From: Ashish Chavan <ashish.chavan@kpitcummins.com>
To: Mark Brown <broonie@opensource.wolfsonmicro.com>,
lrg <lrg@ti.com>, alsa-devel <alsa-devel@alsa-project.org>
Cc: linux-kernel <linux-kernel@vger.kernel.org>,
"kuninori.morimoto.gx" <kuninori.morimoto.gx@renesas.com>,
David Dajun Chen <david.chen@diasemi.com>
Subject: [PATCH v2 4/9] ASoC: da7210: Add support for mute and zero cross controls
Date: Thu, 13 Oct 2011 19:41:53 +0530 [thread overview]
Message-ID: <1318515113.12107.481.camel@matrix> (raw)
This patch adds support for below set of controls,
(1) Mute controls for MIC, AUX, ADC and DAC
(2) Zero cross controls for head phone, AUX, INPGA and line out
(3) Head phone mode selection - class H or G
Signed-off-by: Ashish Chavan <ashish.chavan@kpitcummins.com>
Signed-off-by: David Dajun Chen <dchen@diasemi.com>
---
Changes since v1:
- Changed Mic mute control to a double control
- Fixed a typo
---
sound/soc/codecs/da7210.c | 32 ++++++++++++++++++++++++++++++++
1 files changed, 32 insertions(+), 0 deletions(-)
diff --git a/sound/soc/codecs/da7210.c b/sound/soc/codecs/da7210.c
index 7e36ed6..cb00935 100644
--- a/sound/soc/codecs/da7210.c
+++ b/sound/soc/codecs/da7210.c
@@ -45,6 +45,7 @@
#define DA7210_DAC_L 0x15
#define DA7210_DAC_R 0x16
#define DA7210_DAC_SEL 0x17
+#define DA7210_SOFTMUTE 0x18
#define DA7210_DAC_EQ1_2 0x19
#define DA7210_DAC_EQ3_4 0x1A
#define DA7210_DAC_EQ5 0x1B
@@ -56,6 +57,7 @@
#define DA7210_HP_L_VOL 0x21
#define DA7210_HP_R_VOL 0x22
#define DA7210_HP_CFG 0x23
+#define DA7210_ZERO_CROSS 0x24
#define DA7210_DAI_SRC_SEL 0x25
#define DA7210_DAI_CFG1 0x26
#define DA7210_DAI_CFG3 0x28
@@ -166,6 +168,9 @@
/* AUX2 bit fields */
#define DA7210_AUX2_EN (1 << 3)
+/* SOFTMUTE bit fields */
+#define DA7210_RAMP_EN (1 << 6)
+
#define DA7210_VERSION "0.0.1"
/*
@@ -211,6 +216,13 @@ static const unsigned int aux1_vol_tlv[] = {
0x11, 0x3f, TLV_DB_SCALE_ITEM(-4800, 150, 0)
};
+static const char *da7210_hp_mode_txt[] = {
+ "Class H", "Class G"
+};
+
+static const struct soc_enum da7210_hp_mode_sel =
+ SOC_ENUM_SINGLE(DA7210_HP_CFG, 0, 2, da7210_hp_mode_txt);
+
static const struct snd_kcontrol_new da7210_snd_controls[] = {
SOC_DOUBLE_R_TLV("HeadPhone Playback Volume",
@@ -267,6 +279,23 @@ static const struct snd_kcontrol_new da7210_snd_controls[] = {
eq_gain_tlv),
SOC_SINGLE_TLV("ADC EQ5 Volume", DA7210_ADC_EQ5, 0, 0xf, 1,
eq_gain_tlv),
+
+ /* Mute controls */
+ SOC_DOUBLE_R("Mic Mute Switch", DA7210_MIC_L, DA7210_MIC_R, 3, 1, 0),
+ SOC_SINGLE("Aux2 Mute Switch", DA7210_AUX2, 2, 1, 0),
+ SOC_SINGLE("ADC Left Mute Switch", DA7210_ADC, 2, 1, 0),
+ SOC_SINGLE("ADC Right Mute Switch", DA7210_ADC, 6, 1, 0),
+ SOC_SINGLE("DAC Mute Switch", DA7210_DAC_HPF, 2, 1, 0),
+ SOC_SINGLE("DAC Soft Mute Switch", DA7210_SOFTMUTE, 7, 1, 0),
+ SOC_SINGLE("DAC Soft Mute Rate", DA7210_SOFTMUTE, 0, 0x7, 0),
+
+ /* Zero cross controls */
+ SOC_DOUBLE("Aux1 ZC Switch", DA7210_ZERO_CROSS, 0, 1, 1, 0),
+ SOC_DOUBLE("In PGA ZC Switch", DA7210_ZERO_CROSS, 2, 3, 1, 0),
+ SOC_DOUBLE("Lineout ZC Switch", DA7210_ZERO_CROSS, 4, 5, 1, 0),
+ SOC_DOUBLE("Headphone ZC Switch", DA7210_ZERO_CROSS, 6, 7, 1, 0),
+
+ SOC_ENUM("Headphone Class", da7210_hp_mode_sel),
};
/* Codec private data */
@@ -597,6 +626,9 @@ static int da7210_probe(struct snd_soc_codec *codec)
/* Enable Aux2 */
snd_soc_write(codec, DA7210_AUX2, DA7210_AUX2_EN);
+ /* Enable ramp mode for DAC gain update */
+ snd_soc_write(codec, DA7210_SOFTMUTE, DA7210_RAMP_EN);
+
/* Diable PLL and bypass it */
snd_soc_write(codec, DA7210_PLL, DA7210_PLL_FS_48000);
--
1.7.1
next reply other threads:[~2011-10-13 14:03 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-13 14:11 Ashish Chavan [this message]
2011-10-13 16:32 ` [PATCH v2 4/9] ASoC: da7210: Add support for mute and zero cross controls Mark Brown
2011-10-13 16:32 ` [alsa-devel] " Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1318515113.12107.481.camel@matrix \
--to=ashish.chavan@kpitcummins.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=david.chen@diasemi.com \
--cc=kuninori.morimoto.gx@renesas.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.