[U-Boot] [PATCH 33/56] mpc8xx/i2c.c: replace PRINTD() by debug()

[Wolfgang Denk <wd@denx.de>]

This also fixes some GCC 4.6 build warnings like:
warning: variable 'txbd' set but not used [-Wunused-but-set-variable]
warning: variable 'rxbd' set but not used [-Wunused-but-set-variable]

Signed-off-by: WOlfgang Denk <wd@denx.de>
Cc: Heiko Schocher <hs@denx.de>
---
 arch/powerpc/cpu/mpc8xx/i2c.c |   94 ++++++++++++++++++++---------------------
 1 files changed, 46 insertions(+), 48 deletions(-)

diff --git a/arch/powerpc/cpu/mpc8xx/i2c.c b/arch/powerpc/cpu/mpc8xx/i2c.c
index 7c3727c..3e5ea3a 100644
--- a/arch/powerpc/cpu/mpc8xx/i2c.c
+++ b/arch/powerpc/cpu/mpc8xx/i2c.c
@@ -39,9 +39,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-/* define to enable debug messages */
-#undef	DEBUG_I2C
-
 /* tx/rx timeout (we need the i2c early, so we don't use get_timer()) */
 #define TOUT_LOOP 1000000
 
@@ -101,12 +98,6 @@ typedef struct i2c_state {
 #define     I2CECB_TX_MASK	0x0f  /* mask for error bits                  */
 #define I2CECB_TIMEOUT		0x40  /* this is a timeout error              */
 
-#ifdef DEBUG_I2C
-#define PRINTD(x) printf x
-#else
-#define PRINTD(x)
-#endif
-
 /*
  * Returns the best value of I2BRG to meet desired clock speed of I2C with
  * input parameters (clock speed, filter, and predivider value).
@@ -119,18 +110,18 @@ i2c_roundrate(int hz, int speed, int filter, int modval,
 {
 	int moddiv = 1 << (5 - (modval & 3)), brgdiv, div;
 
-	PRINTD(("\t[I2C] trying hz=%d, speed=%d, filter=%d, modval=%d\n",
-		hz, speed, filter, modval));
+	debug("\t[I2C] trying hz=%d, speed=%d, filter=%d, modval=%d\n",
+		hz, speed, filter, modval);
 
 	div = moddiv * speed;
 	brgdiv = (hz + div - 1) / div;
 
-	PRINTD(("\t\tmoddiv=%d, brgdiv=%d\n", moddiv, brgdiv));
+	debug("\t\tmoddiv=%d, brgdiv=%d\n", moddiv, brgdiv);
 
 	*brgval = ((brgdiv + 1) / 2) - 3 - (2 * filter);
 
 	if ((*brgval < 0) || (*brgval > 255)) {
-		PRINTD(("\t\trejected brgval=%d\n", *brgval));
+		debug("\t\trejected brgval=%d\n", *brgval);
 		return -1;
 	}
 
@@ -138,7 +129,7 @@ i2c_roundrate(int hz, int speed, int filter, int modval,
 	div = moddiv * brgdiv;
 	*totspeed = hz / div;
 
-	PRINTD(("\t\taccepted brgval=%d, totspeed=%d\n", *brgval, *totspeed));
+	debug("\t\taccepted brgval=%d, totspeed=%d\n", *brgval, *totspeed);
 
 	return 0;
 }
@@ -173,21 +164,22 @@ static int i2c_setrate(int hz, int speed)
 		}
 	}
 
-	PRINTD (("[I2C] Best is:\n"));
-	PRINTD (("[I2C] CPU=%dhz RATE=%d F=%d I2MOD=%08x I2BRG=%08x DIFF=%dhz\n",
+	debug("[I2C] Best is:\n");
+	debug("[I2C] CPU=%dhz RATE=%d F=%d I2MOD=%08x I2BRG=%08x DIFF=%dhz\n",
 		hz,
 		speed,
 		bestspeed_filter,
 		bestspeed_modval,
 		bestspeed_brgval,
-		bestspeed_diff));
+		bestspeed_diff);
 
 	i2c->i2c_i2mod |=
 		((bestspeed_modval & 3) << 1) | (bestspeed_filter << 3);
 	i2c->i2c_i2brg = bestspeed_brgval & 0xff;
 
-	PRINTD (("[I2C] i2mod=%08x i2brg=%08x\n", i2c->i2c_i2mod,
-		i2c->i2c_i2brg));
+	debug("[I2C] i2mod=%08x i2brg=%08x\n",
+		i2c->i2c_i2mod,
+		i2c->i2c_i2brg);
 
 	return 1;
 }
@@ -255,7 +247,7 @@ void i2c_init(int speed, int slaveaddr)
 	 * and current CPU rate (we assume sccr dfbgr field is 0;
 	 * divide BRGCLK by 1)
 	 */
-	PRINTD(("[I2C] Setting rate...\n"));
+	debug("[I2C] Setting rate...\n");
 	i2c_setrate(gd->cpu_clk, CONFIG_SYS_I2C_SPEED);
 
 	/* Set I2C controller in master mode */
@@ -270,10 +262,10 @@ void i2c_init(int speed, int slaveaddr)
 	rxbd = (I2C_BD *) ((unsigned char *) &cp->cp_dpmem[iip->iic_rbase]);
 	txbd = (I2C_BD *) ((unsigned char *) &cp->cp_dpmem[iip->iic_tbase]);
 
-	PRINTD(("[I2C] rbase = %04x\n", iip->iic_rbase));
-	PRINTD(("[I2C] tbase = %04x\n", iip->iic_tbase));
-	PRINTD(("[I2C] rxbd = %08x\n", (int)rxbd));
-	PRINTD(("[I2C] txbd = %08x\n", (int)txbd));
+	debug("[I2C] rbase = %04x\n", iip->iic_rbase);
+	debug("[I2C] tbase = %04x\n", iip->iic_tbase);
+	debug("[I2C] rxbd = %08x\n", (int)rxbd);
+	debug("[I2C] txbd = %08x\n", (int)txbd);
 
 	/* Set big endian byte order */
 	iip->iic_tfcr = 0x10;
@@ -308,7 +300,7 @@ static void i2c_newio(i2c_state_t *state)
 	volatile cpm8xx_t *cp = (cpm8xx_t *)&immap->im_cpm;
 	volatile iic_t *iip = (iic_t *)&cp->cp_dparam[PROFF_IIC];
 
-	PRINTD(("[I2C] i2c_newio\n"));
+	debug("[I2C] i2c_newio\n");
 
 #ifdef CONFIG_SYS_I2C_UCODE_PATCH
 	iip = (iic_t *)&cp->cp_dpmem[iip->iic_rpbase];
@@ -321,9 +313,9 @@ static void i2c_newio(i2c_state_t *state)
 	state->tx_buf = (uchar *)state->txbd + NUM_TX_BDS * sizeof(I2C_BD);
 	state->err_cb = NULL;
 
-	PRINTD(("[I2C] rxbd = %08x\n", (int)state->rxbd));
-	PRINTD(("[I2C] txbd = %08x\n", (int)state->txbd));
-	PRINTD(("[I2C] tx_buf = %08x\n", (int)state->tx_buf));
+	debug("[I2C] rxbd = %08x\n", (int)state->rxbd);
+	debug("[I2C] txbd = %08x\n", (int)state->txbd);
+	debug("[I2C] tx_buf = %08x\n", (int)state->tx_buf);
 
 	/* clear the buffer memory */
 	memset((char *)state->tx_buf, 0, MAX_TX_SPACE);
@@ -338,8 +330,8 @@ i2c_send(i2c_state_t *state,
 	volatile I2C_BD *txbd;
 	int i, j;
 
-	PRINTD(("[I2C] i2c_send add=%02d sec=%02d flag=%02d size=%d\n",
-		address, secondary_address, flags, size));
+	debug("[I2C] i2c_send add=%02d sec=%02d flag=%02d size=%d\n",
+		address, secondary_address, flags, size);
 
 	/* trying to send message larger than BD */
 	if (size > I2C_RXTX_LEN)
@@ -352,10 +344,10 @@ i2c_send(i2c_state_t *state,
 	txbd = (I2C_BD *) state->txbd;
 	txbd->addr = state->tx_buf;
 
-	PRINTD(("[I2C] txbd = %08x\n", (int)txbd));
+	debug("[I2C] txbd = %08x\n", (int)txbd);
 
 	if (flags & I2CF_START_COND) {
-		PRINTD(("[I2C] Formatting addresses...\n"));
+		debug("[I2C] Formatting addresses...\n");
 		if (flags & I2CF_ENABLE_SECONDARY) {
 			/* Length of msg + dest addr */
 			txbd->length = size + 2;
@@ -383,15 +375,15 @@ i2c_send(i2c_state_t *state,
 		txbd->status |= BD_SC_LAST | BD_SC_WRAP;
 
 	/* Copy data to send into buffer */
-	PRINTD(("[I2C] copy data...\n"));
+	debug("[I2C] copy data...\n");
 	for(j = 0; j < size; i++, j++)
 		txbd->addr[i] = dataout[j];
 
-	PRINTD(("[I2C] txbd: length=0x%04x status=0x%04x addr[0]=0x%02x addr[1]=0x%02x\n",
+	debug("[I2C] txbd: length=0x%04x status=0x%04x addr[0]=0x%02x addr[1]=0x%02x\n",
 		txbd->length,
 		txbd->status,
 		txbd->addr[0],
-		txbd->addr[1]));
+		txbd->addr[1]);
 
 	/* advance state */
 	state->tx_buf += txbd->length;
@@ -411,8 +403,8 @@ i2c_receive(i2c_state_t *state,
 {
 	volatile I2C_BD *rxbd, *txbd;
 
-	PRINTD(("[I2C] i2c_receive %02d %02d %02d\n",
-		address, secondary_address, flags));
+	debug("[I2C] i2c_receive %02d %02d %02d\n",
+		address, secondary_address, flags);
 
 	/* Expected to receive too much */
 	if (size_to_expect > I2C_RXTX_LEN)
@@ -426,8 +418,8 @@ i2c_receive(i2c_state_t *state,
 	rxbd = (I2C_BD *) state->rxbd;
 	txbd = (I2C_BD *) state->txbd;
 
-	PRINTD(("[I2C] rxbd = %08x\n", (int)rxbd));
-	PRINTD(("[I2C] txbd = %08x\n", (int)txbd));
+	debug("[I2C] rxbd = %08x\n", (int)rxbd);
+	debug("[I2C] txbd = %08x\n", (int)txbd);
 
 	txbd->addr = state->tx_buf;
 
@@ -455,16 +447,16 @@ i2c_receive(i2c_state_t *state,
 		rxbd->status |= BD_SC_WRAP;
 	}
 
-	PRINTD(("[I2C] txbd: length=0x%04x status=0x%04x addr[0]=0x%02x addr[1]=0x%02x\n",
+	debug("[I2C] txbd: length=0x%04x status=0x%04x addr[0]=0x%02x addr[1]=0x%02x\n",
 		txbd->length,
 		txbd->status,
 		txbd->addr[0],
-		txbd->addr[1]));
-	PRINTD(("[I2C] rxbd: length=0x%04x status=0x%04x addr[0]=0x%02x addr[1]=0x%02x\n",
+		txbd->addr[1]);
+	debug("[I2C] rxbd: length=0x%04x status=0x%04x addr[0]=0x%02x addr[1]=0x%02x\n",
 		rxbd->length,
 		rxbd->status,
 		rxbd->addr[0],
-		rxbd->addr[1]));
+		rxbd->addr[1]);
 
 	/* advance state */
 	state->tx_buf += txbd->length;
@@ -487,14 +479,14 @@ static int i2c_doio(i2c_state_t *state)
 	volatile I2C_BD *txbd, *rxbd;
 	volatile int j = 0;
 
-	PRINTD(("[I2C] i2c_doio\n"));
+	debug("[I2C] i2c_doio\n");
 
 #ifdef CONFIG_SYS_I2C_UCODE_PATCH
 	iip = (iic_t *)&cp->cp_dpmem[iip->iic_rpbase];
 #endif
 
 	if (state->tx_idx <= 0 && state->rx_idx <= 0) {
-		PRINTD(("[I2C] No I/O is queued\n"));
+		debug("[I2C] No I/O is queued\n");
 		return I2CERR_QUEUE_EMPTY;
 	}
 
@@ -502,7 +494,7 @@ static int i2c_doio(i2c_state_t *state)
 	iip->iic_tbptr = iip->iic_tbase;
 
 	/* Enable I2C */
-	PRINTD(("[I2C] Enabling I2C...\n"));
+	debug("[I2C] Enabling I2C...\n");
 	i2c->i2c_i2mod |= 0x01;
 
 	/* Begin transmission */
@@ -512,7 +504,10 @@ static int i2c_doio(i2c_state_t *state)
 
 	if (state->tx_idx > 0) {
 		txbd = ((I2C_BD*)state->txbd) - 1;
-		PRINTD(("[I2C] Transmitting...(txbd=0x%08lx)\n", (ulong)txbd));
+
+		debug("[I2C] Transmitting...(txbd=0x%08lx)\n",
+			(ulong)txbd);
+
 		while ((txbd->status & BD_SC_READY) && (j++ < TOUT_LOOP)) {
 			if (ctrlc())
 				return (-1);
@@ -523,7 +518,10 @@ static int i2c_doio(i2c_state_t *state)
 
 	if ((state->rx_idx > 0) && (j < TOUT_LOOP)) {
 		rxbd = ((I2C_BD*)state->rxbd) - 1;
-		PRINTD(("[I2C] Receiving...(rxbd=0x%08lx)\n", (ulong)rxbd));
+
+		debug("[I2C] Receiving...(rxbd=0x%08lx)\n",
+			(ulong)rxbd);
+
 		while ((rxbd->status & BD_SC_EMPTY) && (j++ < TOUT_LOOP)) {
 			if (ctrlc())
 				return (-1);
-- 
1.7.6.4