[PATCH] drm/radeon/kms: remove useless radeon_ddc_dump()

[alexdeucher@gmail.com]

From: Alex Deucher <alexander.deucher@amd.com>

The function didn't work with DP, eDP, or DP bridge
connectors and thus confused users as it lead them to
believe nothing was connected or the EDID was invalid
when in fact is was, just on the aux bus rather an i2c.

It should also speed up module loading as it avoids a
bunch of extra DDC probing.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
---
 drivers/gpu/drm/radeon/radeon_display.c |   33 -------------------------------
 1 files changed, 0 insertions(+), 33 deletions(-)

diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c
index 6adb3e5..4998736 100644
--- a/drivers/gpu/drm/radeon/radeon_display.c
+++ b/drivers/gpu/drm/radeon/radeon_display.c
@@ -33,8 +33,6 @@
 #include "drm_crtc_helper.h"
 #include "drm_edid.h"
 
-static int radeon_ddc_dump(struct drm_connector *connector);
-
 static void avivo_crtc_load_lut(struct drm_crtc *crtc)
 {
 	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
@@ -669,7 +667,6 @@ static void radeon_print_display_setup(struct drm_device *dev)
 static bool radeon_setup_enc_conn(struct drm_device *dev)
 {
 	struct radeon_device *rdev = dev->dev_private;
-	struct drm_connector *drm_connector;
 	bool ret = false;
 
 	if (rdev->bios) {
@@ -689,8 +686,6 @@ static bool radeon_setup_enc_conn(struct drm_device *dev)
 	if (ret) {
 		radeon_setup_encoder_clones(dev);
 		radeon_print_display_setup(dev);
-		list_for_each_entry(drm_connector, &dev->mode_config.connector_list, head)
-			radeon_ddc_dump(drm_connector);
 	}
 
 	return ret;
@@ -743,34 +738,6 @@ int radeon_ddc_get_modes(struct radeon_connector *radeon_connector)
 	return 0;
 }
 
-static int radeon_ddc_dump(struct drm_connector *connector)
-{
-	struct edid *edid;
-	struct radeon_connector *radeon_connector = to_radeon_connector(connector);
-	int ret = 0;
-
-	/* on hw with routers, select right port */
-	if (radeon_connector->router.ddc_valid)
-		radeon_router_select_ddc_port(radeon_connector);
-
-	if (!radeon_connector->ddc_bus)
-		return -1;
-	edid = drm_get_edid(connector, &radeon_connector->ddc_bus->adapter);
-	/* Log EDID retrieval status here. In particular with regard to
-	 * connectors with requires_extended_probe flag set, that will prevent
-	 * function radeon_dvi_detect() to fetch EDID on this connector,
-	 * as long as there is no valid EDID header found */
-	if (edid) {
-		DRM_INFO("Radeon display connector %s: Found valid EDID",
-				drm_get_connector_name(connector));
-		kfree(edid);
-	} else {
-		DRM_INFO("Radeon display connector %s: No monitor connected or invalid EDID",
-				drm_get_connector_name(connector));
-	}
-	return ret;
-}
-
 /* avivo */
 static void avivo_get_fb_div(struct radeon_pll *pll,
 			     u32 target_clock,
-- 
1.7.1.1