From: Adrian Hunter <adrian.hunter@intel.com>
To: Chris Ball <cjb@laptop.org>
Cc: linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org,
Adrian Hunter <adrian.hunter@intel.com>
Subject: [PATCH V2 3/4] mmc: sdhci-pci: add platform data
Date: Wed, 2 Nov 2011 08:57:20 +0200 [thread overview]
Message-ID: <1320217041-2580-4-git-send-email-adrian.hunter@intel.com> (raw)
In-Reply-To: <1320217041-2580-1-git-send-email-adrian.hunter@intel.com>
Add a means of getting platform data for the SDHCI PCI
devices. The data is stored against the slot not the
device in order to support multi-slot devices.
The data allows platform-specific setup (such as getting
GPIO numbers from firmware or setting up wl12xx for SDIO)
to be done in platform support files instead of the
sdhci-pci driver.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
---
drivers/Makefile | 2 +-
drivers/mmc/Makefile | 3 +--
drivers/mmc/host/Makefile | 1 +
drivers/mmc/host/sdhci-pci-data.c | 5 +++++
drivers/mmc/host/sdhci-pci.c | 32 ++++++++++++++++++++++++++++----
include/linux/mmc/sdhci-pci-data.h | 18 ++++++++++++++++++
6 files changed, 54 insertions(+), 7 deletions(-)
create mode 100644 drivers/mmc/host/sdhci-pci-data.c
create mode 100644 include/linux/mmc/sdhci-pci-data.h
diff --git a/drivers/Makefile b/drivers/Makefile
index 7fa433a..fe621d9 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -95,7 +95,7 @@ obj-$(CONFIG_EISA) += eisa/
obj-y += lguest/
obj-$(CONFIG_CPU_FREQ) += cpufreq/
obj-$(CONFIG_CPU_IDLE) += cpuidle/
-obj-$(CONFIG_MMC) += mmc/
+obj-y += mmc/
obj-$(CONFIG_MEMSTICK) += memstick/
obj-y += leds/
obj-$(CONFIG_INFINIBAND) += infiniband/
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index 12eef39..400756e 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -6,5 +6,4 @@ subdir-ccflags-$(CONFIG_MMC_DEBUG) := -DDEBUG
obj-$(CONFIG_MMC) += core/
obj-$(CONFIG_MMC) += card/
-obj-$(CONFIG_MMC) += host/
-
+obj-$(subst m,y,$(CONFIG_MMC)) += host/
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index b4b83f3..745f8fc 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_MMC_MXC) += mxcmmc.o
obj-$(CONFIG_MMC_MXS) += mxs-mmc.o
obj-$(CONFIG_MMC_SDHCI) += sdhci.o
obj-$(CONFIG_MMC_SDHCI_PCI) += sdhci-pci.o
+obj-$(subst m,y,$(CONFIG_MMC_SDHCI_PCI)) += sdhci-pci-data.o
obj-$(CONFIG_MMC_SDHCI_PXAV3) += sdhci-pxav3.o
obj-$(CONFIG_MMC_SDHCI_PXAV2) += sdhci-pxav2.o
obj-$(CONFIG_MMC_SDHCI_S3C) += sdhci-s3c.o
diff --git a/drivers/mmc/host/sdhci-pci-data.c b/drivers/mmc/host/sdhci-pci-data.c
new file mode 100644
index 0000000..a611217
--- /dev/null
+++ b/drivers/mmc/host/sdhci-pci-data.c
@@ -0,0 +1,5 @@
+#include <linux/module.h>
+#include <linux/mmc/sdhci-pci-data.h>
+
+struct sdhci_pci_data *(*sdhci_pci_get_data)(struct pci_dev *pdev, int slotno);
+EXPORT_SYMBOL_GPL(sdhci_pci_get_data);
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index d833d9c..9d1874a 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -25,6 +25,7 @@
#include <linux/gpio.h>
#include <linux/sfi.h>
#include <linux/pm_runtime.h>
+#include <linux/mmc/sdhci-pci-data.h>
#include "sdhci.h"
@@ -62,6 +63,7 @@ struct sdhci_pci_fixes {
struct sdhci_pci_slot {
struct sdhci_pci_chip *chip;
struct sdhci_host *host;
+ struct sdhci_pci_data *data;
int pci_bar;
int rst_n_gpio;
@@ -1188,11 +1190,12 @@ static const struct dev_pm_ops sdhci_pci_pm_ops = {
\*****************************************************************************/
static struct sdhci_pci_slot * __devinit sdhci_pci_probe_slot(
- struct pci_dev *pdev, struct sdhci_pci_chip *chip, int bar)
+ struct pci_dev *pdev, struct sdhci_pci_chip *chip, int first_bar,
+ int slotno)
{
struct sdhci_pci_slot *slot;
struct sdhci_host *host;
- int ret;
+ int ret, bar = first_bar + slotno;
if (!(pci_resource_flags(pdev, bar) & IORESOURCE_MEM)) {
dev_err(&pdev->dev, "BAR %d is not iomem. Aborting.\n", bar);
@@ -1227,6 +1230,20 @@ static struct sdhci_pci_slot * __devinit sdhci_pci_probe_slot(
slot->pci_bar = bar;
slot->rst_n_gpio = -EINVAL;
+ /* Retrieve platform data if there is any */
+ if (*sdhci_pci_get_data)
+ slot->data = sdhci_pci_get_data(pdev, slotno);
+
+ if (slot->data) {
+ if (slot->data->setup) {
+ ret = slot->data->setup(slot->data);
+ if (ret) {
+ dev_err(&pdev->dev, "platform setup failed\n");
+ goto free;
+ }
+ }
+ }
+
host->hw_name = "PCI";
host->ops = &sdhci_pci_ops;
host->quirks = chip->quirks;
@@ -1236,7 +1253,7 @@ static struct sdhci_pci_slot * __devinit sdhci_pci_probe_slot(
ret = pci_request_region(pdev, bar, mmc_hostname(host->mmc));
if (ret) {
dev_err(&pdev->dev, "cannot request region\n");
- goto free;
+ goto cleanup;
}
host->ioaddr = pci_ioremap_bar(pdev, bar);
@@ -1270,6 +1287,10 @@ unmap:
release:
pci_release_region(pdev, bar);
+cleanup:
+ if (slot->data && slot->data->cleanup)
+ slot->data->cleanup(slot->data);
+
free:
sdhci_free_host(host);
@@ -1291,6 +1312,9 @@ static void sdhci_pci_remove_slot(struct sdhci_pci_slot *slot)
if (slot->chip->fixes && slot->chip->fixes->remove_slot)
slot->chip->fixes->remove_slot(slot, dead);
+ if (slot->data && slot->data->cleanup)
+ slot->data->cleanup(slot->data);
+
pci_release_region(slot->chip->pdev, slot->pci_bar);
sdhci_free_host(slot->host);
@@ -1377,7 +1401,7 @@ static int __devinit sdhci_pci_probe(struct pci_dev *pdev,
slots = chip->num_slots; /* Quirk may have changed this */
for (i = 0; i < slots; i++) {
- slot = sdhci_pci_probe_slot(pdev, chip, first_bar + i);
+ slot = sdhci_pci_probe_slot(pdev, chip, first_bar, i);
if (IS_ERR(slot)) {
for (i--; i >= 0; i--)
sdhci_pci_remove_slot(chip->slots[i]);
diff --git a/include/linux/mmc/sdhci-pci-data.h b/include/linux/mmc/sdhci-pci-data.h
new file mode 100644
index 0000000..8959604
--- /dev/null
+++ b/include/linux/mmc/sdhci-pci-data.h
@@ -0,0 +1,18 @@
+#ifndef LINUX_MMC_SDHCI_PCI_DATA_H
+#define LINUX_MMC_SDHCI_PCI_DATA_H
+
+struct pci_dev;
+
+struct sdhci_pci_data {
+ struct pci_dev *pdev;
+ int slotno;
+ int rst_n_gpio; /* Set to -EINVAL if unused */
+ int cd_gpio; /* Set to -EINVAL if unused */
+ int (*setup)(struct sdhci_pci_data *data);
+ void (*cleanup)(struct sdhci_pci_data *data);
+};
+
+extern struct sdhci_pci_data *(*sdhci_pci_get_data)(struct pci_dev *pdev,
+ int slotno);
+
+#endif
--
1.7.6.4
next prev parent reply other threads:[~2011-11-02 6:57 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-02 6:57 [PATCH V2 0/4] mmc: sdhci/sdhci-pci: prepare for wl12xx/SDIO Adrian Hunter
2011-11-02 6:57 ` [PATCH V2 1/4] mmc: sdhci: fix vmmc handling Adrian Hunter
2011-11-02 6:57 ` [PATCH V2 2/4] mmc: sdhci: prevent card detection activity for non-removable cards Adrian Hunter
2011-11-02 6:57 ` Adrian Hunter [this message]
2011-11-02 6:57 ` [PATCH V2 4/4] mmc: sdhci-pci: get gpio numbers from platform data Adrian Hunter
2011-12-09 10:34 ` [PATCH V2 0/4] mmc: sdhci/sdhci-pci: prepare for wl12xx/SDIO Adrian Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1320217041-2580-4-git-send-email-adrian.hunter@intel.com \
--to=adrian.hunter@intel.com \
--cc=cjb@laptop.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.