All of lore.kernel.org
 help / color / mirror / Atom feed
From: Axel Lin <axel.lin@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>,
	Ian Lartey <ian@opensource.wolfsonmicro.com>,
	Dimitris Papastamos <dp@opensource.wolfsonmicro.com>,
	Liam Girdwood <lrg@ti.com>,
	alsa-devel@alsa-project.org
Subject: [PATCH 09/10] ASoC: wm8974: Convert to snd_soc_cache_sync
Date: Thu, 06 Oct 2011 14:20:33 +0800	[thread overview]
Message-ID: <1317882033.13399.13.camel@phoenix> (raw)
In-Reply-To: <1317881417.13399.1.camel@phoenix>

Convert to snd_soc_cache_sync for sync reg_cache with the hardware.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
 sound/soc/codecs/wm8974.c |   29 ++++++++++++++++++-----------
 1 files changed, 18 insertions(+), 11 deletions(-)

diff --git a/sound/soc/codecs/wm8974.c b/sound/soc/codecs/wm8974.c
index ca646a8..e25f0ad 100644
--- a/sound/soc/codecs/wm8974.c
+++ b/sound/soc/codecs/wm8974.c
@@ -46,6 +46,17 @@ static const u16 wm8974_reg[WM8974_CACHEREGNUM] = {
 	0x0000,
 };
 
+static int wm8974_volatile_register(struct snd_soc_codec *codec,
+				    unsigned int reg)
+{
+	switch (reg) {
+	case WM8974_RESET:
+		return 1;
+	default:
+		return 0;
+	}
+}
+
 #define WM8974_POWER1_BIASEN  0x08
 #define WM8974_POWER1_BUFIOEN 0x04
 
@@ -517,6 +528,7 @@ static int wm8974_mute(struct snd_soc_dai *dai, int mute)
 static int wm8974_set_bias_level(struct snd_soc_codec *codec,
 	enum snd_soc_bias_level level)
 {
+	int ret;
 	u16 power1 = snd_soc_read(codec, WM8974_POWER1) & ~0x3;
 
 	switch (level) {
@@ -530,6 +542,11 @@ static int wm8974_set_bias_level(struct snd_soc_codec *codec,
 		power1 |= WM8974_POWER1_BIASEN | WM8974_POWER1_BUFIOEN;
 
 		if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
+			ret = snd_soc_cache_sync(codec);
+			if (ret < 0) {
+				dev_err(codec->dev, "Failed to sync cache: %d\n", ret);
+				return ret;
+			}
 			/* Initial cap charge at VMID 5k */
 			snd_soc_write(codec, WM8974_POWER1, power1 | 0x3);
 			mdelay(100);
@@ -589,18 +606,7 @@ static int wm8974_suspend(struct snd_soc_codec *codec, pm_message_t state)
 
 static int wm8974_resume(struct snd_soc_codec *codec)
 {
-	int i;
-	u8 data[2];
-	u16 *cache = codec->reg_cache;
-
-	/* Sync reg_cache with the hardware */
-	for (i = 0; i < ARRAY_SIZE(wm8974_reg); i++) {
-		data[0] = (i << 1) | ((cache[i] >> 8) & 0x0001);
-		data[1] = cache[i] & 0x00ff;
-		codec->hw_write(codec->control_data, data, 2);
-	}
 	wm8974_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
-
 	return 0;
 }
 
@@ -644,6 +650,7 @@ static struct snd_soc_codec_driver soc_codec_dev_wm8974 = {
 	.reg_cache_size = ARRAY_SIZE(wm8974_reg),
 	.reg_word_size = sizeof(u16),
 	.reg_cache_default = wm8974_reg,
+	.volatile_register = wm8974_volatile_register,
 };
 
 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
-- 
1.7.4.1

  parent reply	other threads:[~2011-10-06  6:20 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-10-06  6:10 [PATCH 00/10] Convert wm8xxx codec drivers to use snd_soc_cache_sync Axel Lin
2011-10-06  6:10 ` Axel Lin
2011-10-06  6:11 ` [PATCH 01/10] ASoC: wm8510: Convert to snd_soc_cache_sync Axel Lin
2011-10-06  6:11   ` Axel Lin
2011-10-06 13:22   ` Mark Brown
2011-10-06 13:22     ` Mark Brown
2011-10-06  6:13 ` [PATCH 02/10] ASoC: wm8711: " Axel Lin
2011-10-06  6:13   ` Axel Lin
2011-10-06  6:14 ` [PATCH 03/10] ASoC: wm8731: " Axel Lin
2011-10-06  6:14   ` Axel Lin
2011-10-06  6:15 ` [PATCH 04/10] ASoC: wm8750: " Axel Lin
2011-10-06  6:15   ` Axel Lin
2011-10-06  6:16 ` [PATCH 05/10] ASoC: wm8776: " Axel Lin
2011-10-06  6:16   ` Axel Lin
2011-10-06  6:17 ` [PATCH 06/10] ASoC: wm8940: " Axel Lin
2011-10-06  6:17   ` Axel Lin
2011-10-06 11:28   ` Jonathan Cameron
2011-10-06 11:33     ` Axel Lin
2011-10-06 11:33       ` Axel Lin
2011-10-06 13:18     ` Mark Brown
2011-10-06 13:35       ` Jonathan Cameron
2011-10-06  6:18 ` [PATCH 07/10] ASoC: wm8960: " Axel Lin
2011-10-06  6:18   ` Axel Lin
2011-10-06  7:25   ` [PATCH 07/10 v2] " Axel Lin
2011-10-06  7:25     ` Axel Lin
2011-10-06  6:19 ` [PATCH 08/10] ASoC: wm8971: " Axel Lin
2011-10-06  6:19   ` Axel Lin
2011-10-06  6:20 ` Axel Lin [this message]
2011-10-06  6:21 ` [PATCH 10/10] ASoC: wm8988: " Axel Lin
2011-10-06  6:21   ` Axel Lin
2011-10-06  6:52 ` [PATCH 00/10] Convert wm8xxx codec drivers to use snd_soc_cache_sync Axel Lin
2011-10-06  6:52   ` Axel Lin
2011-10-06  7:10   ` Axel Lin
2011-10-06  7:10     ` Axel Lin
2011-10-06 10:14 ` Mark Brown
2011-10-06 10:14   ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1317882033.13399.13.camel@phoenix \
    --to=axel.lin@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@opensource.wolfsonmicro.com \
    --cc=dp@opensource.wolfsonmicro.com \
    --cc=ian@opensource.wolfsonmicro.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lrg@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.