_CACHE_H
+#define _ASM_C6X_CACHE_H
+
+#include <linux/irqflags.h>
+
+/*
+ * Cache line size
+ */
+#define L1D_CACHE_BYTES 64
+#define L1P_CACHE_BYTES 32
+#define L2_CACHE_BYTES 128
+
+/*
+ * L2 used as cache
+ */
+#define L2MODE_SIZE L2MODE_256K_CACHE
+
+/*
+ * For practical reasons the L1_CACHE_BYTES defines should not be smaller than
+ * the L2 line size
+ */
+#define L1_CACHE_BYTES L2_CACHE_BYTES
+
+#define L2_CACHE_ALIGN_LOW(x) \
+ (((x) & ~(L2_CACHE_BYTES - 1)))
+#define L2_CACHE_ALIGN_UP(x) \
+ (((x) + (L2_CACHE_BYTES - 1)) & ~(L2_CACHE_BYTES - 1))
+#define L2_CACHE_ALIGN_CNT(x) \
+ (((x) + (sizeof(int) - 1)) & ~(sizeof(int) - 1))
+
+#define ARCH_DMA_MINALIGN L1_CACHE_BYTES
+#define ARCH_SLAB_MINALIGN L1_CACHE_BYTES
+
+/*
+ * This is the granularity of hardware cacheability control.
+ */
+#define CACHEABILITY_ALIGN 0x01000000
+
+/*
+ * Align a physical address to MAR regions
+ */
+#define CACHE_REGION_START(v) \
+ (((u32) (v)) & ~(CACHEABILITY_ALIGN - 1))
+#define CACHE_REGION_END(v) \
+ (((u32) (v) + (CACHEABILITY_ALIGN - 1)) & ~(CACHEABILITY_ALIGN - 1))
+
+extern void __init c6x_cache_init(void);
+
+extern void enable_caching(unsigned long start, unsigned long end);
+extern void disable_caching(unsigned long start, unsigned long end);
+
+extern void L1_cache_off(void);
+extern void L1_cache_on(void);
+
+extern void L1P_cache_global_invalidate(void);
+extern void L1D_cache_global_invalidate(void);
+extern void L1D_cache_global_writeback(void);
+extern void L1D_cache_global_writeback_invalidate(void);
+extern void L2_cache_set_mode(unsigned int mode);
+extern void L2_cache_global_writeback_invalidate(void);
+extern void L2_cache_global_writeback(void);
+
+extern void L1P_cache_block_invalidate(unsigned int start, unsigned int end);
+extern void L1D_cache_block_invalidate(unsigned int start, unsigned int end);
+extern void L1D_cache_block_writeback_invalidate(unsigned int start,
+ unsigned int end);
+extern void L1D_cache_block_writeback(unsigned int start, unsigned int end);
+extern void L2_cache_block_invalidate(unsigned int start, unsigned int end);
+extern void L2_cache_block_writeback(unsigned int start, unsigned int end);
+extern void L2_cache_block_writeback_invalidate(unsigned int start,
+ unsigned int end);
+extern void L2_cache_block_invalidate_nowait(unsigned int start,
+ unsigned int end);
+extern void L2_cache_block_writeback_nowait(unsigned int start,
+ unsigned int end);
+
+extern void L2_cache_block_writeback_invalidate_nowait(unsigned int start,
+ unsigned int end);
+
+#endif /* _ASM_C6X_CACHE_H */
diff --git a/arch/c6x/include/asm/cacheflush.h b/arch/c6x/include/asm/cacheflush.h
new file mode 100644
index 0000000..df5db90
--- /dev/null
+++ b/arch/c6x/include/asm/cacheflush.h
@@ -0,0 +1,65 @@
+/*
+ * Port on Texas Instruments TMS320C6x architecture
+ *
+ * Copyright (C) 2004, 2009, 2010 Texas Instruments Incorporated
+ * Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _ASM_C6X_CACHEFLUSH_H
+#define _ASM_C6X_CACHEFLUSH_H
+
+#include <linux/spinlock.h>
+
+#include <asm/setup.h>
+#include <asm/cache.h>
+#include <asm/mman.h>
+#include <asm/page.h>
+#include <asm/string.h>
+
+/*
+ * virtually-indexed cache management (our cache is physically indexed)
+ */
+#define flush_cache_all() do {} while (0)
+#define flush_cache_mm(mm) do {} while (0)
+#define flush_cache_dup_mm(mm) do {} while (0)
+#define flush_cache_range(mm, start, end) do {} while (0)
+#define flush_cache_page(vma, vmaddr, pfn) do {} while (0)
+#define flush_cache_vmap(start, end) do {} while (0)
+#define flush_cache_vunmap(start, end) do {} while (0)
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 0
+#define flush_dcache_page(page) do {} while (0)
+#define flush_dcache_mmap_lock(mapping) do {} while (0)
+#define flush_dcache_mmap_unlock(mapping) do {} while (0)
+
+/*
+ * physically-indexed cache management
+ */
+#define flush_icache_range(s, e) \
+do { \
+ L1D_cache_block_writeback((s), (e)); \
+ L1P_cache_block_invalidate((s), (e)); \
+} while (0)
+
+#define flush_icache_page(vma, page) \
+do { \
+ if ((vma)->vm_flags & PROT_EXEC) \
+ L1D_cache_block_writeback_invalidate(page_address(page), \
+ (unsigned long) page_address(page) + PAGE_SIZE)); \
+ L1P_cache_block_invalidate(page_address(page), \
+ (unsigned long) page_address(page) + PAGE_SIZE)); \
+} while (0)
+
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+do { \
+ memcpy(dst, src, len); \
+ flush_icache_range((unsigned) (dst), (unsigned) (dst) + (len)); \
+} while (0)
+
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+ memcpy(dst, src, len)
+
+#endif /* _ASM_C6X_CACHEFLUSH_H */
diff --git a/arch/c6x/platforms/cache.c b/arch/c6x/platforms/cache.c
new file mode 100644
index 0000000..86318a1
--- /dev/null
+++ b/arch/c6x/platforms/cache.c
@@ -0,0 +1,445 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated
+ * Author: Mark Salter <msalter@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+
+#include <asm/cache.h>
+#include <asm/soc.h>
+
+/*
+ * Internal Memory Control Registers for caches
+ */
+#define IMCR_CCFG 0x0000
+#define IMCR_L1PCFG 0x0020
+#define IMCR_L1PCC 0x0024
+#define IMCR_L1DCFG 0x0040
+#define IMCR_L1DCC 0x0044
+#define IMCR_L2ALLOC0 0x2000
+#define IMCR_L2ALLOC1 0x2004
+#define IMCR_L2ALLOC2 0x2008
+#define IMCR_L2ALLOC3 0x200c
+#define IMCR_L2WBAR 0x4000
+#define IMCR_L2WWC 0x4004
+#define IMCR_L2WIBAR 0x4010
+#define IMCR_L2WIWC 0x4014
+#define IMCR_L2IBAR 0x4018
+#define IMCR_L2IWC 0x401c
+#define IMCR_L1PIBAR 0x4020
+#define IMCR_L1PIWC 0x4024
+#define IMCR_L1DWIBAR 0x4030
+#define IMCR_L1DWIWC 0x4034
+#define IMCR_L1DWBAR 0x4040
+#define IMCR_L1DWWC 0x4044
+#define IMCR_L1DIBAR 0x4048
+#define IMCR_L1DIWC 0x404c
+#define IMCR_L2WB 0x5000
+#define IMCR_L2WBINV 0x5004
+#define IMCR_L2INV 0x5008
+#define IMCR_L1PINV 0x5028
+#define IMCR_L1DWB 0x5040
+#define IMCR_L1DWBINV 0x5044
+#define IMCR_L1DINV 0x5048
+#define IMCR_MAR_BASE 0x8000
+#define IMCR_MAR96_111 0x8180
+#define IMCR_MAR128_191 0x8200
+#define IMCR_MAR224_239 0x8380
+#define IMCR_L2MPFAR 0xa000
+#define IMCR_L2MPFSR 0xa004
+#define IMCR_L2MPFCR 0xa008
+#define IMCR_L2MPLK0 0xa100
+#define IMCR_L2MPLK1 0xa104
+#define IMCR_L2MPLK2 0xa108
+#define IMCR_L2MPLK3 0xa10c
+#define IMCR_L2MPLKCMD 0xa110
+#define IMCR_L2MPLKSTAT 0xa114
+#define IMCR_L2MPPA_BASE 0xa200
+#define IMCR_L1PMPFAR 0xa400
+#define IMCR_L1PMPFSR 0xa404
+#define IMCR_L1PMPFCR 0xa408
+#define IMCR_L1PMPLK0 0xa500
+#define IMCR_L1PMPLK1 0xa504
+#define IMCR_L1PMPLK2 0xa508
+#define IMCR_L1PMPLK3 0xa50c
+#define IMCR_L1PMPLKCMD 0xa510
+#define IMCR_L1PMPLKSTAT 0xa514
+#define IMCR_L1PMPPA_BASE 0xa600
+#define IMCR_L1DMPFAR 0xac00
+#define IMCR_L1DMPFSR 0xac04
+#define IMCR_L1DMPFCR 0xac08
+#define IMCR_L1DMPLK0 0xad00
+#define IMCR_L1DMPLK1 0xad04
+#define IMCR_L1DMPLK2 0xad08
+#define IMCR_L1DMPLK3 0xad0c
+#define IMCR_L1DMPLKCMD 0xad10
+#define IMCR_L1DMPLKSTAT 0xad14
+#define IMCR_L1DMPPA_BASE 0xae00
+#define IMCR_L2PDWAKE0 0xc040
+#define IMCR_L2PDWAKE1 0xc044
+#define IMCR_L2PDSLEEP0 0xc050
+#define IMCR_L2PDSLEEP1 0xc054
+#define IMCR_L2PDSTAT0 0xc060
+#define IMCR_L2PDSTAT1 0xc064
+
+/*
+ * CCFG register values and bits
+ */
+#define L2MODE_0K_CACHE 0x0
+#define L2MODE_32K_CACHE 0x1
+#define L2MODE_64K_CACHE 0x2
+#define L2MODE_128K_CACHE 0x3
+#define L2MODE_256K_CACHE 0x7
+
+#define L2PRIO_URGENT 0x0
+#define L2PRIO_HIGH 0x1
+#define L2PRIO_MEDIUM 0x2
+#define L2PRIO_LOW 0x3
+
+#define CCFG_ID 0x100 /* Invalidate L1P bit */
+#define CCFG_IP 0x200 /* Invalidate L1D bit */
+
+static void __iomem *cache_base;
+
+/*
+ * L1 & L2 caches generic functions
+ */
+#define imcr_get(reg) soc_readl(cache_base + (reg))
+#define imcr_set(reg, value) \
+do { \
+ soc_writel((value), cache_base + (reg)); \
+ soc_readl(cache_base + (reg)); \
+} while (0)
+
+static void cache_block_operation_wait(unsigned int wc_reg)
+{
+ /* Wait for completion */
+ while (imcr_get(wc_reg))
+ cpu_relax();
+}
+
+static DEFINE_SPINLOCK(cache_lock);
+
+/*
+ * Generic function to perform a block cache operation as
+ * invalidate or writeback/invalidate
+ */
+static void cache_block_operation(unsigned int *start,
+ unsigned int *end,
+ unsigned int bar_reg,
+ unsigned int wc_reg)
+{
+ unsigned long flags;
+ unsigned int wcnt =
+ (L2_CACHE_ALIGN_CNT((unsigned int) end)
+ - L2_CACHE_ALIGN_LOW((unsigned int) start)) >> 2;
+ unsigned int wc = 0;
+
+ for (; wcnt; wcnt -= wc, start += wc) {
+loop:
+ spin_lock_irqsave(&cache_lock, flags);
+
+ /*
+ * If another cache operation is occuring
+ */
+ if (unlikely(imcr_get(wc_reg))) {
+ spin_unlock_irqrestore(&cache_lock, flags);
+
+ /* Wait for previous operation completion */
+ cache_block_operation_wait(wc_reg);
+
+ /* Try again */
+ goto loop;
+ }
+
+ imcr_set(bar_reg, L2_CACHE_ALIGN_LOW((unsigned int) start));
+
+ if (wcnt > 0xffff)
+ wc = 0xffff;
+ else
+ wc = wcnt;
+
+ /* Set word count value in the WC register */
+ imcr_set(wc_reg, wc & 0xffff);
+
+ spin_unlock_irqrestore(&cache_lock, flags);
+
+ /* Wait for completion */
+ cache_block_operation_wait(wc_reg);
+ }
+}
+
+static void cache_block_operation_nowait(unsigned int *start,
+ unsigned int *end,
+ unsigned int bar_reg,
+ unsigned int wc_reg)
+{
+ unsigned long flags;
+ unsigned int wcnt =
+ (L2_CACHE_ALIGN_CNT((unsigned int) end)
+ - L2_CACHE_ALIGN_LOW((unsigned int) start)) >> 2;
+ unsigned int wc = 0;
+
+ for (; wcnt; wcnt -= wc, start += wc) {
+
+ spin_lock_irqsave(&cache_lock, flags);
+
+ imcr_set(bar_reg, L2_CACHE_ALIGN_LOW((unsigned int) start));
+
+ if (wcnt > 0xffff)
+ wc = 0xffff;
+ else
+ wc = wcnt;
+
+ /* Set word count value in the WC register */
+ imcr_set(wc_reg, wc & 0xffff);
+
+ spin_unlock_irqrestore(&cache_lock, flags);
+
+ /* Don't wait for completion on last cache operation */
+ if (wcnt > 0xffff)
+ cache_block_operation_wait(wc_reg);
+ }
+}
+
+/*
+ * L1 caches management
+ */
+
+/*
+ * Disable L1 caches
+ */
+void L1_cache_off(void)
+{
+ unsigned int dummy;
+
+ imcr_set(IMCR_L1PCFG, 0);
+ dummy = imcr_get(IMCR_L1PCFG);
+
+ imcr_set(IMCR_L1DCFG, 0);
+ dummy = imcr_get(IMCR_L1DCFG);
+}
+
+/*
+ * Enable L1 caches
+ */
+void L1_cache_on(void)
+{
+ unsigned int dummy;
+
+ imcr_set(IMCR_L1PCFG, 7);
+ dummy = imcr_get(IMCR_L1PCFG);
+
+ imcr_set(IMCR_L1DCFG, 7);
+ dummy = imcr_get(IMCR_L1DCFG);
+}
+
+/*
+ * L1P global-invalidate all
+ */
+void L1P_cache_global_invalidate(void)
+{
+ unsigned int set = 1;
+ imcr_set(IMCR_L1PINV, set);
+ while (imcr_get(IMCR_L1PINV) & 1)
+ cpu_relax();
+}
+
+/*
+ * L1D global-invalidate all
+ *
+ * Warning: this operation causes all updated data in L1D to
+ * be discarded rather than written back to the lower levels of
+ * memory
+ */
+void L1D_cache_global_invalidate(void)
+{
+ unsigned int set = 1;
+ imcr_set(IMCR_L1DINV, set);
+ while (imcr_get(IMCR_L1DINV) & 1)
+ cpu_relax();
+}
+
+void L1D_cache_global_writeback(void)
+{
+ unsigned int set = 1;
+ imcr_set(IMCR_L1DWB, set);
+ while (imcr_get(IMCR_L1DWB) & 1)
+ cpu_relax();
+}
+
+void L1D_cache_global_writeback_invalidate(void)
+{
+ unsigned int set = 1;
+ imcr_set(IMCR_L1DWBINV, set);
+ while (imcr_get(IMCR_L1DWBINV) & 1)
+ cpu_relax();
+}
+
+/*
+ * L2 caches management
+ */
+
+/*
+ * Set L2 operation mode
+ */
+void L2_cache_set_mode(unsigned int mode)
+{
+ unsigned int ccfg = imcr_get(IMCR_CCFG);
+
+ /* Clear and set the L2MODE bits in CCFG */
+ ccfg &= ~7;
+ ccfg |= (mode & 7);
+ imcr_set(IMCR_CCFG, ccfg);
+ ccfg = imcr_get(IMCR_CCFG);
+}
+
+/*
+ * L2 global-writeback and global-invalidate all
+ */
+void L2_cache_global_writeback_invalidate(void)
+{
+ imcr_set(IMCR_L2WBINV, 1);
+ while (imcr_get(IMCR_L2WBINV))
+ cpu_relax();
+}
+
+/*
+ * L2 global-writeback all
+ */
+void L2_cache_global_writeback(void)
+{
+ imcr_set(IMCR_L2WB, 1);
+ while (imcr_get(IMCR_L2WB))
+ cpu_relax();
+}
+
+/*
+ * Cacheability controls
+ */
+void enable_caching(unsigned long start, unsigned long end)
+{
+ unsigned int mar = IMCR_MAR_BASE + ((start >> 24) << 2);
+ unsigned int mar_e = IMCR_MAR_BASE + ((end >> 24) << 2);
+
+ for (; mar <= mar_e; mar += 4)
+ imcr_set(mar, imcr_get(mar) | 1);
+}
+
+void disable_caching(unsigned long start, unsigned long end)
+{
+ unsigned int mar = IMCR_MAR_BASE + ((start >> 24) << 2);
+ unsigned int mar_e = IMCR_MAR_BASE + ((end >> 24) << 2);
+
+ for (; mar <= mar_e; mar += 4)
+ imcr_set(mar, imcr_get(mar) & ~1);
+}
+
+
+/*
+ * L1 block operations
+ */
+void L1P_cache_block_invalidate(unsigned int start, unsigned int end)
+{
+ cache_block_operation((unsigned int *) start,
+ (unsigned int *) end,
+ IMCR_L1PIBAR, IMCR_L1PIWC);
+}
+
+void L1D_cache_block_invalidate(unsigned int start, unsigned int end)
+{
+ cache_block_operation((unsigned int *) start,
+ (unsigned int *) end,
+ IMCR_L1DIBAR, IMCR_L1DIWC);
+}
+
+void L1D_cache_block_writeback_invalidate(unsigned int start, unsigned int end)
+{
+ cache_block_operation((unsigned int *) start,
+ (unsigned int *) end,
+ IMCR_L1DWIBAR, IMCR_L1DWIWC);
+}
+
+void L1D_cache_block_writeback(unsigned int start, unsigned int end)
+{
+ cache_block_operation((unsigned int *) start,
+ (unsigned int *) end,
+ IMCR_L1DWBAR, IMCR_L1DWWC);
+}
+
+/*
+ * L2 block operations
+ */
+void L2_cache_block_invalidate(unsigned int start, unsigned int end)
+{
+ cache_block_operation((unsigned int *) start,
+ (unsigned int *) end,
+ IMCR_L2IBAR, IMCR_L2IWC);
+}
+
+void L2_cache_block_writeback(unsigned int start, unsigned int end)
+{
+ cache_block_operation((unsigned int *) start,
+ (unsigned int *) end,
+ IMCR_L2WBAR, IMCR_L2WWC);
+}
+
+void L2_cache_block_writeback_invalidate(unsigned int start, unsigned int end)
+{
+ cache_block_operation((unsigned int *) start,
+ (unsigned int *) end,
+ IMCR_L2WIBAR, IMCR_L2WIWC);
+}
+
+void L2_cache_block_invalidate_nowait(unsigned int start, unsigned int end)
+{
+ cache_block_operation_nowait((unsigned int *) start,
+ (unsigned int *) end,
+ IMCR_L2IBAR, IMCR_L2IWC);
+}
+
+void L2_cache_block_writeback_nowait(unsigned int start, unsigned int end)
+{
+ cache_block_operation_nowait((unsigned int *) start,
+ (unsigned int *) end,
+ IMCR_L2WBAR, IMCR_L2WWC);
+}
+
+void L2_cache_block_writeback_invalidate_nowait(unsigned int start,
+ unsigned int end)
+{
+ cache_block_operation_nowait((unsigned int *) start,
+ (unsigned int *) end,
+ IMCR_L2WIBAR, IMCR_L2WIWC);
+}
+
+
+/*
+ * L1 and L2 caches configuration
+ */
+void __init c6x_cache_init(void)
+{
+ struct device_node *node;
+
+ node = of_find_compatible_node(NULL, NULL, "ti,c64x+cache");
+ if (!node)
+ return;
+
+ cache_base = of_iomap(node, 0);
+
+ of_node_put(node);
+
+ if (!cache_base)
+ return;
+
+ /* Set L2 caches on the the whole L2 SRAM memory */
+ L2_cache_set_mode(L2MODE_SIZE);
+
+ /* Enable L1 */
+ L1_cache_on();
+}
--
1.7.6.2
next prev parent reply other threads:[~2011-10-04 16:43 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-04 16:43 [PATCH v4 00/24] C6X: New architecture Mark Salter
2011-10-04 16:43 ` [PATCH v4 01/24] fix default __strnlen_user macro Mark Salter
2011-10-04 16:43 ` [PATCH v4 02/24] fixed generic page.h for non-zero PAGE_OFFSET Mark Salter
2011-10-04 16:43 ` [PATCH v4 03/24] add ELF machine define for TI C6X DSPs Mark Salter
2011-10-04 16:43 ` [PATCH v4 04/24] add missing __iomem to generic iounmap declaration Mark Salter
2011-10-04 16:43 ` [PATCH v4 05/24] C6X: build infrastructure Mark Salter
2011-10-04 19:11 ` Arnd Bergmann
2011-10-04 16:43 ` [PATCH v4 06/24] C6X: early boot code Mark Salter
2011-10-04 19:11 ` Arnd Bergmann
[not found] ` <1317746641-26725-1-git-send-email-msalter-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2011-10-04 16:43 ` [PATCH v4 07/24] C6X: devicetree support Mark Salter
2011-10-04 16:43 ` Mark Salter
2011-10-04 19:24 ` Arnd Bergmann
2011-10-04 16:43 ` [PATCH v4 08/24] C6X: memory management and DMA support Mark Salter
2011-10-04 19:10 ` Arnd Bergmann
2011-10-04 16:43 ` [PATCH v4 09/24] C6X: process management Mark Salter
2011-10-04 16:43 ` [PATCH v4 10/24] C6X: signal management Mark Salter
2011-10-04 16:43 ` [PATCH v4 11/24] C6X: time management Mark Salter
2011-10-04 18:04 ` Thomas Gleixner
2011-10-04 19:13 ` Arnd Bergmann
2011-10-04 16:43 ` [PATCH v4 12/24] C6X: interrupt handling Mark Salter
2011-10-04 18:06 ` Thomas Gleixner
2011-10-04 19:12 ` Arnd Bergmann
2011-10-04 16:43 ` [PATCH v4 13/24] C6X: syscalls Mark Salter
2011-10-04 16:43 ` [PATCH v4 14/24] C6X: build infrastructure Mark Salter
2011-10-04 16:43 ` [PATCH v4 15/24] C6X: clocks Mark Salter
2011-10-04 16:43 ` Mark Salter [this message]
2011-10-04 16:43 ` [PATCH v4 17/24] C6X: loadable module support Mark Salter
2011-10-04 19:08 ` Arnd Bergmann
2011-10-04 16:43 ` [PATCH v4 18/24] C6X: ptrace support Mark Salter
2011-10-04 19:07 ` Arnd Bergmann
2011-10-04 16:43 ` [PATCH v4 19/24] C6X: headers Mark Salter
2011-10-04 18:06 ` Arnd Bergmann
2011-10-04 16:43 ` [PATCH v4 20/24] C6X: library code Mark Salter
2011-10-04 18:04 ` Arnd Bergmann
2011-10-04 16:43 ` [PATCH v4 21/24] C6X: general SoC support Mark Salter
2011-10-04 19:23 ` Arnd Bergmann
2011-10-04 16:43 ` [PATCH v4 22/24] C6X: EMIF - External Memory Interface Mark Salter
2011-10-04 16:44 ` [PATCH v4 23/24] C6X: DSCR - Device State Configuration Registers Mark Salter
2011-10-04 16:44 ` [PATCH v4 24/24] C6X: MAINTAINERS Mark Salter
2011-10-04 19:27 ` [PATCH v4 00/24] C6X: New architecture Arnd Bergmann
2011-10-05 12:52 ` Mark Salter
2011-10-05 16:16 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1317746641-26725-17-git-send-email-msalter@redhat.com \
--to=msalter@redhat.com \
--cc=a-jacquiot@ti.com \
--cc=linux-arch@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.